Advertisement

Permeation characterization and modelling of polyethylene/clay nanocomposites for packaging

  • Yasir Qayyum GillEmail author
  • Mo Song
  • Umer Abid
Original Paper
  • 7 Downloads

Abstract

The approach of upgrading barrier properties of polymer with nanofillers is effectual and well established now-a-days to manufacture films and quality packaging. This research deals with enhancement of barrier attributes of clay-based high density polyethylene nanocomposites against oxygen and water permeability. Na-Montmorillonite and two grades of kaolin clays were used for HDPE/clay nanocomposites preparation in twin-screw extruder with temperature profile of 160, 170, 180, 190 and 200 °C along the extruder at 110 rpm with clay loading up to 10 wt%. The extent of maximum reduction in water and oxygen vapors permeation was more prominent at 5 wt% sample of each clay. XRD analysis revealed no exfoliation in kaolin clay samples but indicated presence of exfoliation in Na-MMT samples. SEM and TEM micrographs revealed nano-level dispersion for both kaolin clays and Na-MMT and agglomerate formation at high wt% of clays. Experimental data for oxygen and water vapors permeation through nanocomposites were fitted on Nielsen, Cussler and Gusev–Lutsi models. Modelling of barrier performance was utilized for acquiring aspect ratio of filler for nanocomposites. Maximum and average aspect ratio of fillers and third-degree polynomial equation for nanocomposite, through curve fitting, were determined to predict improved barrier properties of nanocomposites.

Keywords

Modelling Kaolin Packaging HDPE Nanocomposites Barrier 

Notes

References

  1. 1.
    Kotsilkova R (2007) Thermoset nanocomposites for engineering applications. Smithers Rapra Tecchnology, ShawburyGoogle Scholar
  2. 2.
    Thomas S, Stephen R (2010) Rubber Nanocomposites: preparation, properties, and applications. Wiley, SingaporeCrossRefGoogle Scholar
  3. 3.
    Silvestre C, Duraccio D, Cimmino S (2011) Food packaging based on polymer nanomaterials. Prog Polym Sci 36:1766–1782CrossRefGoogle Scholar
  4. 4.
    Suprakas SR, Masami O (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641CrossRefGoogle Scholar
  5. 5.
    Kiliaris P, Papaspyrides CD (2010) Polymer/layered silicate (clay) nanocomposites: an overview of flame retardancy. Prog Polym Sci 35(7):902–958CrossRefGoogle Scholar
  6. 6.
    Zheng QH, Yu AB, Lu GQ, Paul DR (2005) Clay-based polymer nanocomposites: research and commercial development. J Nanosci Nanotechnol 5:1574–1592CrossRefGoogle Scholar
  7. 7.
    Pinnavaia TJ, Beall GW (2000) Polymer clay nano-composites. Wiley, New YorkGoogle Scholar
  8. 8.
    Gómez M, Palza H, Quijada R (2016) Influence of organically-modified montmorillonite and synthesized layered silica nanoparticles on the properties of polypropylene and polyamide-6 nanocomposites. Polymers 386(8):1–15Google Scholar
  9. 9.
    Romanzini D, Piroli V, Frache A, Zattera AJ, Amico SC (2015) Sodium montmorillonite modified with methacryloxy and vinylsilanes: influence of silylation on the morphology of clay/unsaturated polyester nanocomposites. Appl Clay Sci 114:550–557CrossRefGoogle Scholar
  10. 10.
    Araujo EM, Barbosa R, Rodrigues AWB, Melo TJA, Ito EN (2007) Processing and characterization of polyethylene/Brazilian clay nanocomposites. Mater Sci Eng, A 445–446:141–147CrossRefGoogle Scholar
  11. 11.
    Mallakpour S, Barati A (2012) Application of modified cloisite Na + with LPhenylalanine for the preparation of new poly(vinyl alcohol)/organoclay bionanocomposite films. Polym-Plast Technol 51:321–327CrossRefGoogle Scholar
  12. 12.
    Möller MW, Kunz DA, Lunkenbein T, Sommer S (2012) UV-cured, flexible, and transparent nanocomposite-coating with remarkable oxygen barrier. Adv Mater 24:2142–2147CrossRefGoogle Scholar
  13. 13.
    Koo J (2006) Polymer nanocomposites: processing, characterization, and applications. McGraw-Hill, New YorkGoogle Scholar
  14. 14.
    Dazhu C, Haiyang Y, Pingsheng H, Weian Z (2005) Rheologicaland extrusion behavior of intercalated high-impact/organomontmorillonite nanocomposites. Compos Sci Technol 65:1593–1600CrossRefGoogle Scholar
  15. 15.
    Reddy CS, Ratna D, Das CK (2008) Polyethylene nanocomposites by gas-phase polymerization of ethylene in the presence of a nanosilica-supported zirconocene catalyst system. Polym Int 57(2):282–291CrossRefGoogle Scholar
  16. 16.
    Gill YQ, Jin J, Song M (2015) Melt flow behavior of high density polyethylene nanocomposites with 1D, 2D and 3D nanofillers. Nanocomposites 1(3):160–169CrossRefGoogle Scholar
  17. 17.
    Villanueva MP, Cabedo L, Giménez E, Lagarón JM, Coates PD, Kelly AL (2009) Study of dispersion of nanoclays in a LDPE matrix using microscopy and in-process ultrasonic monitoring. Polym Test 28:277–287CrossRefGoogle Scholar
  18. 18.
    Villanueva MP, Cabedo L, Lagaron JM, Gimenez E (2010) Comparative study of nanocomposites of polyolefin compatibilizers containing kaolinite and montmorillonite organoclays. J Appl Polym Sci 115:1325–1335CrossRefGoogle Scholar
  19. 19.
    Mittal V (2010) Barrier properties of polymer clay nanocomposites. Nova Science Publishers Inc, New YorkCrossRefGoogle Scholar
  20. 20.
    Mittal V (2007) Mechanical and gas permeation properties of compatibilized polypropylene–layered silicate nanocomposites. J Appl Polym Sci 107(2):1350–1361CrossRefGoogle Scholar
  21. 21.
    Bhattacharya M, Biswas S, Bhowmick AK (2011) Permeation characteristics and modeling of barrier properties of multifunctional rubber nanocomposites. Polymer 52:1562–1576CrossRefGoogle Scholar
  22. 22.
    Alexandre B, Colasse L, Langevin D, Médéric P, Aubry T, Chappey C, Marais S (2010) Transport mechanisms of small molecules through polyamide 12/montmorillonite nanocomposites. J Phys Chem B 114(27):8827–8837CrossRefGoogle Scholar
  23. 23.
    Mittal V (2013) Modelling and prediction of barrier properties of polymer layered silicate nanocomposites. Polym Polym Compos 21(8):509–518Google Scholar
  24. 24.
    Sun L, Boo WJ, Clearfield A, Sue H-J, Pham HQ (2008) Barrier properties of model epoxy nanocomposites. J Membr Sci 318(1–2):129–136CrossRefGoogle Scholar
  25. 25.
    Meneghetti P, Shaikh S, Qutubuddin S, Nazarenko S (2008) Synthesis and characterization of styrene-butadiene rubber-clay nanocomposites with enhanced mechanical and gas barrier properties. Rubb Chem Technol 81(5):821–841CrossRefGoogle Scholar
  26. 26.
    Mastromatteo M, Conte A, Previtali MA, Nobile MAD (2016) Simplified approach based on polynomial equations to predict the permeability of micro-perforated polymeric films. Packag Technol Sci 29:549–558CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of MaterialsLoughborough UniversityLoughboroughUK
  2. 2.Department of Polymer and Process EngineeringUniversity of Engineering and TechnologyLahorePakistan

Personalised recommendations