Advertisement

Process model and experimental analysis of circumferential extending extrusion forming for magnesium alloy sheet

  • Ye Wang
  • Feng LiEmail author
  • Xue Wen Li
  • Wen Bin Fang
ORIGINAL ARTICLE
  • 18 Downloads

Abstract

In order to further enrich the existing manufacturing methods and approaches of magnesium alloy sheet forming, a new process of circumferential extending extrusion forming of magnesium alloy sheet, which focuses on the process principle and characteristics of the method, is proposed in this paper. Through theoretical analysis, technological theoretical models such as the dimension relationship between the original billet and the formed sheet and the extrusion speed were deduced. The circumferential extending extrusion process of AZ31 magnesium alloy sheets was experimented. The results show that the backpressure ring of pure aluminum can change the stress state of the sheet during extending extrusion and effectively restrain the change of sheet thinning trend and cracking defects at the outer edge caused by tensile stress, and the product quality is improved remarkably. According to the actual requirements, the size of the required sheets can be customized. It can be seen from the comparison that as the distance from the axis increases, the average grain size of the product decreases remarkably, and and the degree of recrystallization is higher. Meanwhile, the microstructure is refined. With the maturity of the process, it is expected to provide a new idea for the short-process forming of high-performance lightweight alloy sheets.

Keywords

Magnesium alloy Extending extrusion Process model Microstructure Recrystallization 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Funding information

This project is supported by the National Natural Science Foundation of China (No. 51675143) and State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology (AWJ-19M01). The authors would like to take this opportunity to express their sincere appreciation.

References

  1. 1.
    He JJ, Jiang B, Xu J, Zhang JY, Yu XW, Liu B, Pan FS (2017) Effect of texture symmetry on mechanical performance and corrosion resistance of magnesium alloy sheet. J Alloys Compd 723:213–224CrossRefGoogle Scholar
  2. 2.
    Pan FS, Zeng B, Jiang B, Zhang MX, Dong HW (2017) Enhanced mechanical properties of AZ31B magnesium alloy thin sheets processed by on-line heating rolling. J Alloys Compd 693:414–420CrossRefGoogle Scholar
  3. 3.
    Zhang WY, Ju DY, Zhao HY, Hu XD, Yao Y, Zhang YJ (2015) A decoupling control model on perturbation method for twin-roll casting magnesium alloy sheet. J Mater Sci Technol 31:517–522CrossRefGoogle Scholar
  4. 4.
    Li F, Liu Y, Li XB (2017) Microstructure evolution and deformation behavior of AZ31 magnesium alloy during alternate forward extrusion. Acta Metall Sin Engl 30:1135–1144CrossRefGoogle Scholar
  5. 5.
    Su J, Kabir ASH, Sanjari M, Yue S (2016) Correlation of static recrystallization and texture weakening of AZ31 magnesium alloy sheets subjected to high speed rolling. Mater Sci Eng A 674:343–360CrossRefGoogle Scholar
  6. 6.
    Su J, Sanjari M, Kabir ASH, Jonas JJ, Yue S (2016) Static recrystallization behavior of magnesium AZ31 alloy subjected to high speed rolling. Mater Sci Eng A 662:412–425CrossRefGoogle Scholar
  7. 7.
    Wang WK, Chen WZ, Zhang WC, Cui GR, Wang ED (2017) Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling. Mater Sci Eng A 712Google Scholar
  8. 8.
    Chen WZ, Zhang WC, Qiao YD, Miao Q, Wang ED (2016) Enhanced ductility in high-strength fine-grained magnesium and magnesium alloy sheets processed via multi-pass rolling with lowered temperature. J Alloys Compd 665:13–20CrossRefGoogle Scholar
  9. 9.
    Chino Y, Lee JS, Sassa K, Kamiya A, Mabuchi M (2006) Press formability of a rolled AZ31 Mg alloy sheet with controlled texture. Mater Lett 60:173–176CrossRefGoogle Scholar
  10. 10.
    Pérez-prado MT, Valle D, Ruano OA (2004) Grain refinement of Mg-Al-Zn alloys via accumulative roll bonding. Scripta Mater 51:1093–1097CrossRefGoogle Scholar
  11. 11.
    Chang H, Zheng MY, Wu K, Gan WM, Tong LB, Brokmeier HG (2010) Microstructure and mechanical properties of the accumulative roll bonded (ARBed) pure magnesium sheet. Mater Sci Eng A 527:7176–7183CrossRefGoogle Scholar
  12. 12.
    Wang Y, Kang SB, Cho J (2011) Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casting and sequential warm rolling. J Alloys Compd 509:704–711CrossRefGoogle Scholar
  13. 13.
    Chen HM, Yu HS, Kang SB, Cho JH, Min G (2009) Optimization of annealing treatment parameters in a twin roll cast and warm rolled ZK60 alloy sheet. Mater Sci Eng A 527:1236–1242CrossRefGoogle Scholar
  14. 14.
    Chang LL, Kang SB, Cho JH (2013) Influence of strain path on the microstructure evolution and mechanical properties in AM31 magnesium alloy sheets processed by differential speed rolling. Mater Des 44:144–148CrossRefGoogle Scholar
  15. 15.
    Wang QH, Song JF, Jiang B, Tang AT, Chai YF, Yang TH, Huang GS, Pan FS (2018) An investigation on microstructure, texture and formability of AZ31 sheet processed by asymmetric porthole die extrusion. Mater Sci Eng A 720:85–97CrossRefGoogle Scholar
  16. 16.
    Wang QH, Jiang B, Chai YF, Liu B, Ma SX, Xu J, Pan FS (2016) Tailoring the textures and mechanical properties of AZ31 alloy sheets using asymmetric composite extrusion. Mater Sci Eng A 673:606–615CrossRefGoogle Scholar
  17. 17.
    Kim K, Yoon J (2015) Effect of the initial crystallographic texture on microstructure and mechanical properties of Mg-3Al-1Zn sheet alloy processed by half channel angular extrusion (HCAE). Int J Precis Eng Man 16:1021–1027CrossRefGoogle Scholar
  18. 18.
    Chen G, Zhang S, Zhang HM, Han F, Wang G, Chen Q, Zhao ZD (2010) Controlling liquid segregation of semi-solid AZ80 magnesium alloy by back pressure thixoextruding. J Mater Process TechnolGoogle Scholar
  19. 19.
    Chen G, Chen Q, Qin J, Du ZM (2016) Effect of compound loading on microstructures and mechanical properties of 7075 aluminum alloy after severe thixoformation. J Mater Process Technol 229:380457–380474Google Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Materials Science and EngineeringHarbin University of Science and TechnologyHarbinChina
  2. 2.State Key Laboratory of Advanced Welding and JoiningHarbin Institute of TechnologyHarbinChina

Personalised recommendations