Energy-efficient scheduling of flexible flow shop of composite recycling
- 22 Downloads
Composite recycling technologies have been developed to tackle the increasing use of composites in industry and as a result of restrictions placed on landfill disposal. Mechanical, thermal and chemical approaches are the existing main recycling techniques to recover the fibres. Some optimisation work for reducing energy consumed by above processes has also been developed. However, the resource efficiency of recycling composites at the workshop level has never been considered before. Considering the current trend of designing and optimising a system in parallel and the future needs of the composite recycling business, a flexible flow shop for carbon fibre reinforced composite recycling is modelled. Optimisation approaches based on non-dominated sorting genetic algorithm II (NSGA-II) have been developed to reduce the time and energy consumed for processing composite wastes by searching for the optimal sub-lot splitting and resource scheduling plans. Case studies on different composite recycling scenarios have been conducted to prove the feasibility of the model and the developed algorithm.
KeywordsEnergy-efficient scheduling Composite recycling Flexible flow shop scheduling Multi-objective optimisation Genetic algorithms
The funding from EPSRC for the EXHUME project (EP/K026348/1) is gratefully acknowledged.
- 2.Baniszewski B (2005) An environmental impact analysis of grinding. Archives. Massachusetts Institute of TechnologyGoogle Scholar
- 3.Carberry W (2008) Airplane recycling efforts benefit Boeing operators. Aero mag. Boeing Quater 4:6–13Google Scholar
- 6.Dahal KP, Tan KC, Cowling Pl, (2007) Evolutionary Scheduling. Springer-Verlag Berlin HeidelbergGoogle Scholar
- 7.Dahmus JB (2007) Applications of industrial ecology manufacturing, recycling, and efficiency, Department of mechanical engineering. massachusetts institute of technologyGoogle Scholar
- 9.Drake R, Yildirim MB, Twomey J, Whitman L, Ahmad J, Lodhia P (2006) Data collection framework on energy consumption in manufacturing. Institute of industrial engineering research conferenceGoogle Scholar
- 12.Kalla D, Twomey J, Overcash M (2009) MR4 turning process unit process life cycle inventory., pp. 1–28Google Scholar
- 13.Kaminsky W (2010) Fluidised bed pyrolysis of waste polymer composites for oil and gas recovery. In: Management, recycling and reuse of waste composites. pp. 192–213Google Scholar
- 15.Lester E, Kingman S, Hoong K, Rudd C, Pickering S, Hilal N (2004a) Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study. 39, 1549–1556Google Scholar
- 20.Ono I, Yamamura M, Kobayashi S (1996) A Genetic algorithm for job shop scheduling problems using job based order crossover., pp. 3–8Google Scholar
- 21.Oyedun A, Lam K (2012) Optimisation of operating parameters in multi-stage pyrolysis. Chem Eng Trans 29:655–660Google Scholar
- 24.Pinedo ML (2012) Scheduling: theory, algorithms, and systems, 4th edn. Springer, New YorkGoogle Scholar
- 25.Rabiee M, Zandieh M, Ramezani P (2012) Bi-objective partial flexible job shop scheduling problem: NSGA-II, NRGA, MOGA and PAES approaches. Int J Prod Res 50:7327–7342Google Scholar
- 26.Rajemi MF (2010) Energy analysis in turning and milling. Ph.D. dissertation, School of mechanical, aerospace and civil engineering, University of Manchester, ManchesterGoogle Scholar
- 27.Shuaib NA (2014) Literature review on energy demand for different composite recycling methods and pilot study on microwave pyrolysisGoogle Scholar
- 29.Vilcot G, Billaut JC (2008) A tabu search and a genetic algorithm for solving a bi-criteria general job shop scheduling problem. Eur J Oper Res 190:398–411Google Scholar
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.