Advertisement

μED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes

  • K. V. Arun Pillai
  • P. Hariharan
  • J. M. JaffersonEmail author
ORIGINAL ARTICLE
  • 2 Downloads

Abstract

Micro-electric discharge milling (μED milling) has the potential to create micro-channels in metals. Since μED milling is a slow machining process, the requirement of strategies that can enhance the material removal rate (MRR) is always crucial in the field of micro-machining. Nano-powder-mixed micro-electric discharge milling (NPMμED milling) is least explored by researchers. Also, the behaviour of μED milling at various discharge energy regime (D.E.R) was not analysed extensively. The present study investigates the combined effects of nano-powder-mixed dielectric at three different regimes of discharge energies with respect to MRR and tool wear rate (TWR) while micro-machining of Ti-6Al-4V using cryogenically treated electrodes. There is significant difference in the machining behaviour at low, medium and high D.E.Rs. Also, the effects of transformation in cathodic streamers due to addition of nano-graphene powders in the dielectric fluid were extensively analysed. Cryogenic treatment of the tool electrodes gave better MRR. The addition of nano-powders in the dielectric has reduced the crater diameter significantly however increased the overall 3D roughness of the machined surface.

Keywords

NPMμED milling Graphene Streamers Tool wear rate Material removal rate Discharge energy 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

References

  1. 1.
    Dhar P, Katiyar A, Maganti LS, Pattamatta A, Das SK (2016) Superior dielectric breakdown strength of graphene and carbon nanotube infused nano-oils. IEEE Trans Dielectr Electr Insul 23:943–956.  https://doi.org/10.1109/TDEI.2015.005477 CrossRefGoogle Scholar
  2. 2.
    Jafferson JM, Hariharan P (2013) Machining performance of cryogenically treated electrodes in microelectric discharge machining: a comparative experimental study. Mater Manuf Process 28:397–402.  https://doi.org/10.1080/10426914.2013.763955 CrossRefGoogle Scholar
  3. 3.
    Jafferson JM, Hariharan P, Ram Kumar J (2014) Effects of ultrasonic vibration and magnetic field in micro-EDM milling of nonmagnetic material. Mater Manuf Process 29(3):357–363.  https://doi.org/10.1080/10426914.2013.872268 CrossRefGoogle Scholar
  4. 4.
    Jahan MP, Rahman M (2011) Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co. Int J Adv Manuf Techol 53:167–180.  https://doi.org/10.1007/s00170-010-2826-9 CrossRefGoogle Scholar
  5. 5.
    Kibria G, Sarkar BR, Pradhan BB, Bhattacharyya B (2010) Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 48(5-8):57–570Google Scholar
  6. 6.
    Kumar R, Singh I (2018) Productivity improvement of micro EDM process by improvised tool. Precis Eng 51:529–535.  https://doi.org/10.1016/j.precisioneng.2017.10.008 CrossRefGoogle Scholar
  7. 7.
    Kuriachen B, Mathew J (2016) Effect of powder mixed dielectric on material removal and surface modification in microelectric discharge machining of Ti-6Al-4V. Mater Manuf Process 31:439–446.  https://doi.org/10.1080/10426914.2015.1004705 CrossRefGoogle Scholar
  8. 8.
    Lv Y, Ge Y, Li C, Wang Q, Zhou Y, Qi B, Yi K, Chen X, Yuan J (2016) Effect of TiO<inf>2</inf> nanoparticles on streamer propagation in transformer oil under lightning impulse voltage. IEEE Trans Dielectr Electr Insul 23:2110–2115.  https://doi.org/10.1109/TDEI.2016.7556485 CrossRefGoogle Scholar
  9. 9.
    Marashi H, Jafarlou DM, Sarhan AAD, Hamdi M (2016) State of the art in powder mixed dielectric for EDM applications. Precis Eng 46:11–33.  https://doi.org/10.1016/j.precisioneng.2016.05.010 CrossRefGoogle Scholar
  10. 10.
    Meena VK, Azad MS, Singh S, Singh N (2017) Micro-EDM multiple parameter optimization for Cp Titanium. Int J Adv Manuf Technol 89:897–904.  https://doi.org/10.1007/s00170-016-9130-2 CrossRefGoogle Scholar
  11. 11.
    Talla G, Gangopadhayay S, Biswas CK (2017) State of the art in powder-mixed electric discharge machining: a review. Proc Inst Mech Eng B J Eng Manuf 231(14):2511–2526.  https://doi.org/10.1177/0954405416634265 CrossRefGoogle Scholar
  12. 12.
    Wang Q, Rafiq M, Lv Y, Li C, Yi K (2016) Preparation of three types of transformer oil-based nanofluids and comparative study on the effect of nanoparticle concentrations on insulating property of transformer oil. J Nanotechnol 2016:1–6.  https://doi.org/10.1155/2016/5802753 Google Scholar
  13. 13.
    Yuzhen LV, Yang G, Wang L, Sun Z, Zhou Y, Huang M, Li C, Yuan J, Ki B (2018) Effects of nanoparticle materials on prebreakdown and breakdown properties of transformer oil. Appl Sci 8(4):601.  https://doi.org/10.3390/app8040601 CrossRefGoogle Scholar
  14. 14.
    Zou R, Yu Z, Yan C, Li J, Liu X, Xu W (2018) Micro electrical discharge machining in nitrogen plasma jet. Precis Eng 51:198–207.  https://doi.org/10.1016/j.precisioneng.2017.08.011 CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  • K. V. Arun Pillai
    • 1
  • P. Hariharan
    • 1
  • J. M. Jafferson
    • 2
    Email author
  1. 1.Department of Manufacturing Engineering, College of Engineering GuindyAnna University ChennaiChennaiIndia
  2. 2.Materials and Manufacturing Division, SMBSVIT University Chennai CampusChennaiIndia

Personalised recommendations