Advertisement

Thermo-mechanical modeling and microstructure evolution of friction-assisted tube-straining method

  • S. H. Hosseini
  • M. SedighiEmail author
ORIGINAL ARTICLE
  • 12 Downloads

Abstract

A thermo-mechanical model of friction-assisted tube-straining method is presented for commercially pure copper. A dislocation-based mechanical property model is embedded to commercial FE code ABAQUS/Standard to simulate Lagrangian, thermo-mechanically coupled with visco-plastic material behavior. A python script was added to FE code to automatically re-mesh the distorted elements in the deformation area. The friction coefficient was obtained from the combined experimental tests and numerical simulations. The load and temperature histories in both of the numerical and the experimental tests were compared and a good agreement was found. Microstructure and microhardness analysis of processed samples show the considerable changes in which the initial grain size 63 μm for the annealed sample was refined to 6.5 μm and the microhardness increases 200% greater than the initial value.

Keywords

FE analysis Automatic re-meshing Dislocation density Friction power Microstructure 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Valiev R, Islamgaliev R, Alexandrov I (2000) Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45:103–189CrossRefGoogle Scholar
  2. 2.
    Estrin Y, Vinogradov A (2013) Extreme grain refinement by severe plastic deformation: a wealth of challenging science. Acta Mater 61:782–817CrossRefGoogle Scholar
  3. 3.
    Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–981CrossRefGoogle Scholar
  4. 4.
    Sakai G, Nakamura K, Horita Z, Langdon TG (2005) Developing high-pressure torsion for use with bulk samples. Mater Sci Eng A 406:268–273CrossRefGoogle Scholar
  5. 5.
    Khatami R, Fattah-alhosseini A, Mazaheri Y, Keshavarz MK, Haghshenas M (2017) Microstructural evolution and mechanical properties of ultrafine grained AA2024 processed by accumulative roll bonding. Int J Adv Manuf Technol 93(1–4):681–689Google Scholar
  6. 6.
    J Richert MR (1986) A new method for unlimited deformation of metals and alloys. Aluminium 62:604–607Google Scholar
  7. 7.
    Arora HS, Singh H, Dhindaw BK (2012) Composite fabrication using friction stir processing - a review. Int J Adv Manuf Technol 61(9–12):1043–1055CrossRefGoogle Scholar
  8. 8.
    Hosseini SH, Abrinia K, Faraji G (2015) Applicability of a modified backward extrusion process on commercially pure aluminum. Mater Des 65:521–528Google Scholar
  9. 9.
    Jamali SS, Faraji G, Abrinia K (2016) Hydrostatic radial forward tube extrusion as a new plastic deformation method for producing seamless tubes Int J Adv Manuf Technol 88(1–4):291–301Google Scholar
  10. 10.
    Toth L, Arzaghi M, Fundenberger J, Beausir B, Bouaziz O, Arruffatmassion R (2009) Severe plastic deformation of metals by high-pressure tube twisting. Scr Mater 60:175–177CrossRefGoogle Scholar
  11. 11.
    Mohebbi MS, Akbarzadeh A (2010) Accumulative spin-bonding (ASB ) as a novel SPD process for fabrication of nanostructured tubes. Mater Sci Eng A 528:180–188CrossRefGoogle Scholar
  12. 12.
    Zangiabadi A, Kazeminezhad M (2011) Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP ). Mater Sci Eng A 528:5066–5072CrossRefGoogle Scholar
  13. 13.
    Faraji G, Mashhadi MM, Kim HS (2011) Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes. Mater Lett 65:3009–3012CrossRefGoogle Scholar
  14. 14.
    Faraji G, Babaei A, Mashhadi MM, Abrinia K (2012) Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes. Mater Lett 77:82–85CrossRefGoogle Scholar
  15. 15.
    Babaei A, Mashhadi MM, Jafarzadeh H (2014) Tube Cyclic Extrusion-Compression (TCEC) as a novel severe plastic deformation method for cylindrical tubes. Mater Sci Eng A 598:1–6CrossRefGoogle Scholar
  16. 16.
    Hosseini SH, Sedighi M (2016) On the feasibility of a novel severe plastic deformation method for cylindrical tubes; friction assisted tubular channel pressing (FATCP). J Mech Sci Technol 30:5153–5157CrossRefGoogle Scholar
  17. 17.
    Abu-farha F (2012) A preliminary study on the feasibility of friction stir back extrusion. Scr Mater 66:615–618CrossRefGoogle Scholar
  18. 18.
    He X, Fengshou Gu AB (2014) A review of numerical analysis of friction stir welding. Prog Mater Sci 65:1–66 ISSN 0079–6425CrossRefGoogle Scholar
  19. 19.
    Prasanna P, Rao B, Rao G (2010) Finite element modeling for maximum temperature in friction stir welding and its validation. Int J Adv Manuf Technol 51:925–933CrossRefGoogle Scholar
  20. 20.
    Zhang Z, Chen JT (2012) Computational investigations on reliable finite element-based thermomechanical-coupled simulations of friction stir welding. Int J Adv Manuf Technol 60:959–975CrossRefGoogle Scholar
  21. 21.
    Hernández CA, Ferrer VH, Mancilla JE, and Martínez LC (2017) Three-dimensional numerical modeling of the friction stir welding of dissimilar steels. Int J Adv Manuf Technol 93(5–8):1567–1581Google Scholar
  22. 22.
    Gök K, Aydin M (2013) Investigations of friction stir welding process using finite element method. Int J Adv Manuf Technol 68:775–780CrossRefGoogle Scholar
  23. 23.
    Assidi M, Fourment L, Guerdoux S, Nelson T (2010) Friction model for friction stir welding process simulation: calibrations from welding experiments. Int J Mach Tools Manuf 50:143–155CrossRefGoogle Scholar
  24. 24.
    Chen G, Ma Q, Zhang S, Wu J, Zhang G, Shi Q (2017) Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions. J Mater Sci Technol 34(1):128–134Google Scholar
  25. 25.
    User CAE (2013) Abaqus 6.13, analysis user guide. Dassault SystGoogle Scholar
  26. 26.
    Baffari D, Buffa G, Fratini L (2017) A numerical model for wire integrity prediction in friction stir extrusion of magnesium alloys. J Mater Process Technol 247:1–10CrossRefGoogle Scholar
  27. 27.
    Ding R, Guo ZX (2001) Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta Mater 49:3163–3175CrossRefGoogle Scholar
  28. 28.
    Kugler G, Turk R (2004) Modeling the dynamic recrystallization under multi-stage hot deformation. Acta Mater 52:4659–4668CrossRefGoogle Scholar
  29. 29.
    Hore S, Das SK, Banerjee S, Mukherjee S (2015) Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. J Manuf Process 17:78–87CrossRefGoogle Scholar
  30. 30.
    Lee HW, Im Y-T (2010) Cellular automata modeling of grain coarsening and refinement during the dynamic recrystallization of pure copper. Mater Trans 51:1614–1620CrossRefGoogle Scholar
  31. 31.
    Kocks UF (1976;ASME(H)) Laws for work-hardening and low-temprature Creep. J Eng Mater Technol 98:76–85CrossRefGoogle Scholar
  32. 32.
    Smith A, Chen Z, Lee JY, Lee MG, Wagoner RH (2014) Effective method for fitting complex constitutive equations. Int J Plast 58:100–119CrossRefGoogle Scholar
  33. 33.
    Sung JH, Kim JH, Wagoner RH (2010) A plastic constitutive equation incorporating strain, strain-rate, and temperature. Int J Plast 26:1746–1771CrossRefzbMATHGoogle Scholar
  34. 34.
    User CAE (2013) Abaqus 6.13, analysis user guideGoogle Scholar
  35. 35.
    Powell RW, Ho CY, Liley PE (1966) Thermal Conductivity of Selected Materials. Washington: U.S. Dept. of Commerce, National Bureau of Standards; for sale by the Superintendent of Documents, U.S. Govt. Print. OffGoogle Scholar
  36. 36.
  37. 37.
    Cartigueyen S, Sukesh OP, Mahadevan K (2014) Numerical and experimental investigations of heat generation during friction stir processing of copper. Procedia Eng 97:1069–1078CrossRefGoogle Scholar
  38. 38.
    Zhang H (2016) Numerical modeling of heat transfer and material flow during friction extrusion process. University of South Carolina, ColumbiaGoogle Scholar
  39. 39.
    Fagan T (2015) Computational modelling of friction stir processing. MONASH University, ClaytonGoogle Scholar
  40. 40.
    Chao YJ, Qi X, Tang W (2003) Heat transfer in friction stir welding—experimental and numerical studies. J Manuf Sci Eng 125:138CrossRefGoogle Scholar
  41. 41.
    Parvizian F, Schneidt A, Svendsen B, Mahnken R (2010) Thermo-mechanically coupled modeling and simulation of hot metal-forming processes using adaptive remeshing method. GAMM Mitteilungen 33:95–115.  https://doi.org/10.1002/gamm.201010008 CrossRefzbMATHGoogle Scholar
  42. 42.
    EngineersHandbooks. Reference tables, coefficient of friction. EngineersHandbooks 2006. http://www.engineershandbook.com/Tables/frictioncoefficients.htm
  43. 43.
    Asadi P, Besharati Givi MK, Parvin N, Araei A, Taherishargh M, Tutunchilar S (2012) On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91. Int J Adv Manuf Technol 63(9–12):987–997CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of Mechanical EngineeringIran University of Science and Technology (IUST)TehranIran

Personalised recommendations