Advertisement

Polymer Bulletin

, Volume 76, Issue 2, pp 627–646 | Cite as

A new dual hydrophilic–hydrophobic acrylic resin containing pyridine and 1,3,4-oxadiaxole moieties for removal of Co(II)ions

  • Masoumeh Mirzaeinejad
  • Yagoub MansooriEmail author
Original Paper
  • 62 Downloads

Abstract

The present study reports the synthesis and characterization of a new acrylamide-based monomer containing pyridine and 1,3,4-oxadiazole moieties, N-(4-(5-(pyridin-2-yl)-1,3,4-oxadiazol-2-l)phenyl) acrylamide (POPA). The adsorbent resin was obtained by free radical copolymerization of POPA and acrylamide with a ratio of 9:91 mol% in the presence of N,N′-methylenebisacrylamide (MBA) as cross-linking agent. Thermal properties of poly(POPA), poly(acrylamide) and the cross-linked resin were assessed by thermogravimetric analysis and differential thermal analysis. The capability of cross-linked resin to remove Co(II) cations was shown under optimal adsorption time, pH and adsorbent mass. The adsorption kinetics obeyed the pseudo-second-order kinetic equation, and the Langmuir model described the adsorption isotherm with a maximum adsorption capacity of 24.10 mg g−1. In addition, the resin was regenerated by simply washing with 0.1 M aqueous solution of HCl, and no significant decrease was observed in the extraction efficiency following the test of up to eight cycles. The current findings suggest that the obtained resin is a stable and reusable adsorbent that can be potentially applied to water treatments for the efficient removal of Co(II) cations.

Keywords

Poly(acrylamide) Removal of Co(II) 1,3,4-Oxadiaxole Cross-linked resin 

Notes

Acknowledgements

The authors would like to acknowledge the financial support of the project from The Graduate Council of the University of Mohaghegh Ardabili.

References

  1. 1.
    O’Connell DW, Birkinshaw C, O’Dwyer TF (2008) Heavy metal adsorbents prepared from the modification of cellulose: a review. Bioresour Technol 99:6709–6724CrossRefGoogle Scholar
  2. 2.
    Lapwanit S, Trakulsujaritchok T, Nongkhai PN (2016) Chelating magnetic copolymer composite modified by click reaction for removal of heavy metal ions from aqueous solution. Chem Eng J 289:286–295CrossRefGoogle Scholar
  3. 3.
    Cui Y, Chen Q, Zhang D-D, Cao J, Han B-H (2010) Triphenylamine-based fluorescent conjugated copolymers with pendant terpyridyl ligands as chemosensors for metal ions. J Polym Sci A Polym Chem 48:1310–1316CrossRefGoogle Scholar
  4. 4.
    Kurniawan TA, Chan GYS, Lo W-h, Babel S (2006) Comparisons of low-cost adsorbents for treating wastewaters laden with heavy metals. Sci Total Environ 366:409–426CrossRefGoogle Scholar
  5. 5.
    Masoumi A, Ghaemy M, Bakht AN (2014) Removal of metal ions from water using poly(MMA-co-MA)/modified-Fe3O4 magnetic nanocomposite: isotherm and kinetic study. Ind Eng Chem Res 53:8188–8197CrossRefGoogle Scholar
  6. 6.
    Azizi P, Golshekan M, Shariati S, Rahchamani J (2015) Solid phase extraction of Cu2+, Ni2+, and Co2+ ions by a new magnetic nano-composite: excellent reactivity combined with facile extraction and determination. Environ Monit Assess 187:185CrossRefGoogle Scholar
  7. 7.
    Lewis AE (2010) Review of metal sulphide precipitation. Hydrometallurgy 104:222–234CrossRefGoogle Scholar
  8. 8.
    Mungray AA, Kulkarni SV, Mungray AK (2012) Removal of heavy metals from wastewater using micellar enhanced ultrafiltration technique: a review. Cent Eur J Chem 10:27–46CrossRefGoogle Scholar
  9. 9.
    Maturana HA, Perič IM, Rivas BL, Amalia Pooley S (2011) Interaction of heavy metal ions with an ion exchange resin obtained from a natural polyelectrolyte. Polym Bull 67:669–676CrossRefGoogle Scholar
  10. 10.
    Ramasahayam SK, Gunawan G, Finlay C, Viswanathan T (2012) Renewable resource-based magnetic nanocomposites for removal and recovery of phosphorous from contaminated waters. Water Air Soil Pollut 223:4853–4863CrossRefGoogle Scholar
  11. 11.
    Chen Y, He M, Wang C, Wei Y (2014) A novel polyvinyltetrazole-grafted resin with high capacity for adsorption of Pb(II), Cu(II) and Cr(III) ions from aqueous solutions. J Mater Chem A 2:10444–10453CrossRefGoogle Scholar
  12. 12.
    Cegłowski M, Schroeder G (2015) Preparation of porous resin with Schiff base chelating groups for removal of heavy metal ions from aqueous solutions. Chem Eng J 263:402–411CrossRefGoogle Scholar
  13. 13.
    Lin Z, Zhang Y, Chen Y, Qian H (2012) Extraction and recycling utilization of metal ions (Cu2+, Co2+ and Ni2+) with magnetic polymer beads. Chem Eng J 200–202:104–112CrossRefGoogle Scholar
  14. 14.
    Gupta VK, Ganjali MR, Nayak A, Bhushan B, Agarwal S (2012) Enhanced heavy metals removal and recovery by mesoporous adsorbent prepared from waste rubber tire. Chem Eng J 197:330–342CrossRefGoogle Scholar
  15. 15.
    Ciesielczyk F, Bartczak P, Wieszczycka K, Siwińska-Stefańska K, Nowacka M, Jesionowski T (2013) Adsorption of Ni(II) from model solutions using co-precipitated inorganic oxides. Adsorption 19:423–434CrossRefGoogle Scholar
  16. 16.
    Klapiszewski L, Madrawska M, Jesionowski T (2012) Preparation and characterisation of hydrated silica/lignin biocomposites. Physicochem Probl Miner Process 48:463–473Google Scholar
  17. 17.
    Dowling KC, Thomas JK (1990) A novel micellar synthesis and photophysical characterization of water-soluble acrylamide-styrene block copolymers. Macromolecules 23:1059–1064CrossRefGoogle Scholar
  18. 18.
    Ng WK, Tam KC, Jenkins RD (1999) Evaluation of intrinsic viscosity measurements of hydrophobically modified polyelectrolyte solutions. Eur Polym J 35:1245–1252CrossRefGoogle Scholar
  19. 19.
    Gomez-Valdemoro A, San-Jose N, Garcia FC, De La Pena JL, Serna F, Garcia JM (2010) Novel aromatic polyamides with main chain and pendant 1,2,4-triazole moieties and their application to the extraction/elimination of mercury cations from aqueous media. Polym Chem 1:1291–1301CrossRefGoogle Scholar
  20. 20.
    Akkaya T, Gülfen M, Olgun U (2013) Adsorption of rhodium(III) ions onto poly(1,8-diaminonaphthalene) chelating polymer: equilibrium, kinetic and thermodynamic study. React Funct Polym 73:1589–1596CrossRefGoogle Scholar
  21. 21.
    Xiong C, Li Y, Wang G, Fang L, Zhou S, Yao C, Chen Q, Zheng X, Qi D, Fu Y, Zhu Y (2015) Selective removal of Hg(II) with polyacrylonitrile-2-amino-1,3,4-thiadiazole chelating resin: batch and column study. Chem Eng J 259:257–265CrossRefGoogle Scholar
  22. 22.
    Yahaya GO, Ahdab AA, Ali SA, Abu-Sharkh BF, Hamad EZ (2001) Solution behavior of hydrophobically associating water-soluble block copolymers of acrylamide and N-benzylacrylamide. Polymer 42:3363–3372CrossRefGoogle Scholar
  23. 23.
    Yavuz E, Senkal BF, Bicak N (2005) Poly(acrylamide) grafts on spherical polyvinyl pyridine resin for removal of mercury from aqueous solutions. React Funct Polym 65:121–125CrossRefGoogle Scholar
  24. 24.
    Gómez-Valdemoro A, Trigo M, Ibeas S, García FC, Serna F, García JM (2011) Acrylic copolymers with pendant 1,2,4-triazole moieties as colorimetric sensory materials and solid phases for the removal and sensing of cations from aqueous media. J Polym Sci A Polym Chem 49:3817–3825CrossRefGoogle Scholar
  25. 25.
    Mansoori Y, Mohsenzadeh R (2015) Designed polyamides based on 1,4-bis[(4-aminophenyl)-1,3,4-oxadiazolyl]phenylene (BAPO) for removal of Cu(II) and Co(II). Des Monomers Polym 18:333–342CrossRefGoogle Scholar
  26. 26.
    Mansoori Y, Ghanbari M (2015) Novel polyimides obtained from a new aromatic diamine (BAPO) containing pyridine and 1,3,4-oxadiazole moieties for removal of Co(II) and Ni(II) ions. Polym Adv Technol 26:658–664CrossRefGoogle Scholar
  27. 27.
    Gallardo H, Magnago R, Bortoluzzi AJ (2001) Synthesis, characterization and mesomorphic properties of Ag(I) and Pd(II) complexes containing the pyridyl and tetrazoyl rings: crystal structure of [C30H46N10Ag ClO4]. Liq Cryst 28:1343–1352CrossRefGoogle Scholar
  28. 28.
    Mansoori Y, Fathollahi K, Zamanlou MR, Imanzadeh G (2011) Novel POBD-modified organoclay and its polyimide nanocomposites for removal of the Co(II) ion. Polym Compos 32:1862–1873CrossRefGoogle Scholar
  29. 29.
    Ding J, Day M, Robertson G, Roovers J (2002) Synthesis and characterization of alternating copolymers of fluorene and oxadiazole. Macromolecules 35:3474–3483CrossRefGoogle Scholar
  30. 30.
    Du M, Li C-P, Guo J-H (2006) Distinct Cd(II) and Co(II) thiocyanate coordination complexes with 2,5-bis(pyrazinyl)-1,3,4-oxadiazole: metal-directed assembly of a 1-D polymeric chain and a 3-D supramolecular network. Inorg Chim Acta 359:2575–2582CrossRefGoogle Scholar
  31. 31.
    Lagergren S (1898) Zur Theorie der Sogenannten Absorption gelöster Stoffe: PA Norstedt & sönerGoogle Scholar
  32. 32.
    Ho YS, McKay G (1998) Sorption of dye from aqueous solution by peat. Chem Eng J 70:115–124CrossRefGoogle Scholar
  33. 33.
    Justi KC, Laranjeira MCM, Neves A, Mangrich AS, Fávere VT (2004) Chitosan functionalized with 2[-bis-(pyridylmethyl) aminomethyl]4-methyl-6-formyl-phenol: equilibrium and kinetics of copper (II) adsorption. Polymer 45:6285–6290CrossRefGoogle Scholar
  34. 34.
    Vasconcelos HL, Camargo TP, Gonçalves NS, Neves A, Laranjeira MCM, Fávere VT (2008) Chitosan crosslinked with a metal complexing agent: synthesis, characterization and copper(II) ions adsorption. React Funct Polym 68:572–579CrossRefGoogle Scholar
  35. 35.
    Hashemian S, Saffari H, Ragabion S (2014) Adsorption of cobalt(II) from aqueous solutions by Fe3O4/bentonite nanocomposite. Water Air Soil Pollut 226:2212CrossRefGoogle Scholar
  36. 36.
    Qiu X, Li N, Yang S, Chen D, Xu Q, Li H, Lu J (2015) A new magnetic nanocomposite for selective detection and removal of trace copper ions from water. J Mater Chem A 3:1265–1271CrossRefGoogle Scholar
  37. 37.
    Hossein Beyki M, Shemirani F, Shirkhodaie M (2016) Aqueous Co(II) adsorption using 8-hydroxyquinoline anchored γ-Fe2O3@chitosan with Co(II) as imprinted ions. Int J Biol Macromol 87:375–384CrossRefGoogle Scholar
  38. 38.
    Rajput S, Pittman CU Jr, Mohan D (2016) Magnetic magnetite (Fe3O4) nanoparticle synthesis and applications for lead (Pb2+) and chromium (Cr6+) removal from water. J Colloid Interface Sci 468:334–346CrossRefGoogle Scholar
  39. 39.
    Sobhanardakani S, Ahmadi M, Zandipak R (2016) Efficient removal of Cu(II) and Pb(II) heavy metal ions from water samples using 2,4-dinitrophenylhydrazine loaded sodium dodecyl sulfate-coated magnetite nanoparticles. J Water Supply Res Technol 65:361–372CrossRefGoogle Scholar
  40. 40.
    Basavaraja C, Jo EA, Huh DS (2010) Characterization and magnetic properties of conducting poly(N-vinylcarbazole)-capped magnetite nanocomposite Langmuir–Schaefer films. Mater Lett 64:762–764CrossRefGoogle Scholar
  41. 41.
    Mittal H, Ballav N, Mishra SB (2014) Gum ghatti and Fe3O4 magnetic nanoparticles based nanocomposites for the effective adsorption of methylene blue from aqueous solution. J Ind Eng Chem 20:2184–2192CrossRefGoogle Scholar
  42. 42.
    Badruddoza AZM, Hazel GSS, Hidajat K, Uddin MS (2010) Synthesis of carboxymethyl-β-cyclodextrin conjugated magnetic nano-adsorbent for removal of methylene blue. Colloids Surf A Physicochem Eng Asp 367:85–95CrossRefGoogle Scholar
  43. 43.
    Manohar DM, Noeline BF, Anirudhan TS (2006) Adsorption performance of Al-pillared bentonite clay for the removal of cobalt(II) from aqueous phase. Appl Clay Sci 31:194–206CrossRefGoogle Scholar
  44. 44.
    Coşkun R, Soykan C, Saçak M (2006) Removal of some heavy metal ions from aqueous solution by adsorption using poly(ethylene terephthalate)-g-itaconic acid/acrylamide fiber. React Funct Polym 66:599–608CrossRefGoogle Scholar
  45. 45.
    Park Y, Lee Y-C, Shin WS, Choi S-J (2010) Removal of cobalt, strontium and cesium from radioactive laundry wastewater by ammonium molybdophosphate–polyacrylonitrile (AMP–PAN). Chem Eng J 162:685–695CrossRefGoogle Scholar
  46. 46.
    Wang Q, Li J, Chen C, Ren X, Hu J, Wang X (2011) Removal of cobalt from aqueous solution by magnetic multiwalled carbon nanotube/iron oxide composites. Chem Eng J 174:126–133CrossRefGoogle Scholar
  47. 47.
    Liu M, Chen C, Hu J, Wu X, Wang X (2011) Synthesis of magnetite/graphene oxide composite and application for cobalt(II) removal. J Phys Chem C 115:25234–25240CrossRefGoogle Scholar
  48. 48.
    Mahmoud MR, Rashad GM, Metwally E, Saad EA, Elewa AM (2017) Adsorptive removal of 134Cs+, 60Co2+ and 152 + 154Eu3+ radionuclides from aqueous solutions using sepiolite: single and multi-component systems. Appl Clay Sci 141:72–80CrossRefGoogle Scholar
  49. 49.
    Moawed EA, El-Hagrasy MA, Embaby NEM (2017) Substitution influence of halo polyurethane foam on the removal of bismuth, cobalt, iron and molybdenum ions from environmental samples. J Taiwan Inst Chem Eng 70:382–390CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Applied Chemistry, Faculty of ScienceUniversity of Mohaghegh ArdabiliArdabilIran

Personalised recommendations