Advertisement

An online tool wear detection system in dry milling based on machine vision

  • Qiulin Hou
  • Jie SunEmail author
  • Zhenyu Lv
  • Panling Huang
  • Ge Song
  • Chao Sun
ORIGINAL ARTICLE
  • 49 Downloads

Abstract

Tool wear is accelerated with the friction in the tool–workpiece contact during dry cutting. Tool changing early or late will affect the quality of tool and workpiece. An online and machine system vision-based is built to monitor tool condition in real time. MATLAB is used to compile the self-matching algorithm, which considers the features of interested targets on the flank face. Furthermore, a corresponding GUI is designed and encapsulated for both the bottom and flank edges. It is shown that the absolute value of the error on the maximum wear width is not more than 0.007 mm for the bottom edge. For the flank edge, the absolute value of the error is not more than 0.030 mm owing to the local highlighting interference. It is proved that the system can guarantee the quality of tool and workpiece and avoid unnecessary waste significantly. This platform can enhance the utilization of the tool in dry cutting.

Keywords

Online detection Tool wear Dry milling Machine vision Self-matching algorithm 

Notes

Acknowledgments

The authors want to extend sincere thanks to all the previous researches that contributed to this paper.

Funding information

This study is supported by the AVIC Cheng Du Aircraft Industrial (Group) Co. Ltd. (grant no. 2014-063), Key R & D project of Shandong Province (grant no. 2017GGX30141), and difital workshop of aeronautic large-scale complex structural (intelligent manufacturing special support by Ministry of Industry and Information Technology in 2015) (grant no. 40205000150X).

References

  1. 1.
    Huang PL, Li JF, Sun J, Zhou J (2014) Study on performance in dry milling aeronautical titanium alloy thin-wall components with two types of tools. J Clean Prod 67:258–264CrossRefGoogle Scholar
  2. 2.
    Lawal SA, Choudhury IA, Nukman Y (2013) A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant. J Clean Prod 41:210–221CrossRefGoogle Scholar
  3. 3.
    Zhang S, Li JF, Wang YW (2012) Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. J Clean Prod 32:81–87CrossRefGoogle Scholar
  4. 4.
    Li KM, Liang SY (2007) Modeling of cutting forces in near dry machining under tool wear effect. Int J Mach Tools Manuf 47:1292–1301CrossRefGoogle Scholar
  5. 5.
    Sun X G, Sun L, Wang E H (2014) Study on joint surface parameter identification method of shaft-toolholder and toolholder-tool for vertical CNC milling machine. Mach Tool & Hydr 42(23):106-109.Google Scholar
  6. 6.
    Wang B, Sun W, Wen BC (2012) The finite element modeling of high-speed spindle system dynamics with spindle-holder-tool joints. Aust J Mech Eng (15):83–89CrossRefGoogle Scholar
  7. 7.
    Ghani JA, Rizal M, Nuawi MZ, Ghazali MJ, Haron CHC (2011) Monitoring online cutting tool wear using low-cost technique and user-friendly GUI. Wear 271(9–10):2619–2624CrossRefGoogle Scholar
  8. 8.
    Gómez MP, Hey AM, Ruzzante JE, Attellis CED (2010) Tool wear evaluation in drilling by acoustic emission. Phys Procedia 3(1):819–825CrossRefGoogle Scholar
  9. 9.
    Chen XQ, Li HZ (2009) Development of a tool wear observer model for online tool condition monitoring and control in machining nickel-based alloys. Int J Adv Manuf Technol 45(7-8):786–800CrossRefGoogle Scholar
  10. 10.
    Maia LHA, Abrao AM, Vasconcelos WL, Sales WF, Machado AR (2015) A new approach for detection of wear mechanisms and determination of tool life in turning using acoustic emission. Tribol Int 92:519–532CrossRefGoogle Scholar
  11. 11.
    Malekian M, Park SS, Jun MBG (2009) Tool wear monitoring of micro-milling operations. J Mater Process Technol 209(10):4903–4914CrossRefGoogle Scholar
  12. 12.
    Wang G, Guo Z, Yang Y (2013) Force sensor based online tool wear monitoring using distributed Gaussian ARTMAP network. Sens Actuators A Phys 192(7):111–118CrossRefGoogle Scholar
  13. 13.
    Shi XC, Wang XB, Jiao L, Wang Z, Yan P, Gao SF (2018) A real-time tool failure monitoring system based on cutting force analysis. Int J Adv Manuf Technol 95(5-8):2567–2583CrossRefGoogle Scholar
  14. 14.
    Kim JH, Moon DK, Lee DW, Kim JS, Kang MC, Kim KH (2002) Tool wear measuring technique on the machine using CCD and exclusive jig. J Mater Process Technol 130-131(02):668–674CrossRefGoogle Scholar
  15. 15.
    Loizou J, Tian W, Robertson J, Camelio J (2015) Automated wear characterization for broaching tools based on machine vision systems. J Manuf Syst 37:558–563CrossRefGoogle Scholar
  16. 16.
    Zhang JL, Zhang C, Guo S, Zhou LS (2012) Research on tool wear detection based on machine vision in end milling process. Prod Eng 6(4-5):431–437CrossRefGoogle Scholar
  17. 17.
    Zhang C, Zhang JL (2013) On-line tool wear measurement for ball-end milling cutter based on machine vision. Comput Ind 64(6):708–719CrossRefGoogle Scholar
  18. 18.
    Xin Y C (2016) The parameters of tool wear detection technology research. Dissertation, Xi’an Technological UniversityGoogle Scholar
  19. 19.
    Bradley C, Wong YS (2001) Surface texture indicators of tool wear - a machine vision approach. Int J Adv Manuf Technol 17(6):435–443CrossRefGoogle Scholar
  20. 20.
    Datta A, Dutta S, Pal SK, Sen R, Mukhopadhyay S (2012) Texture analysis of turned surfaces using grey level co-occurrence technique. Adv Mater Res 365:38–43CrossRefGoogle Scholar
  21. 21.
    Mannan MA, Zhu M, Kassim AA (2004) Tool wear monitoring using a fast Hough transform of images of machined surfaces. Mach Vis Appl 15(3):156–163CrossRefGoogle Scholar
  22. 22.
    Sun LL, Li Y, Zheng JM, Li PY (2010) Fractal analysis of PCA reconstruction for tool wear monitoring. Mech Sci Tech Aero Eng 29(3):395–397Google Scholar
  23. 23.
    Zhang G, To S, Xiao G (2014) Novel tool wear monitoring method in ultra-precision raster milling using cutting chips. Precis Eng 38(3):555–560CrossRefGoogle Scholar
  24. 24.
    Wang C C (2014) On-site tool wear detection based on high precision computer vision. Dissertation, Donghua UniversityGoogle Scholar
  25. 25.
    Hou QL, Sun J, Huang PL (2018) A novel algorithm for tool wear online inspection based on machine vision. Int J Adv Manuf Technol 101(9):2415–2423Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • Qiulin Hou
    • 1
    • 2
  • Jie Sun
    • 1
    • 2
    Email author
  • Zhenyu Lv
    • 3
  • Panling Huang
    • 1
    • 2
  • Ge Song
    • 4
  • Chao Sun
    • 4
  1. 1.School of Mechanical EngineeringShandong UniversityJinanChina
  2. 2.Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of EducationShandong UniversityJinanChina
  3. 3.Tianjin Institute of Navigation InstrumentTianjinChina
  4. 4.AVIC Cheng Du Aircraft Industrial (Group) Co., Ltd.ChengduChina

Personalised recommendations