Advertisement

Effective thermal conductivity of unsaturated granular geocomposite using lattice element method

  • Dinesh ShresthaEmail author
  • Zarghaam Haider Rizvi
  • Frank Wuttke
Original
  • 82 Downloads

Abstract

Soil thermal conductivity has an important role in geo-energy applications and heat transfer modelling. The performances and efficiencies of such applications are strongly affected by the saturation conditions, especially at the lower saturation, which can negatively affect the soil thermal conductivity. Therefore, it is essential to improve the soil thermal conductivity at lower saturation levels. Here, we investigate the effect of the fillers, soil gradation and the water saturation on the thermal conductivity of sand as an innovative improvement method. The experimental results show a significant improvement in the thermal conductivity at dry and lower saturation degrees and a considerable improvement in the case of full saturation. The improvement in the thermal conductivity is comparatively high in dry state and is decreasing with increase in the saturation. The existing soil thermal conductivity models, which are limited to a specific boundary conditions and soil types, fail to consider the effect of soil filler composite behaviour. Therefore, a mesoscale numerical method is developed to model the change in effective thermal conductivity. The developed model shows a good agreement with the measured thermal conductivity values.

Notes

Acknowledgements

This research project is financially supported by the research grant ZF4016802HF5 and 03G0866B (GeoMInt), provided by the Federal Ministry of Education and Research, Germany.

References

  1. 1.
    Sandiford P (1981) Cable backfill materials-state-of-the-art. Proceedings of the Symposium on Underground Cable Thermal backfill, Toronto, pp 3–9Google Scholar
  2. 2.
    Mozan MA, El-Kady MA, Mazi AA (1997) Advanced thermal analysis of underground power cables. Record of the Fifth International Middle East Power Conference MEPCON'97, Alexandria, pp 506–510Google Scholar
  3. 3.
    Afa JT (2010) Subsoil temperature and underground cable dis-tribution in Port Harcourt City. Res J Appl Sci Eng Technol 2(6):527–531Google Scholar
  4. 4.
    de Leόn F, Anders GJ (2008) Effects of backfilling on cable ampacity analyzed with the finite element method. IEEE Transactions on Power Delivery 23(2):537–543CrossRefGoogle Scholar
  5. 5.
    Karahan M, Kalenderli O (2011) Heat transfer-engineering applications. In: V. Vikhrenko (eds.), Coupled Electrical and Thermal Analysis of Power Cables Using Finite Element Method, 205–230Google Scholar
  6. 6.
    Venuleo S, Laloui L, Terzis D, Hueckel T, Hassan M (2015) Effect of microbially induced calcite precipitation on soil thermal conductivity. Géotechnique Letters 00:1–6Google Scholar
  7. 7.
    Shrestha D, Hailemariam H, Wuttke F (2016) Enhancement of soil thermal conductivity in dry condition. In: Energy Geotechnics-Proceedings of the 1st International Conference on Energy Geotechnics, ICEGT 2016,  https://doi.org/10.1201/b21938-64
  8. 8.
    Rizvi ZH, Shrestha D, Sattari AS et al (2017) Numerical modelling of effective thermal conductivity for modified geomaterial using lattice element method. Heat Mass Transf.  https://doi.org/10.1007/s00231-017-2140-2
  9. 9.
    Yun TS, Santamarina JC (2007) Fundamental study of thermal conduction in dry soils. Granul Matter 10(3):197–207CrossRefzbMATHGoogle Scholar
  10. 10.
    Johansen O (1975) Ph.D. diss. Norwegian Univ. of Science and Technol, Thermal conductivity of soils. Trondheim (CRREL draft transl. 637, 1977)Google Scholar
  11. 11.
    Farouki OT (1981) Thermal properties of soils, CRREL Monograph 81–1, US Army Corps of Engineers, Cold Regions Research and Engineering Laboratory, Hanover, N.HGoogle Scholar
  12. 12.
    Côté J, Konrad JM (2005a) A generalized thermal conductivity model for soils and construction materials. Can Geotech J 42:443–458CrossRefGoogle Scholar
  13. 13.
    Lu S, Ren T, Gong Y, Horton R (2007) An improved model for predicting soil thermal conductivity from water content at room temperature. Soil Sci Soc Am J 71:8–14CrossRefGoogle Scholar
  14. 14.
    Mori T, Tanaka K (1973) Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 21(5):571–574CrossRefGoogle Scholar
  15. 15.
    Gruescu C, Giraud A, Homand F, Kondo D, Do DP (2007) Effective thermal conductivity of partially saturated porous rocks. Int J Solids Struct 44(3):811–833CrossRefzbMATHGoogle Scholar
  16. 16.
    El Moumen A, Kanit T, Imad A, El Minor H (2015) Computational thermal conductivity in porous materials using homogenization techniques: numerical and statistical approaches. Comput Mater Sci 97:148–158CrossRefGoogle Scholar
  17. 17.
    Łydżba D, Różański A, Rajczakowska M, Stefaniuk D (2017) Random checkerboard based homogenization for estimating efective thermal conductivity of fully saturated soils. J Rock Mech Geotech Eng 9:18–28CrossRefGoogle Scholar
  18. 18.
    Nikolic M, Ibrahimbegovic A (2015) Rock mechanics model capable of representing initial heterogeneities and full set of 3d failure mechanisms. Comput Methods Appl Mech Eng 290:209–227MathSciNetCrossRefGoogle Scholar
  19. 19.
    Nikolic M, Ibrahimbegovic A, Miscevic P (2015) Brittle and ductile failure of rocks: Embedded discontinuity approach for representing mode i and mode ii failure mechanisms. Int J Numer Methods Eng 102:1507–1526MathSciNetCrossRefzbMATHGoogle Scholar
  20. 20.
    Nikolic M, Karavelic E, Ibrahimbegovic A, Miscevic P (2017) Lattice element models and their peculiarities. Arch Comput Methods Eng.  https://doi.org/10.1007/s11831-017-9210-y
  21. 21.
    Wuttke F, Sattari AS, Rizvi ZH, Motra HB (2016) Advanced mesoscale modelling to study the effective thermo-mechanical parameter in solid geomaterial. Springer Ser Geomech Geoeng.  https://doi.org/10.1007/978-3-319-52773-4_9
  22. 22.
    Nikolic M, Do XN, Ibrahimbegovic A, Nikolic Z (2018) Crack propagation in dynamics by embedded strong discontinuity approach: Enhanced solid versus discrete lattice model. Comput Methods Appl Mech Eng 340:480–499MathSciNetCrossRefGoogle Scholar
  23. 23.
    Rizvi ZH, Sattari AS, Wuttke F (2016) Numerical analysis of heat conduction in granular geo-material using lattice element method, In Energy Geotechnics-Proceedings of the 1st International Conference on Energy Geotechnics, ICEGT 2016,  https://doi.org/10.1201/b21938-58
  24. 24.
    Sattari AS, Rizvi ZH, Motra HB et al (2017) Meso-scale modeling of heat transport in a heterogeneous cemented geomaterial by lattice element method. Granul Matter 19:66CrossRefGoogle Scholar
  25. 25.
    Fuller WB, Thomsan SE (1907) The laws of proportioning concrete. Trans ASCE 59(2):67–143Google Scholar
  26. 26.
    ASTM (2008) Standard test method for determination of thermal conductivity of soil and soft rock by thermal needle probe procedure, ASTM 5334–08Google Scholar
  27. 27.
    IEEE (1992) Guide for soil thermal resistivity measurements. Inst. of Electrical and Electronics Engineers, Inc., New YorkGoogle Scholar
  28. 28.
    Haigh SK (2012) Thermal conductivity of sands. Géotechnique 62(7):617–625CrossRefGoogle Scholar
  29. 29.
    Springel V (2011) Smoothed Particle Hydrodynamics in Astrophysics. ARAA 2010(48):391Google Scholar
  30. 30.
    Rizvi ZH, Khan MA, Wuttke F, Ahmad J (2018) Effective physical parameter evaluation of shallow crustal rocks by lattice element method. ICAMME2018, International Conference on Materials and Manufacturing Engineering, Materials Today: ProceedingsGoogle Scholar
  31. 31.
    Sattari AS, Motra HB, Rizvi ZH, Wuttke F (2018) A new lattice element method (LEM) with integrated interface elements for determining the effective thermal conductivity of rock solids under thermo-mechanical processes. International Symposium on Energy Geotechnics (SEG), LausanneGoogle Scholar
  32. 32.
    Yovanovich MM (1973) Apparent conductivity of glass microspheres from atmospheric pressure to vacuum. ASME Paper 73-HT-43, American Society of Mechanical EngineersGoogle Scholar
  33. 33.
    Kennard EH (1938) Kinetic Theory of Gases. McGraw-Hill, New YorkGoogle Scholar
  34. 34.
    Masamune S, Smith JM (1963) Thermal conductivity of beds of spherical particles. I & EC Fundamentals 2(2):136–143CrossRefGoogle Scholar
  35. 35.
    Askari R, Taheri S, Hejazi SH (2015) Thermal conductivity of granular porous media: A pore scale modeling approach. AIP Adv 5:097106.  https://doi.org/10.1063/1.4930258 CrossRefGoogle Scholar
  36. 36.
    Bauer R, Schlünder EU (1978) Effective radial thermal conductivity of packings in gas flow. Part II. Thermal conductivity of the packing fraction without gas flow. Int Chem Eng 18:189–204Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Dinesh Shrestha
    • 1
    Email author
  • Zarghaam Haider Rizvi
    • 1
  • Frank Wuttke
    • 1
  1. 1.Department of Geomechanics & GeotechnicsUniversity of KielKielGermany

Personalised recommendations