Evolutionary topology optimization of continuum structures with stress constraints
- 109 Downloads
In this work, we propose to extend the bi-directional evolutionary structural optimization (BESO) method for compliance minimization design subject to both constraints on volume fraction and maximum von Mises stress. To this end, the aggregated p-norm global stress measure is first adopted to approximate the maximum stress. The conventional compliance design objective is augmented with p-norm stress measures by introducing one or multiple Lagrange multipliers. The Lagrange multipliers are employed to yield compromised designs of the compliance and the p-norm stress. An empirical scheme is developed for the determination of the Lagrange multipliers such that the maximum von Mises stress could be effectively constrained through the controlling of the aggregated p-norm stress. To further enforce the satisfaction of stress constraints, the stress norm parameter p is assigned to a higher value after attaining the objective volume. The update of the binary design variables lies in the computationally efficient sensitivity numbers derived using the adjoint method. A series of comparison studies has been conducted to validate the effectiveness of the method on several benchmark design problems.
KeywordsTopology optimization Stress constraint BESO Multiple constraints
This work is supported by the National Natural Science Foundation of China (51705165, 51405170, 51790171, 5171101743) and the Natural Science Foundation for Distinguished Young Scholars of Hubei province of China (2017CFA044).
- Duysinx P (1999) Topology optimization with different stress limits in tension and compression. Proceedings of the 3rd World Congress of Structural and Multidisciplinary Optimization WCSMO3Google Scholar
- Duysinx P, Sigmund O (1998) New development in handling stress constraints in optimal material distribution. In: Proc. 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization. A collection of technical papers (held in St. Louis, Missouri), 3:1501–1509Google Scholar