Advertisement

Journal of Oceanology and Limnology

, Volume 37, Issue 6, pp 1921–1928 | Cite as

Stable-thickness study of masonry block on the inner slope of dikes

  • Tianting Sun
  • Qingjun Liu
  • Dengting WangEmail author
Article

Abstract

Dike failure caused by overtopping is likely to result in major casualties and property losses. Aiming at this fact, a series of physical model experiments were conducted on stable thickness of masonry block on the inner slope of the dike. According to the erosion of block embankment with different thicknesses, the relation between the stable thickness of masonry block pitching of the inner slope and the average overtopping discharge is discussed. New equations subject to irregular waves are presented for average overtopping discharge, based upon the analysis of mean overtopping discharge and comparison of present overtopping discharge formulas at domestic and abroad. Finally, a calculation equation of the stable thickness of the dry masonry block stone of inner slope subject to irregular waves is given. In conclusion, the formula matches well with the experiment result, which is capable of functioning as an important reference for structure designs of the dike in China.

Keyword

mean overtopping discharge block revetment inner slope stable thickness 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgement

The laboratory experiments were conducted in Nanjing Hydraulic Research Institute. Thanks are extended to CHEN Weiqiu and ZHU Jialing, for their support of the experiments.

References

  1. Dodd N. 1998. Numerical model of wave run-up, overtopping, and regeneration. Journal of Waterway, Port, Coastal, and Ocean Engineering, 124 (2): 73–81,  https://doi.org/10.1061/(ASCE)0733-950X(1998)124:2(73).CrossRefGoogle Scholar
  2. Etemad-Shahidi A, Shaeri S, Jafari E. 2016. Prediction of wave overtopping at vertical structures. Coastal Engineering, 109: 42–52,  https://doi.org/10.1016/j.coastaleng.2015.12.001.CrossRefGoogle Scholar
  3. Hebsgaard M, Sloth P, Juhl J. 1998. Wave overtopping of rubble mound breakwaters. In: Proceedings of the 26th International Conference on Coastal Engineering. American Society of Civil Engineers, Copenhagen, Denmark,  https://doi.org/10.1061/9780784404119.167.Google Scholar
  4. Hughes S A, Nadal N C. 2009. Laboratory study of combined wave overtopping and storm surge overflow of a levee. Coastal Engineering, 56 (3): 244–259,  https://doi.org/10.1016/j.coastaleng.2008.09.005.CrossRefGoogle Scholar
  5. Li L, Amini F, Pan Y, Li C. 2014. Stability monitoring of articulated concrete block strengthened levee in combined wave and surge overtopping conditions. In: Proceedings of Geo-Congress 2014. American Society of Civil Engineers, Atlanta, Georgia,  https://doi.org/10.1061/9780784413272.026.Google Scholar
  6. Li X L, Yu Y X, Zhao F Y, Lu G R. 2007. Experimental study on mean overtopping discharge of sloping seawall under oblique and multidirectional irregular waves. Acta Oceanologica Sinica, 29 (1): 139–149,  https://doi.org/10.3321/j.issn:0253-4193.2007.01.020. (in Chinese with English abstract)Google Scholar
  7. Owen M W. 1980. Design of Seawalls Allowing for Wave Overtopping. HR Wallingford, Wallingford, UK.Google Scholar
  8. Pan J N, Wang D T, Wu M A, Yang Z J. 2005. Experimental study on stability of concrete block revetment under wave action. Journal of Hohai University (Natural Sciences), 33 (4): 476–481,  https://doi.org/10.3321/j.issn:1000-1980.2005.04.029. (in Chinese with English abstract)Google Scholar
  9. Pan Y, Li L, Amini F, Kuang C P. 2015. Overtopping erosion and failure mechanism of earthen levee strengthened by vegetated HPTRM system. Ocean Engineering, 96: 139–148,  https://doi.org/10.1016/j.oceaneng.2014.12.012.CrossRefGoogle Scholar
  10. Pullen T, Allsop N W H, Bruce T, Kortenhaus A, Schüttrumpf H, Van der Meer J W. 2007. EurOtop, European Overtopping Manual - Wave Overtopping of Sea Defences and Related Structures: Assessment Manual. Envrionment Agency, ENW, KFKI. 201p.Google Scholar
  11. Schüttrumpf H, Oumeraci H. 2005. Layer thicknesses and velocities of wave overtopping flow at seadikes. Coastal Engineering, 52 (6): 473–495,  https://doi.org/10.1016/j.coastaleng.2005.02.002.CrossRefGoogle Scholar
  12. Van der Meer J W, Bruce T. 2014. New physical insights and design formulas on wave overtopping at sloping and vertical structures. Journal of Waterway, Port, Coastal, and Ocean Engineering, 140 (6): 04014025,  https://doi.org/10.1061/(ASCE)WW.1943-5460.0000221.CrossRefGoogle Scholar
  13. Van der Meer J W, Janssen W. 1995. Wave run-up and wave overtopping at dikes. In: Kobayashi N, Demirbilek Z eds. Wave Forces on Inclined and Vertical Wall Structures. American Society of Civil Engineers, New York. p.175–189.Google Scholar
  14. Van Gent M R A. 1999. Physical Model Investigations on Coastal Structures with Shallow Foreshores: 2D Model Tests with Single and Double-peaked Wave Energy Spectra. Delft Hydraulics/Waterbouwkundig Laboratorium, Delft, The Netherlands.Google Scholar

Copyright information

© Chinese Society for Oceanology and Limnology, Science Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Nanjing Hydraulic Research InstituteNanjingChina
  2. 2.Key Lab of Port, Waterway and Sedimentation Engineering of MOTNanjingChina

Personalised recommendations