Investigations into process mechanics of rough and finish die sinking EDM using pulse train analysis
- 29 Downloads
Electrical discharge machining (EDM) is extensively used for machining difficult-to-machine materials and complicated shapes. Its performance in terms of material removal rate and surface roughness is usually analyzed using the process parameters such as setting voltage, setting current, pulse on time, and duty factor. It is well known that interelectrode gap condition controls the EDM performance, and it is difficult to observe the gap phenomena directly. Literature reveals that the combined influence of pulse types and their individual contributions on material removal rate and surface roughness has been ignored. In the present work, rough and finish EDM conditions are identified from a large set of 125 experiments carried out on hardened D3 die steel. From the voltage and current pulse trains in each regime, pulse characteristics and five different pulse types are assessed by a unique thresholding approach. Based on the pulse details, two new parameters such as energy expended (E) at the electrode gap over a second and a performance factor (PF) giving ratio of energy associated with the sparks to total energy expended have been proposed. It is found that a higher PF of 0.757 at a relatively lower expended energy of 113.7 J leads to a favorable condition in rough machining. A relatively lower E of 29.7 J and a higher PF of 1.00 are favorable for finish machining. Cross-sectional images of the ED machined workpieces are also included as evidences. The proposed thresholding methodology has a potential for online monitoring, analysis, and control of EDM process.
KeywordsElectrical discharge machining D3 die steel Pulse train analysis Rough machining Finish machining Machining parameters
Unable to display preview. Download preview PDF.
The authors are thankful to DST (Grant No. SR/S3/MERC˗68/2004 dated 08˗06˗2007) and IIT Madras (Grant No. MEE/03˗04/181/IDRP/OVKC dated 01˗10˗2003) for providing the measurement facilities, at the Manufacturing Engineering Section, necessary to carry out the present investigation.
- 2.Assarzadeh S, Ghoreishi M (2017) Electro˗thermal˗based finite element simulation and experimental validation of material removal in static gap single˗spark die˗sinking electro˗discharge machining process. Proc IMechE, Pt B: J Eng Manuf 231(1):28–47. https://doi.org/10.1177/0954405415572661 CrossRefGoogle Scholar
- 15.Koenig W, Wertheim R, Zvirin Y, Toren M (1975) Material removal and energy distribution in electrical discharge machining. Ann CIRP 24(1):95–100Google Scholar
- 17.MatLab R10a, MathWorks, Inc., 2010Google Scholar
- 24.Snoeys R, Cornelissen H (1975) Correlation between electro˗discharge machining data and machine settings. Ann CIRP 24(1):83–88Google Scholar
- 26.Stavropoulos P, Chantzis D, Doukas C, Papacharalampopoulos A, Chryssolouris G (2013) Monitoring and control of manufacturing processes: a review. Procedia CIRP, 14th CIRP Conference on Modelling of Machining Operations (CIRP CMMO), 13–14 June, Turin, Italy. doi: https://doi.org/10.1016/j.procir.2013.06.127
- 27.Takezawa H, Kokubo H, Mohri N, Horio K (2008) A study on single discharge machining with low melting temperature alloy(1st report)˗The relationship between removal volume of crater and single discharge conditions. J JpN Soc Electr Mach Eng 42:5–11Google Scholar