Advertisement

Intelligent chatter detection using image features and support vector machine

  • Yun Chen
  • Huaizhong Li
  • Xiubing Jing
  • Liang HouEmail author
  • Xiangjian Bu
ORIGINAL ARTICLE
  • 21 Downloads

Abstract

Chatter is a self-excited vibration that affects the part quality and tool life in the machining process. This paper introduces an intelligent chatter detection method based on image features and the support vector machine. In order to reduce the background noise and highlight chatter characteristics, the average FFT is applied to identify the dominant frequency bands that divide the time-frequency image of the short-time Fourier transform into several sub-images. The non-stationary properties of the machining conditions are quantified using sub-images features. The area under the receiver operating characteristics curve ranks the extracted image features according to their separability capabilities. The support vector machine is designed to automatically classify the machining conditions and select the best feature subset based on the ranked features. The proposed method is verified by using dry micro-milling tests of steel 1040 and high classification accuracies for both the stable and unstable tests are obtained. In addition, the proposed method is compared with two additional methods using either image features from the continuous wavelet transform or time-domain features. The results present a better classification performance than the two additional methods, indicating the efficiency of the proposed method for chatter detection.

Keywords

Micro-milling Chatter detection Image features Dominant frequency bands Support vector machine 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

This study was jointly supported by the Collaborative Innovation Center of High-End Equipment Manufacturing in Fujian and International Postdocs Exchange Program. The authors would like to express their acknowledgements to the Advanced Manufacturing Laboratory, UNSW, for the support of the experimental work. Comments and suggestions from reviewers are greatly appreciated.

References

  1. 1.
    Jin X, Altintas Y (2011) Slip-line field model of micro-cutting process with round tool edge effect. J Mater Process Technol 211(3):339–355CrossRefGoogle Scholar
  2. 2.
    Peng Y (2004) Empirical model decomposition based time-frequency analysis for the effective detection of tool breakage. J Manuf Sci Eng 128(1):154–166MathSciNetCrossRefGoogle Scholar
  3. 3.
    Li XQ, Wong YS, Nee AYC (1997) Tool wear and chatter detection using the coherence function of two crossed accelerations. Int J Mach Tool Manu 37(4):425–435CrossRefGoogle Scholar
  4. 4.
    Delio T, Tlusty J, Smith S (1992) Use of audio signals for chatter detection and control. J Eng Ind 114(2):146–157Google Scholar
  5. 5.
    Cao H, Yue Y, Chen X, Zhang X (2017) Chatter detection in milling process based on synchrosqueezing transform of sound signals. Int J Adv Manuf Technol 89(9):2747–2755CrossRefGoogle Scholar
  6. 6.
    Hashimoto M, Marui E, Kato S (1996) Experimental research on cutting force variation during regenerative chatter vibration in a plain milling operation. Int J Mach Tool Manu 36(10):1073–1092CrossRefGoogle Scholar
  7. 7.
    Cao H, Lei Y, He Z (2013) Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform. Int J Mach Tool Manu 69 (0):11–19Google Scholar
  8. 8.
    Cao H, Zhou K, Chen X (2015) Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators. Int J Mach Tool Manu 92 (0):52–59Google Scholar
  9. 9.
    Pérez-Canales D, Álvarez-Ramírez J, Jáuregui-Correa JC, Vela-Martínez L, Herrera-Ruiz G (2011) Identification of dynamic instabilities in machining process using the approximate entropy method. Int J Mach Tool Manu 51(6):556–564CrossRefGoogle Scholar
  10. 10.
    Vela-Martínez L, Carlos Jauregui-Correa J, Rodriguez E, Alvarez-Ramirez J (2010) Using detrended fluctuation analysis to monitor chattering in cutter tool machines. Int J Mach Tool Manu 50(7):651–657CrossRefGoogle Scholar
  11. 11.
    Griffin J, Chen X (2009) Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming. Int J Adv Manuf Technol 45(11–12):1152–1168CrossRefGoogle Scholar
  12. 12.
    Yao Z, Mei D, Chen Z (2010) On-line chatter detection and identification based on wavelet and support vector machine. J Mater Process Technol 210(5):713–719CrossRefGoogle Scholar
  13. 13.
    Liu Y, Wang X, Lin J, Zhao W (2016) Early chatter detection in gear grinding process using servo feed motor current. Int J Adv Manuf Technol 83(9):1801–1810CrossRefGoogle Scholar
  14. 14.
    Mei Y, Mo R, Sun H, Bu K (2017) Chatter detection in milling based on singular spectrum analysis. Int J Adv Manuf Technol 95(9–12):3475–3486Google Scholar
  15. 15.
    Materka A, Strzelecki M (1998) Texture analysis methods–a review. Technical University of Lodz, Institute of Electronics, COST B11 report, BrusselsGoogle Scholar
  16. 16.
    Alcn OF, Siuly S, Bajaj V, Guo Y, Sengur A, Zhang Y (2016) Multi-category EEG signal classification developing time-frequency texture features based Fisher vector encoding method. Neurocomputing 218:251–258CrossRefGoogle Scholar
  17. 17.
    Boashash B, Khan NA, Ben-Jabeur T (2015) Time–frequency features for pattern recognition using high-resolution TFDs: a tutorial review. Digit Signal Process 40:1–30MathSciNetCrossRefGoogle Scholar
  18. 18.
    Boashash B, Barki H, Ouelha S (2017) Performance evaluation of time-frequency image feature sets for improved classification and analysis of non-stationary signals: application to newborn EEG seizure detection. Knowl Based Syst 132:188–203CrossRefGoogle Scholar
  19. 19.
    Khalifa OO, Densibali A, Faris W (2006) Image processing for chatter identification in machining processes. Int J Adv Manuf Technol 31(5):443–449CrossRefGoogle Scholar
  20. 20.
    Li H, Jing X, Wang J (2014) Detection and analysis of chatter occurrence in micro-milling process. Proc Inst Mech Eng B J Eng Manuf 228(11):1359–1371CrossRefGoogle Scholar
  21. 21.
    Zhang Z, Li H, Meng G, Tu X, Cheng C (2016) Chatter detection in milling process based on the energy entropy of VMD and WPD. Int J Mach Tool Manu 108:106–112CrossRefGoogle Scholar
  22. 22.
    Attoui I, Fergani N, Boutasseta N, Oudjani B, Deliou A (2017) A new timefrequency method for identification and classification of ball bearing faults. J Sound Vib 397:241–265CrossRefGoogle Scholar
  23. 23.
    Huang NE, Wu Z (2009) Ensemble empirical mode decomposition: a noise-assisted data analysis method. Adv Adapt Data Anal 01(01):1–41CrossRefGoogle Scholar
  24. 24.
    Peng ZK, Tse PW, Chu FL (2005) An improved Hilbert–Huang transform and its application in vibration signal analysis. J Sound Vib 286(1–2):187–205CrossRefGoogle Scholar
  25. 25.
    Lamraoui M, Barakat M, Thomas M, Badaoui ME (2013) Chatter detection in milling machines by neural network classification and feature selection. J Vib Control 21(7):1251–1266CrossRefGoogle Scholar
  26. 26.
    Tansel IN, Wang X, Chen P, Yenilmez A, Ozcelik B (2006) Transformations in machining. Part 2. Evaluation of machining quality and detection of chatter in turning by using s-transformation. Int J Mach Tool Manu 46(1):43–50CrossRefGoogle Scholar
  27. 27.
    Yao ZH, Li X, Chen ZC (2007) Prediction of cutting chatter based on hidden Markov model. Key Eng Mat 353-358:2712–2715CrossRefGoogle Scholar
  28. 28.
    Teti R, Jemielniak K, O’Donnell G, Dornfeld D (2010) Advanced monitoring of machining operations. CIRP Ann Manuf Technol 59(2):717–739CrossRefGoogle Scholar
  29. 29.
    Wang Y, Bo Q, Liu H, Hu L, Zhang H (2018) Mirror milling chatter identification using Q-factor and SVM. Int J Adv Manuf Technol 98(5):1163–1177CrossRefGoogle Scholar
  30. 30.
    Burges CJC (1998) A tutorial on support vector machines for pattern recognition. Data Min Knowl Discov 2(2):121–167CrossRefGoogle Scholar
  31. 31.
    Hsueh Y-W, Yang C-Y (2009) Tool breakage diagnosis in face milling by support vector machine. J Mater Process Technol 209(1):145–152CrossRefGoogle Scholar
  32. 32.
    Chen Y, Li H, Hou L, Bu X (2018) Feature extraction using dominant frequency bands and time-frequency image analysis for chatter detection in milling. Precis Eng. online.Google Scholar
  33. 33.
    The MathWorks Inc Fast Fourier transformGoogle Scholar
  34. 34.
    Theodoridis S, Koutroumbas K (2009) Chapter 5 - feature selection. In: Pattern recognition, Fourth edn. Academic Press, Boston, pp 261–322Google Scholar
  35. 35.
    Theodoridis S, Pikrakis A, Koutroumbas K, Cavouras D (2010) CHAPTER 4 - feature selection. In: Introduction to pattern recognition. Academic Press, Boston, pp 107–135CrossRefGoogle Scholar
  36. 36.
    Albregtsen F (2008) Statistical texture measures computed from gray level coocurrence matrices. Department of Informatics, University of OsloGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Mechanical and Electrical EngineeringXiamen UniversityXiamenChina
  2. 2.Griffith School of Engineering, Gold Coast CampusGriffith UniversityBrisbaneAustralia
  3. 3.Key Laboratory of Mechanism Theory & Equipment Design of ministry of educationTianjin UniversityTianjinChina

Personalised recommendations