Advertisement

Millisecond fibre laser trepanning drilling of angular holes

  • S. MarimuthuEmail author
  • M. Antar
  • J. Dunleavey
  • P. Hayward
ORIGINAL ARTICLE
  • 4 Downloads

Abstract

This paper aims to investigate the basic characteristics of millisecond (ms) pulsed fibre laser drilling of 0.8 mm diameter angular holes (30° to the surface) in a 2 mm thick aerospace nickel superalloy (resultant hole length of 4 mm). Experiments have been conducted to understand the influence of various process parameters on the hole quality, including gas pressure, nozzle-workpiece distance, laser beam focus position, trepanning speed, number of trepanning orbits, pulse energy, pulse duration and pulse frequency. The results suggest that high quality and high productivity can be achieved with millisecond fibre laser drilling, especially when compared to traditional Nd:YAG laser drilling. A new trepanning drilling method for achieving high-quality laser drilling was proposed and evaluated.

Keywords

Drilling Laser Angular hole Fibre Trepanning Millisecond 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

The authors acknowledge the financial support from Innovate-UK under the Flexlase project.

References

  1. 1.
    Pollock TM, Tin S (2006) Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. J Propuls Power 22(2):361–374CrossRefGoogle Scholar
  2. 2.
    Langston L (2017) Performance and endurance enhancement by means of turbine cooling. Mech Eng Mag Select Articles 139(12):46–47Google Scholar
  3. 3.
    Marimuthu S, Antar M, Dunleavey J, Chantzis D, Darlington W, Hayward P (2017) An experimental study on quasi-CW fibre laser drilling of nickel superalloy. Opt Laser Technol 94:119–127CrossRefGoogle Scholar
  4. 4.
    Yeo CY, Tam SC, Jana S, Lau MWS (1994) A technical review of the laser drilling of aerospace materials. J Mater Process Technol 42(1):15–49CrossRefGoogle Scholar
  5. 5.
    Morar N et al (2017) The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850°C. Int J Fatigue 102:112–120CrossRefGoogle Scholar
  6. 6.
    Morar NI, Roy R, Mehnen J, Marimuthu S, Gray S, Roberts T, Nicholls J (2018) Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes. Int J Adv Manuf Technol 95(9–12):4059–4070CrossRefGoogle Scholar
  7. 7.
    Low D, Li L, Corfe A, Byrd P (2001) Spatter-free laser percussion drilling of closely spaced array holes. Int J Mach Tools Manuf 41(3):361–377CrossRefGoogle Scholar
  8. 8.
    Wang H, Ren N, Zhang W, Xia K and Zhang L, (2017) “Influence of assist gases on pulsed laser drilling of nickel-based superalloy,” in Conference on Lasers and Electro-Optics Pacific RimGoogle Scholar
  9. 9.
    Goyal R, Dubey AK (2014) Quality improvement by parameter optimization in laser trepan drilling of superalloy sheet. Mater Manuf Process 29(11–12):1410–1416CrossRefGoogle Scholar
  10. 10.
    Dhaker KL, Pandey AK, Upadhayay BN (2017) Experimental investigation of hole diameter in laser trepan drilling of Inconel718 sheet. Mater Today: Proceedings 4(8):7599–7608CrossRefGoogle Scholar
  11. 11.
    Okasha MM, Mativenga PT, Li L (2011) Sequential laser mechanical micro-drilling of Inconel 718 alloy. J Manuf Sci Eng – Trans ASME 133(1):011008–1-7CrossRefGoogle Scholar
  12. 12.
    Schneider M, Berthe L, Fabbro R, Muller M, Nivard M (2007) Gas investigation for laser drilling. J Laser Appl 19(3):165–9Google Scholar
  13. 13.
    Schneider M, Girardot J, Berthe L (2011) Recoil pressure and surface temperature in laser drilling. In 30th International Congress on Applications of Lasers & Electro-Optics 1:478–481Google Scholar
  14. 14.
    Jacobs P (2008) Precision trepanning with a fiber laser. In 27th International Congress on Applications of Lasers & Electro-Optics. Temecula. 1:1–18Google Scholar
  15. 15.
    Marimuthu S, Antar M, Dunleavey J (2019) Characteristics of micro-hole formation during fibre laser drilling of aerospace superalloy. Precis Eng 55:339–48Google Scholar
  16. 16.
    Powell J (1993) CO2 laser cutting, vol 214. Springer-Verlag, London, UKCrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • S. Marimuthu
    • 1
    Email author
  • M. Antar
    • 1
  • J. Dunleavey
    • 1
  • P. Hayward
    • 1
  1. 1.The Manufacturing Technology CentreCoventryUK

Personalised recommendations