Advertisement

Study on the alternative burning behavior of arcs in hybrid laser–double-arc welding

  • Xiaoyan GuEmail author
  • Yong Di
  • Jinshan Luo
ORIGINAL ARTICLE
  • 5 Downloads

Abstract

Hybrid laser–double-arc welding (HLDAW) is a perspective welding technology with high-deposition quantity, deep penetration, superior gap-bridging ability, and is simply equipped and flexibly adjusted. Either double-power supply system or single-power supply system can be used in this welding system. In the single-power supply mode, there is a particular phenomenon called “alternative burning” presented under certain welding conditions. The frequency of alternative burning is the key to the welding stability. However, the mechanism of this phenomenon and its change rules are not clear. This research mainly aims at the change laws of alternative burning and its essential mechanism. It was found that the alternating period is inversely proportional to laser power and wire-feeding speed, and is proportional to wire spacing and arc voltage. The essence of alternative burning is the regularly repetitive transfer of arc from one wire tip to the other in the condition of relatively low electron density in arc zone which is hard to maintain two arcs burning simultaneously. This phenomenon will disappear when the electron density is greater than 5.54 × 1016 cm−1. Results are meaningful for understanding the interaction mechanism of heat source and its influence on welding stability of HLDAW process in this kind of power supply.

Keywords

Laser Hybrid laser–double-arc welding Alternative burning Electron density Welding stability 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This research work was funded by National Natural Science Foundation of China (Grant No. 51705218).

References

  1. 1.
    Dilthey U, Keller H (2001) Prospects in laser GMA hybrid welding of steel. Proceedings of the first international WLT-conference on lasers in manufacturing Munich June, pp 453–465Google Scholar
  2. 2.
    Olsen FO (2009) Hybrid laser–arc welding. Cambridge, U.KGoogle Scholar
  3. 3.
    Gu XY, Li H, Yang LJ, Gao Y (2013) Coupling mechanism of laser and arcs of laser-twin-arc hybrid welding and its effect on welding process. Opt Laser Technol 48:246–253CrossRefGoogle Scholar
  4. 4.
    Hu LH, Huang J, Liu CT, Liu XL (2018) Effects of coupling between the laser plasma and two arcs on metal transfer in CO2 laser double-wire MIG hybrid welding. Opt Laser Technol 105:152–161CrossRefGoogle Scholar
  5. 5.
    Gu XY, Li H, Jiang XB, Sheng HC (2017) Effect of laser on droplet transfer and welding process stability in hybrid laser + double arc welding. Int J Adv Manuf Technol 89:2981–2991CrossRefGoogle Scholar
  6. 6.
    Moinuddin SQ, Sharma A (2015) Arc stability and its impact on weld properties and microstructure in anti-phase synchronised synergic-pulsed twin-wire gas metal arc welding. Mater Des 67:293–302CrossRefGoogle Scholar
  7. 7.
    Bunaziv I, Frostevarg J, Akselsen OM (2018) Process stability during fiber laser-arc hybrid welding of thick steel plates. Opt Lasers Eng 102:34–44CrossRefGoogle Scholar
  8. 8.
    Gao XD, Wang Y, Chen ZQ, Ma B (2018) Analysis of welding process stability and weld quality by droplet transfer and explosion in MAG-laser hybrid welding process. J Manuf Process 32:522–529CrossRefGoogle Scholar
  9. 9.
    Greim HR (1964) Plasma spectroscopy. McGraw-Hill, USGoogle Scholar
  10. 10.
    Chen FF (1974) Introduction to plasma physics. Springer, USGoogle Scholar
  11. 11.
    NIST Atomic Spectra Database [DB/OL]. http://physics.nist.gov/PhysRefData/ASD/lines_form.html
  12. 12.
    Hoyaux MF (1968) Diagnostic techniques widely used in Arc Physics. Arc Physics:229–266Google Scholar
  13. 13.
    Di Y, Li H, Yang LJ, Gu XY, GAO Y (2013) Alternate arcing behavior of double-wire pulse MIG welding process with single power. Trans China Weld Inst 34(7):63–67Google Scholar
  14. 14.
    Wei HL, Li H, Yang LJ, Gao Y (2015) Arc characteristics and metal transfer process of hybrid laser double GMA welding. Int J Adv Manuf Technol 77:1019–1028CrossRefGoogle Scholar
  15. 15.
    Li RF, Li ZG, Zhu YY, Rong L (2011) A comparative study of laser beam welding and laser MIG hybrid welding of Ti-Al-Zr-Fe titanium alloy. Mater Sci Eng 528:1138–1142CrossRefGoogle Scholar
  16. 16.
    Xu GX, Li PF, Qingnan CQN, Hu QX, Gu XY, Du BS (2018) Modelling of fluid flow phenomenon in laser+GMAW hybrid welding of aluminum alloy considering three phase coupling and arc plasma shear stress. Opt Laser Technol 100:244–255CrossRefGoogle Scholar
  17. 17.
    Chen J, Zong R, Wu C, Padhy GK, Hu Q (2017) Influence of low current auxiliary TIG arc on high speed TIG-MIG hybrid welding. J Mater Process Technol 243:131–142CrossRefGoogle Scholar
  18. 18.
    Yan K, Su JS, Zhao Y (2017) Microstructure and mechanical properties of the laser-welded Mg-3Nd-0.2Zn-0.4Zr (NZ30K) magnesium alloy. Opt Laser Technol 93:109–117CrossRefGoogle Scholar
  19. 19.
    Hu B, Ouden G (2005) Laser induced stabilization of the welding arc. Sci Technol Weld Join 10:76–81CrossRefGoogle Scholar
  20. 20.
    Shinn BW, Farson DF, Denney PE (2005) Laser stabilization of arc cathode spots in titanium welding. Sci Technol Weld Join 10:475–481CrossRefGoogle Scholar
  21. 21.
    Chen MH, Li XY, Liu LM (2012) Effect of electric field on interaction between laser and arc plasma in laser–arc hybrid welding. IEEE T Plasma Sci 40:2045–2050CrossRefGoogle Scholar
  22. 22.
    Kiran DV, Cho DW, Song WH, Na SJ (2015) Arc interaction and molten pool behavior in the three wire submerged arc welding process. Int J Heat Mass Transf 87:327–340CrossRefGoogle Scholar
  23. 23.
    Ueyama T, Ohnawa T, Tanaka M, Nakata K (2007) Occurrence of arc interaction in tandem pulsed gas metal arc welding. Sci Technol Weld Join 12(6):523–529CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Jiangsu University of Science and TechnologyZhenjiangChina
  2. 2.Tianjin UniversityTianjinChina
  3. 3.Chongqing Changan Industrial Group Co., LTDChongqingChina

Personalised recommendations