Springer Nature is making Coronavirus research free. View research | View latest news | Sign up for updates

Improved calculation of the slot leakage inductance of different slot shapes

  • 24 Accesses


The slot leakage inductance calculation is an important element of the electric machine’s design. The empirical definitions are described in the literature and widely used until today. The crucial parameter is the slot permeance factor which defines the influence of slot dimensions on the leakage inductance. The traditional approach to the slot leakage inductance calculation is used in this paper, but improved flux line length and active slot area calculation are presented. The main objective of the paper is the definition of relatively simple relation to the calculation of the slot permeance factor and comparison with the finite element calculation and literature-based equations. Therefore, an overview of different slot types is presented in this paper, and obtained results are in general more reliable than literature-related relations based on the finite element validation.

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13


  1. 1.

    Cavagnino A (2017) Accuracy-enhanced algorithms for the slot leakage inductance computation of double-layer windings. IEEE Trans Ind Appl 53(5):4422–4430.

  2. 2.

    Saleh K, Sumner M (2018) Sensorless speed control of five-phase PMSM drives with low current distortion. Electr Eng 100:357.

  3. 3.

    El-Refaie AM (2010) Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges. IEEE Trans Ind Electr 57(1):107–121.

  4. 4.

    Mecrow BC, Jack AG, Haylock JA, Coles J (1996) Fault-tolerant permanent magnet machine drives. IEE Proc Electr Power Appl 143(6):437–442.

  5. 5.

    Di Gerlando A, Foglia GM, Perini R et al (2007) Permanent magnet synchronous machines with concentrated coil armature windings: analysis and test validation of single stator-double rotor, axial flux machines. Electr Eng 90:65.

  6. 6.

    El-Refaie AM, Jahns TM (2005) Optimal flux weakening in surface PM machines using fractional-slot concentrated windings. IEEE Trans Ind Appl 41(3):790–800.

  7. 7.

    Misir O, Ponick B (2017) Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding. Electr Eng 99:615.

  8. 8.

    Ponomarev P, Lindh P, Pyrhönen J (2013) Effect of slot-and-pole combination on the leakage inductance and the performance of tooth-coil permanent-magnet synchronous machines. IEEE Trans Ind Electr 60(10):4310–4317.

  9. 9.

    Schreier L, Bendl J, Chomat M (2017) Effect of combined stator winding on reduction of higher spatial harmonics in induction machine. Electr Eng 99:161.

  10. 10.

    Dajaku G, Spas S, Gerling D (2019) Advanced optimization methods for fractional slot concentrated windings. Electr Eng.

  11. 11.

    Schreier L, Bendl J, Chomat M (2015) Effect of higher spatial harmonics on properties of six-phase induction machine fed by unbalanced voltages. Electr Eng 97:155.

  12. 12.

    Pyrhönen J, Jokinen T, Hrabovcova V (2014) Design of rotating electrical machines, 2nd edn. Wiley, Chichester, pp 229–264. ISBN 978-1-118-58157-5

  13. 13.

    Müller G, Vogt K, Ponick B (2007) Streuung (leakage). In: Calculations of electric machinery (Berechnung elektrischer Maschinen). Wiley-Vch, Weinhein, pp 295–343. ISBN: 978-3527405251

  14. 14.

    Boldea I, Nasar SA (2002) Leakage inductances and resistances. In: The induction machine handbook. CRC Press, Boca Raton, pp 133–158. ISBN: 0-8493-004-5

  15. 15.

    Riggert JH, Vaske P (1967). Streuung umlaufender Maschinen (leakage of rotating machines). In: Elektrische Maschninen und Umformer, Teil 2: Berechnung elektrischer Maschinen (electrical machines and convertors, part 2: calculations of electric machinery), 7th edn. Stuttgart, Germany, pp 50–58

  16. 16.

    Kopylov IP (1988). Navrh asynchronnich stroju (induction machine design). In: Stavba elektrickych stroju (design of electrical machines), 1st edn. Praha, SNTL, pp 185–340. ISBN: 04-532-88

  17. 17.

    Bortolozzi M, Branz L, Tessarolo A, Bruzzese C (2015) Improved analytical computation of rotor rectangular slot leakage inductance in squirrel-cage induction motors. In: 2015 international conference on sustainable mobility applications, renewables and technology (SMART), Kuwait City, pp 1–5.

  18. 18.

    Bortolozzi M, Branz L, Tessarolo A, Bruzzese C (2015) An improved analytical expression for computing the leakage inductance of a circular bar in a semi-closed slot. In: 2015 international conference on sustainable mobility applications, renewables and technology (SMART), Kuwait City, pp 1–5.

  19. 19.

    Tessarolo A (2015) Analytical determination of slot leakage field and inductances of electric machines with double-layer windings and semiclosed slots. IEEE Trans Energy Convers 30(4):1528–1536.

  20. 20.

    Prieto B, Martínez-Iturralde M, Fontán L, Elosegui I (2015) Analytical calculation of the slot leakage inductance in fractional-slot concentrated-winding machines. IEEE Trans Ind Electr 62(5):2742–2752.

  21. 21.

    Richter R (1967) Elektrische Maschinen (Electrical machines). Springer, Basel. ISBN: 978-3-0348-4066-8

  22. 22.

    Tovar-Barranco A, Briz F, López-de-Heredia A, Villar I (2017) Comparison of permanent magnet synchronous machines with concentrated windings and different rotor configurations. In: 2017 19th European conference on power electronics and applications (EPE’17 ECCE Europe), Warsaw, pp P.1–P.8.

Download references


This research has been supported by the Ministry of Education, Youth and Sports of the Czech Republic under the project OP VVV Electrical Engineering Technologies with High-Level of Embedded Intelligence CZ.02.1.01/0.0/0.0/18_069/0009855 and funding program of the University of West Bohemia number SGS-2018-009.

Author information

Correspondence to Jan Laksar.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Laksar, J. Improved calculation of the slot leakage inductance of different slot shapes. Electr Eng (2020).

Download citation


  • Analytical models
  • Electric machines
  • Magnetic flux leakage
  • Slots