Advertisement

Multilayer thin film CrN coating on aerospace AL7075-T6 alloy for surface integrity enhancement

  • E. ZalnezhadEmail author
  • Ahmed A. D. Sarhan
ORIGINAL ARTICLE

Abstract

Chromium nitride (CrN) coating has emerged as a new alternative in machining applications. CrN has good thermal stability, low deposition temperature, and excellent wear and corrosion resistance. However, no precise information exists yet regarding the ideal coating parameter conditions that lead to higher surface integrity. For this reason, an optimization study is desired—a study on the parameters of CrN coating on aerospace Al7075-T6 alloy using physical vapor deposition magnetron sputtering. The present research work investigates the effects of temperature as well as nitrogen flow rate and DC power on coated samples’ surface hardness, adhesion, surface roughness, and microstructure. To carry out the investigation, the Taguchi optimization method with L16 (34) orthogonal array was applied. However, to obtain optimum parameters for superior surface integrity, signal/noise (S/N) response analysis method was employed. Finally, confirmation tests with the best parameter combinations attained in the optimization process were carried out to demonstrate the progress made. Ultimately, surface hardness of coated Al7075-T6 was enhanced by 15.33 %, adhesion by 24.3 %, and surface roughness by 7.22 %.

Keywords

Al7075-T6 alloy CrN coating PVD magnetron sputtering 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Lugscheider E, Krimer G, Barimani C, Zimmermann H (1995) PVD coatings on aluminum substrates. Surf Coat Technol 74–75:497–502CrossRefGoogle Scholar
  2. 2.
    Godja N, Kiss N, Löcker C, Schindel A, Gavrilovic A, Wosik J, Mann R, Wendrinsky J, Merstallinger A, Naure GE (2010) Preparation and characterization of spark-anodized Al-alloys: physical, chemical and tribological properties. Tribol Int 43:1253–1261CrossRefGoogle Scholar
  3. 3.
    Ortmann S, Savan A, Gerbig Y, Haefke H (2003) In-process structuring of CrN coatings, and its influence on friction in dry and lubricated sliding. Wear 254:1099–1105CrossRefGoogle Scholar
  4. 4.
    Zalnezhad E, Sarhan Ahmed AD, Hamdi M (2012) Optimizing the PVD TiN thin film coating’s parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. Int J Adv Manuf Technol 64(1–4):281–290Google Scholar
  5. 5.
    Zalnezhad E, Sarhan Ahmed AD, Hamdi M (2013) A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy. Int J Adv Manuf Technol 68(1–4):415–423CrossRefGoogle Scholar
  6. 6.
    Kelly PJ, Arnell RD (2000) Magnetron sputtering: a review of recent developments and applications. Vacuum 56:159–172CrossRefGoogle Scholar
  7. 7.
    Tan CW, Miao J (2009) Optimization of sputtered Cr/Au thin film for diaphragm-based MEMS applications. Thin Solid Films 517:4921–4925CrossRefGoogle Scholar
  8. 8.
    Zalnezhad E, Sarhan Ahmed AD, Hamdi M (2012) Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system. Int J Precis Eng Manuf 13(8):1453–1459CrossRefGoogle Scholar
  9. 9.
    Mubarak A, Hamzah E, Toff MRM (2006) Influence of nitrogen gas flow rate on the Microstructural and mechanical properties of TiN deposited carbon steel synthesized by CAE PVD technique. AJSTD 23(4):239–251CrossRefGoogle Scholar
  10. 10.
    Sarhan Ahmed AD, Zalnezhad E, Hamdi M (2013) The influence of higher surface hardness on fretting fatigue life of hard anodized aerospace AL7075-T6 alloy. Mat Sci Eng A-Struct 560:377–387CrossRefGoogle Scholar
  11. 11.
    Zalnezhad E, Sarhan Ahmed AD, Hamdi M (2013) Fretting fatigue life evaluation of multilayer Cr–CrN-coated Al7075-T6 with higher adhesion strength—fuzzy logic approach. Int J Adv Manuf Technol 69(5–8):1153–1164CrossRefGoogle Scholar
  12. 12.
    Logothetidis S, Alexandrou I, Kokkou S (1996) Optimization of TiN thin film growth with in situ monitoring: the effect of bias voltage and nitrogen flow rate. Surf Coat Technol 80:66–71CrossRefGoogle Scholar
  13. 13.
    Majzoobi GH, Hojjati R, Nematian M, Zalnejad E, Ahmadkhani AR, Hanifepoor E (2010) A new device for fretting fatigue testing. Trans Indian Inst Metals 63(2–3):493–497CrossRefGoogle Scholar
  14. 14.
    Chunyan Y, Linhai T, Yinghui W, Shebin W, Tianbao L, Bingshe X (2009) The effect of substrate bias voltages on impact resistance of CrAlN coatings deposited by modified ion beam enhanced magnetron sputtering. Appl Surf Sci 255:4033–4038CrossRefGoogle Scholar
  15. 15.
    Gangopadhyay S, Acharya R, Chattopadhyay AK, Paul S (2010) Effect of substrate bias voltage on structural and mechanical properties of pulsed DC magnetron sputtered TiN–MoSx composite coatings. Vacuum 84:843–850CrossRefGoogle Scholar
  16. 16.
    Zalnezhad E, Sarhan Ahmed AD (2014) A fuzzy logic predictive model for better surface roughness of Ti–TiN coating on AL7075-T6 alloy for longer fretting fatigue life. Measurement 49:256–265CrossRefGoogle Scholar
  17. 17.
    Sresomroeng B, Premanond V, Kaewtatip P, Khantachawana A, Kurosawa A, Koga N (2011) Performance of CrN radical nitrided tools on deep drawing of advanced high strength steel. Surf Coat Technol 205(17–18):4198–4204CrossRefGoogle Scholar
  18. 18.
    Zalnezhad E, Sarhan Ahmed AD, Jahanshahi P (2014) A new fretting fatigue testing machine design, utilizing rotating–bending principle approach. Int J Adv Manuf Technol 70(1–9):2211–2219CrossRefGoogle Scholar
  19. 19.
    Byrnes MLG, Grujicic M, Owen WS (1987) Nitrogenstrengthening of a stable austenitic stainless steel. Acta Metall 35:1853–1862CrossRefGoogle Scholar
  20. 20.
    Cai F, Huang X, Yang Q, Wei R, Nagy D (2010) Microstructure and tribological properties of CrN and CrSiCN coatings. Surf Coat Technol 205(1):182–188CrossRefGoogle Scholar
  21. 21.
    Conde A, Cristobal AB, Fuentes G, Tate T, Jde D (2006) Surface analysis of electrochemically stripped CrN coatings. Surf Coat Technol 201:3588–3595CrossRefGoogle Scholar
  22. 22.
    Bertrand G, Mahdjoub H, Meunier C (2000) A study of the corrosion behaviour and protective quality of sputtered chromium nitride coatings. Surf Coat Technol 126:199–209CrossRefGoogle Scholar
  23. 23.
    Zalnezhad E, Sarhan Ahmed AD, Hamdi M (2013) Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy. Mater Sci Eng A Struct 559:439–446CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London 2014

Authors and Affiliations

  1. 1.Department of Mechanical Engineering, Faculty of EngineeringUniversity of MalayaKuala LumpurMalaysia
  2. 2.Faculty of engineeringIslamic Azad UniversityChalous BranchIran
  3. 3.Department of Mechanical Engineering, Faculty of EngineeringAssiut UniversityAssiutEgypt

Personalised recommendations