Advertisement

Investigation of the key process parameters in the hot forming of a shackle

  • J. Cochet
  • S. Thuillier
  • N. Decultot
  • P. Y. ManachEmail author
ORIGINAL ARTICLE
  • 40 Downloads

Abstract

To investigate the impact of the variations of different input parameters in the multi-stage hot forging process of a shackle, an analysis is carried out through numerical simulations of the whole manufacturing process. Due to the complexity of the process and the large number of factors influencing the thermo-mechanical forming process, the investigation is focused on the workpiece positioning, the temperature of the tools, the transportation time and the contact-friction conditions. The analysis is narrowed down to the key stages of the process that are closed-die forging and ram bending. Coupled with experimental measurements, a comparison of forging loads, functional dimensions and shackle geometry is presented. It is shown that the conformation of shackle geometry to the industrial specifications depends mainly on the workpiece positioning and the transportation time. The dispersion measured in the forging load and in the main dimensions can thus be explained and these observations can be used to improve the manufacturing process for shackles.

Keywords

Hot forming Process parameter variation Shackle Forging Ram bending 

Notes

Funding information

The authors gratefully acknowledge the financial support of the Brittany Region (France).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Douglas R, Kuhlmann D (2000) Guidelines for precision hot forging with applications. J Mater Process Technol 98:182– 188CrossRefGoogle Scholar
  2. 2.
    Srivastava S, Srivastava K, Sharma R., Hans Raj K. (2004) Modelling of hot closed die forging of an automotive piston with ANN for intelligent manufacturing. J Sci Ind Res 63:997–1005Google Scholar
  3. 3.
    Fourment L, Chenot JL (1996) Optimal design for non-steady-state metal forming processes I. Shape optimization method. Int J Numer Meth Eng 39:33–50CrossRefGoogle Scholar
  4. 4.
    Zhao G, Huff R, Hutter A, Grandhi RV (1997) Sensitivity analysis based preform die shape design using finite element method. J Eng Perform 6:303–10CrossRefGoogle Scholar
  5. 5.
    Srikanth A, Zabaras N (2000) Shape optimization and preform design in metal forming processes. Comput Methods in Appl Mech Eng 190:1859–901CrossRefGoogle Scholar
  6. 6.
    Chung JS, Hwang SM (2002) Process optimal design in forging by genetic algorithm. J Manuf Sci Eng 124:397–408CrossRefGoogle Scholar
  7. 7.
    Antonio CAC, Dourado NM (2002) Metal-forming process optimisation by inverse evolutionary search. J Mater Process Tech 121:403–13CrossRefGoogle Scholar
  8. 8.
    Wei DL, Cui ZS, Chen J (2008) Optimization and tolerance prediction of sheet metal forming process using response surface model. Comput Mater Sci 42:228–33CrossRefGoogle Scholar
  9. 9.
    Ou H, Wang P, Lu B, Long H (2012) Finite element modelling and optimisation of net-shape metal forming processes with uncertainties. Computers and Structures 90–91:13–27CrossRefGoogle Scholar
  10. 10.
    Bulur BK, Grandhi RV (2004) Geometric deviations in forging and cooling operations due to process uncertainties. J Mater Process Tech 152:204–14CrossRefGoogle Scholar
  11. 11.
    Repalle J, Grandhi RV (2005) Reliability-based preform shape design in forging. Commun Numer Methods Eng 21:607–17CrossRefGoogle Scholar
  12. 12.
    Krusic V, Arentoft M, Masera S, Pristovsek A, Rodic T (2011) A combined approach to determine workpiece-tool-press deflections and tool loads in multistage cold-forging. J Mater Process Technol 211:35–42CrossRefGoogle Scholar
  13. 13.
    Kroiss T, Engel U, Merklein M (2013) Comprehensive approach for process modeling and optimization in cold forging considering interactions between process, tool and press. J Mater Process Technol 213:1118–1127CrossRefGoogle Scholar
  14. 14.
    Saniee FF, Hosseini AH (2006) The effects of flash allowance and bar size on forming load and metal flow in closed die forging. J Mater Process Technol 177:261–265CrossRefGoogle Scholar
  15. 15.
    Equbal MI, Kumar R, Shamim M, Ohdard RK (2014) A grey-based Taguchi method to optimize hot forging process. Procedia Materials Science 6:1495–1504CrossRefGoogle Scholar
  16. 16.
    Allam Z, Becker E, Baudouin C, Bigot R, Krumpipe P (2014) Forging process control: influence of key parameters variation on product specifications deviations. Procedia Eng 81:2524–2529CrossRefGoogle Scholar
  17. 17.
    Gangopadhyay T, Ohdar RK, Pratihar DK, Basak I (2011) Three-dimensional finite element analysis of multi-stage hot forming of railway wheels. Int J Adv Manuf Technol 53:301–312CrossRefGoogle Scholar
  18. 18.
    Rathi MG, Jakhade NA (2014) An overview of forging processes with their defects. International Journal of Scientific and Research Publications 4:6Google Scholar
  19. 19.
    Petrov P, Perfilov V, Stebunov S (2006) Prevention of lap formation in near net shape isothermal forging technology of part of irregular shape made of aluminium alloy a92618. J Mater Process Technol 177(1):218–223CrossRefGoogle Scholar
  20. 20.
    Jenkins BL, Oh SI, Altan T (1989) Investigation of defect formation in a 3-Station closed die forging operation. CIRP Annals - Manuf Tech 38(1):243–247CrossRefGoogle Scholar
  21. 21.
    Barrau O, Boher C, Gras R, Rezai-Aria F (2003) Analysis of the friction and wear behaviour of hot work tool steel for forging. Wear 255(7-12):1444–1454CrossRefGoogle Scholar
  22. 22.
    Rodrigues J, Martins P (2002) Finite element modelling of the initial stages of a hot forging cycle. Finite Elem Anal Des 38(3):295–305CrossRefGoogle Scholar
  23. 23.
    Cochet J, Thuillier S, Manach PY, Decultot N (2016) Thermo-mechanical forming of a large sling shackle. Int J Adv Manuf Tech 86(5-8):1573–1591CrossRefGoogle Scholar
  24. 24.
    Online catalogue Le Béon Manufacturing: www.lebeon-manufacturing.com/en/home
  25. 25.
    Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics 21:541–547Google Scholar
  26. 26.
    Cochet J, Thuillier S, Loulou T, Decultot N, Carré P., Manach PY (2017) Heat treatment of 34CrNiMo6 steel used for mooring shackles. Int J Adv Manuf Tech 91(5-8):2329–2346CrossRefGoogle Scholar
  27. 27.
    Geuzaine C, Remacle JF (2009) Gmsh: A 3-D finite element mesh generator with built-in pre-and post-processing facilities. Int J Numer Meth Eng 79(11):1309–1331MathSciNetCrossRefGoogle Scholar
  28. 28.
    Joun MS, Moon HG, Choi IS, Lee MC, Jun BY (2009) Effects of friction laws on metal forming processes. Tribol Int 42:311–319CrossRefGoogle Scholar
  29. 29.
    Balasundar I, Raghu T (2010) Effect of friction model in numerical analysis of equal channel angular pressing process. Materials & Design 31:449–457CrossRefGoogle Scholar
  30. 30.
    Zhang DW, Yang H, Li HW, Fan XG (2011) Friction factor evaluation by FEM and experiment for TA15 titanium alloy in isothermal forming process. Int J Adv Manuf Tech 60(5):527–536Google Scholar
  31. 31.
    Ou H, Balendra R (1998) Die-elasticity for precision forging of aerofoil sections using finite element simulation. J Mater Process Technol 76(1):56–61CrossRefGoogle Scholar
  32. 32.
    Schmid SR, Liu J, Selles MA, Pasang T (2013) Advanced interface models for metal forming simulations. Comput Mater Sci 79:763–771CrossRefGoogle Scholar
  33. 33.
    Fereshteh-Saniee F, Pillinger I, Hartley P (2004) Friction modelling for the physical simulation of the bulk metal forming processes. J Mater Process Technol 153(154):151–156CrossRefGoogle Scholar
  34. 34.
    Schey JA (1984) Tribology in metalworking: friction, lubrication, and wear. J Appl Metalwork 3(2):173–173CrossRefGoogle Scholar
  35. 35.
    Bay N (1987) Friction stress and normal stress in bulk metal-forming processes. J Mech Work Technol 14(2):203–223CrossRefGoogle Scholar
  36. 36.
    Altan T, Oh SI, Gegel G (1983) Metal forming fundamentals and applications. American Society for Metals 1983:353Google Scholar
  37. 37.
    Burte PR, Im YT, Altan T, Semiatin SL (1990) Measurement and analysis of heat transfer and friction during hot forging. J Manuf Sci Eng 112(4):332–339Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • J. Cochet
    • 1
  • S. Thuillier
    • 1
  • N. Decultot
    • 2
  • P. Y. Manach
    • 1
    Email author
  1. 1.Université Bretagne Sud, UMR CNRS 6027, IRDLLorientFrance
  2. 2.Le Béon ManufacturingLorientFrance

Personalised recommendations