Investigation on the angular accuracy of selective laser melting
- 16 Downloads
In this paper, theoretical models for prediction angular accuracy of selective laser melting with three depositing directions were proposed by considering the track width and the solidification shrinkage. The prediction of the angular absolute error of the angular structure was performed using these models. The results show that the angular fabricated by the SLM process is equal to the as-designed angular for the investigated three directions. Then, the experiments of SLMed Ti6Al4V angular structures were carried out to verify the theoretical models. The theoretical prediction and experimental results had good correspondence. The absolute error of angular concentrates on the scope of ± 0.75°. This fluctuation is caused by the bad surface quality which is resulted by the stair effect. Furthermore, the bad surface roughness enlarges the dimensional measurements of the angular structure. These results provide a guideline for improving the accuracy of SLM technology.
KeywordsTheoretical model Selective laser melting Angular structure Accuracy
This work is supported by the National Program on Key Basic Research Project of China (973 Program) under Grant No.613281.
- 11.Ghani SAC, Zakaria MH, Harun WSW, Zaulkafilai Z (2017) Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) And direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools. MATEC Web of Conferences. EDP Science 90:01058Google Scholar
- 12.Fotovvati, B., Wayne, S. F., Lewis, G., Asadi, E (2018) A review on melt-pool characteristics in laser welding of metals. Adv Mater Sci Eng 2018(11):1–18Google Scholar