Tribological behaviors in titanium sheet and tube forming at elevated temperatures: evaluation and modeling

ORIGINAL ARTICLE
  • 24 Downloads

Abstract

Warm forming has been an efficient approach to exploiting the forming potential of titanium alloy sheet and tube materials. However, the tribological condition between Ti-alloy sheet/tube and tools at elevated temperatures is a non-trivial issue and has yet not been fully explored and articulated. Taking CP-3 tube and Ti-6Al-4V sheet as case study materials, the tribological behaviors between Ti-alloy sheet/tube and tools at elevated temperature are revealed and modeled. The main results show that (1) by using the high-temperature twist-compression test combined with the design of experiments, the suitable tool materials, surface modification approaches, and lubricants are determined for warm forming of Ti-alloy sheet/tube, and the significant influential factors and their affecting rules/mechanisms on the coefficient of friction are identified; (2) a pressure- and temperature-related dynamic friction model is developed and implemented in the 3D-FE simulation of warm forming via ABAQUS/VFRIC; taking warm rotary draw bending of CP-3 tube as an application, the proposed friction model is experimentally validated, and the comparisons between the experimental results and the simulated ones indicate that the proposed model is much better than the Coulomb friction model in prediction of forming defects, such as wall thinning/thickening and wrinkling instability.

Keywords

Titanium alloy sheet/tube Tribological behaviors Elevated temperatures Coefficient of friction Friction model 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.
    Veiga C, Davim JP, Loureiro AJR (2012) Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci 32(2):133–148Google Scholar
  2. 2.
    Beal JD, Boyer R, Sanders D (2006) Forming of titanium and titanium alloys. Metalwork: Sheet Form (ASM Handbook) 14B: 656–669Google Scholar
  3. 3.
    Li H, Zhang HQ, Yang H, Fu MW, Yang H (2017) Anisotropic and asymmetrical yielding and its evolution in plastic deformation: titanium tubular materials. Int J Plast 90:177–211CrossRefGoogle Scholar
  4. 4.
    Toros S, Ozturk F, Kacar I (2008) Review of warm forming of aluminum-magnesium alloys. J Mater Process Technol 207:1–3): 1–12CrossRefGoogle Scholar
  5. 5.
    Neugebauer R, Altan T, Geiger M, Kleiner M, Sterzing A (2006) Sheet metal forming at elevated temperatures. CIRP Ann Manuf Technol 55(2):793–816CrossRefGoogle Scholar
  6. 6.
    Wagoner RH, Lim H, Lee MG (2013) Advanced issues in springback. Int J Plast 45(45):3–20CrossRefGoogle Scholar
  7. 7.
    Wang D, Yang H, Li H (2014) Advance and trend of friction study in plastic forming. Trans Nonferrous Met Soc China 24(5):1263–1272CrossRefGoogle Scholar
  8. 8.
    Dohda K, Boher C, Rezai-Aria F, Mahayotsanun N (2015) Tribology in metal forming at elevated temperatures. Friction 3(1):1–27CrossRefGoogle Scholar
  9. 9.
    Ma J, Yang H, Li H, Wang D, Li GJ (2015) Tribological behaviors between commercial pure titanium sheet and tools in warm forming. Trans Nonferrous Metals Soc China 25(9):2924–2931CrossRefGoogle Scholar
  10. 10.
    Karbasian H, Tekkaya AE (2010) A review on hot stamping. J Mater Process Technol 210(15):2103–2118CrossRefGoogle Scholar
  11. 11.
    Fratini L, Lo Casto S, Lo Valvo E (2006) A technical note on an experimental device to measure friction coefficient in sheet metal forming. J Mater Process Technol 172(1):16–21CrossRefGoogle Scholar
  12. 12.
    Kim H, Sung J, Goodwin FE, Altan T (2008) Investigation of galling in forming galvanized advanced high strength steels (AHSSs) using the twist compression test (TCT). J Mater Process Technol 205(1–3):459–468CrossRefGoogle Scholar
  13. 13.
    Hardell J, Kassfeldt E, Prakash B (2008) Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 °C. Wear 264(9–10):788–799CrossRefGoogle Scholar
  14. 14.
    Azushima A, Uda K, Yanagida A (2012) Friction behavior of aluminum-coated 22MnB5 in hot stamping under dry and lubricated conditions. J Mater Process Technol 212(5):1014–1021CrossRefGoogle Scholar
  15. 15.
    Ghiotti A, Sgarabotto F, Bruschi S (2013) A novel approach to wear testing in hot stamping of high strength boron steel sheets. Wear 302(1–6):1319–1326CrossRefGoogle Scholar
  16. 16.
    Lee BH, Keum YT, Wagoner RH (2002) Modeling of the friction caused by lubrication and surface roughness in sheet metal forming. J Mater Process Technol 130:60–63CrossRefGoogle Scholar
  17. 17.
    Szakaly ED, Lenard JG (2010) The effect of process and material parameters on the coefficient of friction in the flat-die test. J Mater Process Technol 210(6–7):868–876CrossRefGoogle Scholar
  18. 18.
    Amanov A, Sasaki S (2013) A study on the tribological characteristics of duplex-treated Ti-6Al-4V alloy under oil-lubricated sliding conditions. Tribol Int 64(3):155–163CrossRefGoogle Scholar
  19. 19.
    Wu Z, Xing Y, Huang P, Liu L (2017) Tribological properties of dimple-textured titanium alloys under dry sliding contact. Surf Coat Technol 309:21–28CrossRefGoogle Scholar
  20. 20.
    Li LX, Peng DS, Liu JA, Liu ZQ (2001) An experiment study of the lubrication behavior of graphite in hot compression tests of Ti-6Al-4V alloy. J Mater Process Technol 112(1):1–5CrossRefGoogle Scholar
  21. 21.
    Abedini M, Ghasemi HM, Ahmadabadi MN (2010) Tribological behavior of NiTi alloy against 52100 steel and WC at elevated temperatures. Mater Charact 61(7):689–695CrossRefGoogle Scholar
  22. 22.
    Sharma MD, Sehgal R, Pant M (2016) Tribological behavior of Ti3Al2.5V alloy sliding against EN-31 steel under dry condition. Tribol Trans 59(3):451–461CrossRefGoogle Scholar
  23. 23.
    Banerji A, Bhowmick S, Alpas AT (2014) High temperature tribological behavior of W containing diamond-like carbon (DLC) coating against titanium alloys. Surf Coat Technol 241(3):93–104CrossRefGoogle Scholar
  24. 24.
    Wang D, Li H, Yang H, Ma J (2014) Tribological evaluation of surface modified H13 tool steel in warm forming of Ti-6Al-4V titanium alloy sheet. Chi006E J Aeronaut 27(4):1002–1009CrossRefGoogle Scholar
  25. 25.
    Lee JY, Barlat F, Lee MG (2015) Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets. Int J Plast 71:113–135CrossRefGoogle Scholar
  26. 26.
    Hol J, Alfaro MVC, De Rooij MB, Meinders T (2012) Advanced friction modeling for sheet metal forming. Wear 286–287(11):66–78CrossRefGoogle Scholar
  27. 27.
    Bay N, Wanheim T (1976) Real area of contact and friction stress at high pressure sliding contact. Wear 38(2):201–209CrossRefGoogle Scholar
  28. 28.
    Wilson WRD, Hsu TC, Huang XB (1995) A realistic friction model for computer simulation of sheet metal forming processes. J Eng Ind 117(2):202–209CrossRefGoogle Scholar
  29. 29.
    Tan X, Yan XT, Juster NP, Raghunathan S, Wang J (2008) Dynamic friction model and its application in flat rolling. J Mater Process Technol 207(1–3):222–234CrossRefGoogle Scholar
  30. 30.
    Bay N, Eriksen M, Tan X, Wibom O (2011) A friction model for cold forging of aluminum, steel and stainless steel provided with conversion coating and solid film lubricant. CIRP Ann Manuf Technol 60(1):303–306CrossRefGoogle Scholar
  31. 31.
    Garde AM, Santhanam AT, Reed-Hill RE (1972) The significance of dynamic strain aging in titanium. Acta Metall 20(2):215–220CrossRefGoogle Scholar
  32. 32.
    Huang W, Zan X, Nie X, Gong M, Wang Y, Xia Y (2007) Experimental study on the dynamic tensile behavior of a poly-crystal pure titanium at elevated temperatures. Mater Sci Eng A 443(1–2):33–41CrossRefGoogle Scholar
  33. 33.
    Tsao LC, Wu HY, Leong JC, Fang CJ (2012) Flow stress behavior of commercial pure titanium sheet during warm tensile deformation. Mater Des 34:179–184CrossRefGoogle Scholar
  34. 34.
    Zhang ZY, Yang H, Li H, Ren N, Wang D (2013) Quasi-static tensile behavior and constitutive modeling of large diameter thin-walled commercial pure titanium tube. Mater Sci Eng A 569:96–105CrossRefGoogle Scholar
  35. 35.
    Joun MS, Moon HG, Choi IS, Lee MC, Jun BY (2009) Effects of friction laws on metal forming processes. Tribol Int 42(2):311–319CrossRefGoogle Scholar
  36. 36.
    Zhang ZY, Yang H, Li H, Tao ZJ, Wang D (2014) Thermo-mechanical coupled 3D-FE modeling of heat rotary draw bending for large-diameter thin-walled CP-Ti tube. Int J Adv Manuf Technol 72(9–12):1187–1203CrossRefGoogle Scholar
  37. 37.
    Hill R (1948) A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc A 193:281–297MathSciNetCrossRefMATHGoogle Scholar
  38. 38.
    Yang H, Li H, Zhan M (2010) Friction role in bending behaviors of thin-walled tube in rotary-draw-bending under small bending radii. J Mater Process Technol 210(15):2273–2284CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.State Key Laboratory of Solidification Processing, School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’anPeople’s Republic of China
  2. 2.Department of Mechanical EngineeringThe Hong Kong Polytechnic UniversityHong KongPeople’s Republic of China

Personalised recommendations