Springer Nature is making SARS-CoV-2 and COVID-19 research free. View research | View latest news | Sign up for updates

Modeling and prediction research on wear of electroplated diamond micro-grinding tool in soda lime glass grinding

  • 201 Accesses

  • 3 Citations

Abstract

Micro-wear in micro-grinding process is very important to research the micro-tools wear and the service life prediction of the micro-tools. The wear mechanism of electroplated diamond micro-grinding tool is analyzed in this paper. The geometric and mathematical modeling is established in allusion to the composite mechanism in micro-grinding zone and the main characteristics of the wear forms. The prediction model of micro-wear is established by considering the size effect and the minimum chip thickness. Experiments with different grinding parameters in micro-grinding soda lime glass are carried out to confirm the validity of the model. The influence of the worn micro-grinding tools are proposed by analyzing the diameter of grinding head, the ratio of wear and fracture grains, the surface roughness of the specimens, and different grinding parameters. The test results show that the grinding head diameter decreases rapidly and sharply first and then decreases slowly and steadily. The wear is more slowly with better surface quality. The wear rate and the ratio of wear and fracture grains increase with the increasing of grinding and feed speeds, and the ratio has a linear trend integrally. It provides the experimental reference and the theoretical basis for improving the grinding performance and extending the service life of micro-grinding tools.

This is a preview of subscription content, log in to check access.

References

  1. 1.

    Li BM, Zhao B (2003) Modern grinding technology. China Machine Press, Beijing

  2. 2.

    Ding WF, Zhu YJ, Zhang LC, Xu JH, Liu WD, Yang CY (2014) Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels. Wear 332–333:800–809

  3. 3.

    Ding K, Fu YC, Su HH, Gong XB, Wu KQ (2014) Wear of diamond grinding wheel in ultrasonic vibration-assisted grinding of silicon carbide. Int J Adv Manuf Technol 71:1929–1938

  4. 4.

    Yin S, Ohmori H, Uehara Y, Shimizu T, Lin W (2004) Micro V-groove grinding technique of large germanium immersion grating element for mid-infrared spectrograph. Int J Japan Society Mech Eng 47(1):59–65

  5. 5.

    Feng J, Kim GY, Shih AJ, Ni J (2007) Investigation of the micro-end grinding of ceramics using a sintered metal-bonded microgrinding wheel. Int Symp Adv Abras Technol 413–420

  6. 6.

    Uhlmann E, Sammler F, Meixner M, Heinrich D, Gansert F, Reimers W, Berger D, Rieck I (2015) Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools. Prod Eng Res Devel 9:99–107

  7. 7.

    Gelfusa G, Turchetta S (2014) Cutting force and tool wear of single diamond-coated bead. Int J Adv Manuf Technol 72:1063–1072

  8. 8.

    Jackson MJ, Whitfield MD, Burgess J (2006) Vertical spindle surface grinding of AISI 1020 and A36 steels using duplex grade vitrified abrasive segments. Int J Adv Manuf Technol 87:3459–3471

  9. 9.

    Liu LF, Zhang FH (2016) Prediction model of form error influenced by grinding wheel wear in grinding process of large-scale aspheric surface with SiC ceramics. Int J Adv Manuf Technol 88:899–906

  10. 10.

    Cheng J, Wang C, Wen XL, Yin GQ, Gong YD, Song H (2014) Experimental investigation on material removal process for micro-grinding of single crystal silicon. Chi J Mech Eng 50(17):194–200

  11. 11.

    Cheng J, Gong YD, Wu ZZ, Wang C, Cao ZX, Liu YM (2012) Experimental study on mechanism of surface formation for micro-grinding of hard brittle material. Chi J Mech Eng 48(21):190–201

  12. 12.

    Li XK, Rong YM (2011) Framework of grinding process modeling and simulation based on microscopic interaction analysis. Robot Comput Integr Manuf 27(2):471–478

  13. 13.

    Cheng J, Yd G (2013) Experimental study on ductile-regime micro-grinding character of soda-lime glass with diamond tool. Int J Adv Manuf Technol 69(1):147–160

  14. 14.

    Liu XS, Zhou Y, Ma YL (1998) Modeling the tool wear and detecting in boring. High Technol Letters 7:11–15

  15. 15.

    Zhong HZ (1984) Research on grinding wheel wear. Dia & Abra Eng 4(3):35–39

Download references

Author information

Correspondence to Xuelong Wen.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Wen, X., Gong, Y. Modeling and prediction research on wear of electroplated diamond micro-grinding tool in soda lime glass grinding. Int J Adv Manuf Technol 91, 3467–3479 (2017). https://doi.org/10.1007/s00170-017-9992-y

Download citation

Keywords

  • Micro-grinding
  • Wear
  • Modeling and prediction
  • Soda lime glass