Study on improving surface residual stress of polished blade after polishing based on two-stage parameter method

  • De LiuEmail author
  • Yaoyao Shi
  • Xiaojun Lin
  • Chao Xian


Surface residual stress is the one of the key factors affecting the mechanical properties of workpiece. Firstly, this article established the two-stage parameter method and analyzed the principle and advantages of two-stage parameter method. Secondly, the influence of the process parameters on the reason factors, the reason factors on the surface residual stress, and the process parameters on the surface residual stress were analyzed in turn through the single factor method. And then, based on the analysis results of single factor method, the influence of the process parameters on the reason factors was analyzed by the Grey relational theory. Finally, the data obtained from the Grey relational optimization method were tested and analyzed. The experimental results show that using the optimal process parameters and cooling the blade by coolant during the polishing process can make the reason factors more reasonable and improve the surface residual stress.


Surface residual stress Flexible grinding head (FGH) Process parameters Reason factors Two-stage parameter method 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


Funding information

This work has been supported by the National Natural Science Foundation of China (No. 51675439) and the National Science and Technology Major Projects of China (No.2015ZX04001003).


  1. 1.
    Bouillot B, Keller A, Langeard D, Martinez A, Nguyen GM (2006) Automated polishing process for mechanical parts in titanium or titanium alloy: US, US 7029367Google Scholar
  2. 2.
    Du HP, Sun YW, Feng DY, Xu JT (2015) Automatic robotic polishing on titanium alloy parts with compliant force/position control. Proc Inst Mech Eng B J Eng Manuf 229(7):1180–1192CrossRefGoogle Scholar
  3. 3.
    Jawahir IS, Brinksmeier E, M'saoubi R, Aspinwall DK, Outeiro JC, Meyer D, Jayal AD (2011) Surface integrity in material removal processes: recent advances. CIRP Ann Manuf Technol 60(2):603–626CrossRefGoogle Scholar
  4. 4.
    Huang Y, Xiao GJ, Zhou L (2016) Research status and development trend of bladed disc polishing technology. Ac Aero Et Astr Sin 37(7):2045–2064Google Scholar
  5. 5.
    Ye XX, Yang JF, Chai Y, Huang Y (2014) An abrasive belt grinding device suitable for the inner and outer cambered surfaces of aerospace bladed disk: CN 102729124 BGoogle Scholar
  6. 6.
    Xiao GJ, Huang Y, Wang J (2017) Path planning method for longitudinal micromarks on blisk root-fillet with belt grinding. Int J Adv Manuf Technol 7:1–14Google Scholar
  7. 7.
    Xiao GJ, Huang Y, Yi H (2016) A new method and experimental study of abrasive belt grinding for integral bladed surfaces with identical accuracy of surface alignment. Ac Aero Et Astr Sin 37(5):1666–1676Google Scholar
  8. 8.
    Xiao GJ, Huang Y (2015) Constant-load adaptive belt polishing of the weak-rigidity blisk blade. Int J Adv Manuf Technol 78(9–12):1473–1484CrossRefGoogle Scholar
  9. 9.
    Xiao GJ, Huang Y, Yin JC (2017) An integrated polishing method for compressor blade surfaces. Int J Adv Manuf Technol 88(5–8):1723–1733CrossRefGoogle Scholar
  10. 10.
    Shi YY, Duan JH, Zhang JF, Dong T (2012) Summary of manufacturing technology of bladed disk. Aer Manuf Tech 399(3):26–31Google Scholar
  11. 11.
    Zhao T, Shi YY, Lin XJ, Duan JH, Sun PC, Zhang J (2014) Surface roughness prediction and parameters optimization in grinding and polishing process for IBR of aero-engine. Int J Adv Manuf Technol 74(5–8):653–663CrossRefGoogle Scholar
  12. 12.
    Zhao T, Shi YY, Laakso S, Zhou JM (2017) Investigation of the effect of grinding parameters on surface quality in grinding of TC4 titanium alloy. International Conference on Flexible Automation and Intelligent Manufacturing, Faim2017, 27-30 June 2017, Modena, Italy (Vol.11, pp. 2131–2138)Google Scholar
  13. 13.
    Huai WB, Shi YY, Tang H, Lin XJ (2017) Sensitivity of surface roughness to flexible polishing parameters of abrasive cloth wheel and their optimal intervals. J Mech Sci Technol 31(2):865–873CrossRefGoogle Scholar
  14. 14.
    Huai WB, Tang H, Shi YY, Lin XJ (2016) Prediction of surface roughness ratio of polishing blade of abrasive cloth wheel and optimization of processing parameters. Int J Adv Manuf Technol 90(1–4):1–10Google Scholar
  15. 15.
    Zhao PB, Shi YY (2014) Posture adaptive control of the flexible grinding head for blisk manufacturing. Int J Adv Manuf Technol 70(9–12):1989–2001.16CrossRefGoogle Scholar
  16. 16.
    Chai GY, Zhao PP (2010) Application of fuzzy self-adaptive PID controller in the hydraulic automatic gauge control system. Machine Tool & HydraulicsGoogle Scholar
  17. 17.
    Zhang JF, Shi YY, Lin XJ, Li ZS (2017) Five-axis abrasive belt flap wheel polishing method for leading and trailing edges of aero-engine blade. Int J Adv Manuf Technol 93(9–12):3383–3393CrossRefGoogle Scholar
  18. 18.
    Duan JH, Shi YY, Li XJ (2011) Adaptive polishing for blisk by flexible grinding head. Ac Aero Et Astr Sin 32(5):934–940Google Scholar
  19. 19.
    Duan JH, Shi YY, Zhang JF, Dong T (2012) Flexible polishing technology for blade of aviation engine. Ac Aero Et Astr Sin 33(3):573–578Google Scholar
  20. 20.
    Brinksmeier E, Riemer O, Schulte H (2010) Material removal mechanisms in abrasive vibration polishing of complex molds. Proc SPIE 7655:765502–765502-6CrossRefGoogle Scholar
  21. 21.
    Ji SM, Jin MS, Zhang X, Zhang L, Zhang YD, Yuan JL (2007) Novel gasbag polishing technique for free-form mold. Chin J Mech Engin 8:004Google Scholar
  22. 22.
    Wang XP, Fu YZ, Gao H (2016) Study on effect of viscoelastic properties on surface roughness uniformity in abrasive flow machining for plate surface. Adv Mater Res 1136:131–134CrossRefGoogle Scholar
  23. 23.
    Peng YH, Hou HL, Li ZF (2015) Research of two heads and constant force of blade polishing technology. Mac Desi & ReseGoogle Scholar
  24. 24.
    Yao CF, Jin QC, Huang XC, Wu DX, Ren JX, Zhang DH (2013) Research on surface integrity of grinding inconel718. Int J Adv Manuf Technol 65(5–8):1019–1030CrossRefGoogle Scholar
  25. 25.
    Yao CF, Wu DB, Ma LF, Tan L, Zhou Z, Zhang JY (2016) Surface integrity evolution and fatigue evaluation after milling mode, shot-peening and polishing mode for tb6 titanium alloy. Appl Surf Sci 387:1257–1264CrossRefGoogle Scholar
  26. 26.
    Yao CF, Tan L, Yang P, Zhang DH (2017) Effects of tool orientation and surface curvature on surface integrity in ball end milling of tc17. Int J Adv Manuf Technol 5–6:1–12Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Mechanical and ElectronicalNorthwestern Polytechnical UniversityXi’an 710072China

Personalised recommendations