Advertisement

Effect of jet electrodeposition conditions on microstructure and mechanical properties of Cu–Al2O3 composite coatings

  • Hui FanEmail author
  • Yangpei Zhao
  • Shankui Wang
  • Huafeng Guo
ORIGINAL ARTICLE

Abstract

Jet electrodeposition is an advanced manufacturing technology that can produce metallic nano-scaled microstructures with unique performance. Cu–Al2O3 composite coatings were prepared by jet electrodeposition from a plating bath with nano-Al2O3 particles suspended into the bath. Detailed microstructure changes upon the changes of experimental conditions were characterized using X-ray diffraction (XRD) and scanning electron microscope (SEM). The effect of the deposition conditions on the composite coating mechanical properties was investigated. Experimental results indicated that the Al2O3 particle adding into the electrolyte was able to refine the composite coating grains and enhance the deposit inner-structure as well as compactness, which considerably strengthens the composite coating’s mechanical property. It is proved that the current density in the range of 100~500 A/dm2 could offer grain refining effect and the addition of Al2O3 nanoparticles can effectively promote the composite coating mechanical properties.

Keywords

Jet electrodeposition Composite coating Experimental conditions Microstructure  Mechanical property 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This research was supported by The National Natural Science Foundation of China (51305178), Natural Science Foundation of Jiangsu provincial University (17KJD460005 and 17KJB460015), Jiangsu Natural Science Foundation (BK20181473), Foundation of Jiangsu Key Laboratory of Large Engineering Equipment Detection and Control (JSKLEDC201411), and Nantong 3D printing laboratory funding project (2018KFKT09/CP12016002).

References

  1. 1.
    Pouraliakbar H, Nazari A, Fataei P, Livary AK, Jandaghi M (2013) Predicting Charpy impact energy of Al6061/SiCp laminated nanocomposites in crack divider and crack arrester forms. Ceram Int 39(6):6099–6106CrossRefGoogle Scholar
  2. 2.
    Heidarzadeh A, Pouraliakbar H, Mahdavi S, Jandaghi MR (2018) Ceramic nanoparticles addition in pure copper plate: FSP approach, microstructure evolution and texture study using EBSD. Ceram Int 44(3):3128–3133CrossRefGoogle Scholar
  3. 3.
    Monazzah AH, Pouraliakbar H, Bagheri R, Seyed Reihani SM (2017) Al-Mg-Si/SiC laminated composites: fabrication, architectural characteristics, toughness, damage tolerance, fracture mechanisms. Compos Part B-Eng 125:49–70CrossRefGoogle Scholar
  4. 4.
    Monazzah H, Pouraliakbar H, Bagheri R, Seyed Reihani SM (2014) Toughness behavior in roll-bonded laminates based on AA6061/SiCp composites. Mat Sci Eng A-Struct: A 598:162–173CrossRefGoogle Scholar
  5. 5.
    Xue YJ, Zhu D, Zhao F (2004) Electrodeposition and mechanical properties of Ni–La2O3 nanocomposites. J Mater Sci 39:4063–4066CrossRefGoogle Scholar
  6. 6.
    Sriraman KR, Ganesh SRS, Seshadri SK (2007) Corrosion behaviour of electrodeposited nanocrystalline Ni-W and Ni-Fe-W alloys. Mater Sci Eng. A 460-46:39–45Google Scholar
  7. 7.
    Zheng XH, Tan J, Zhang Q, Wang M, Meng L (2017) Effect of laser surface texturing depth on the adhesion of electroless plated nickel coating on alumina. Surf Coat Technol 311:151–156CrossRefGoogle Scholar
  8. 8.
    Liu DR, Zhang Q, Qin ZB, Luo Q, Wu Z, Liu L (2016) Tribological performance of surfaces enhanced by texturing and nitrogen implantation. Appl Surf Sci 363:161–167CrossRefGoogle Scholar
  9. 9.
    Zhang KY, Liu JG, Xiao W, Yan C (2017) Electrodeposition of graded Ni-S film for hydrogen evolution reaction. Mater Lett 193:77–80CrossRefGoogle Scholar
  10. 10.
    Qiao GY, Jing TF, Wang N, Gao Y, Zhao X, Zhou J, Wang W (2005) High-speed jet electrodeposition and microstructure of nanocrystalline Ni–Co alloys. Electrochim Acta 51:85–92CrossRefGoogle Scholar
  11. 11.
    Tan J, Song H, Zheng XH, Zhang Q, Wang M (2018) High performance Co-Cr3C2 composite coating by jet electrodeposition. Surf Eng 34:861–869CrossRefGoogle Scholar
  12. 12.
    Kima H, Kimb JG, Parkc JW et al (2018) Selective copper metallization of nonconductive materials using jet circulating electrodeposition. Precis Eng 51:153–159CrossRefGoogle Scholar
  13. 13.
    Xia FF, Jia WC, Ma CY, Yang R, Wang Y, Potts M (2018) Synthesis and characterization of Ni-doped TiN thin films deposited by jet electrodeposition. Appl Surf Sci 434:228–233CrossRefGoogle Scholar
  14. 14.
    Rajput MS, Pandey P, Jha MS et al (2015) Modelling of high speed selective jet electrodeposition process. J Manuf Process 17:98–107CrossRefGoogle Scholar
  15. 15.
    Mridul S. Rajput. Pulak M. PandeySunil Jha.(2015) Micromanufacturing by selective jet electrodeposition process. Int J Adv Manuf Technol 76: 61–67Google Scholar
  16. 16.
    Fan H, Huang YH (2013) Improved microstructure and corrosion resistance of nanostructured nickel coating. Corros Eng Sci Techn 48:48–50CrossRefGoogle Scholar
  17. 17.
    Pouraliakbar Hesam JMR, Mohammadi Baygi SJ, Khalaj G (2017) Microanalysis of crystallographic characteristics and structural transformations in SPDed Al Mn Si alloy by dual-straining. J Alloy Compd 696:1189–1198CrossRefGoogle Scholar
  18. 18.
    Jandaghi MR, Pouraliakbar H, Khalaj G, Khalaj MJ, Heidarzadeh A (2016) Study on the post-rolling direction of severely plastic deformed aluminum-manganese-silicon alloy. Arch Civ Mech Eng 16(4):876–887CrossRefGoogle Scholar
  19. 19.
    Pouraliakbar H, Jandaghi MR, Khalaj G (2017) Constrained groove pressing and subsequent annealing of Al-Mn-Si alloy: microstructure evolutions, crystallographic transformations, mechanical properties, electrical conductivity and corrosion resistance. Mater Design 124:34–46CrossRefGoogle Scholar
  20. 20.
    Liu L, Wang LB Ding BZ, etal. (2000) High-tensible ductility in nanocrystalline copper. M R S 15(2): 270–273Google Scholar
  21. 21.
    Zhang YW, Liu P, Lu C (2004) Molecular dynamics simulation of the preparation and deformation of nanocrystalline copper. Acta Mater 52:5105–5114CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • Hui Fan
    • 1
    Email author
  • Yangpei Zhao
    • 2
  • Shankui Wang
    • 1
    • 2
  • Huafeng Guo
    • 3
  1. 1.Kewen College, School of Mechanical and Electrical EngineeringJiangsu Normal UniversityXuzhouChina
  2. 2.Science and Technology DepartmentJiang su Jiangzhu InstituteXuzhouChina
  3. 3.Jiangsu Key Laboratory of Large Engineering Equipment Detection and ControlXuzhouChina

Personalised recommendations