Advertisement

European Journal of Wood and Wood Products

, Volume 76, Issue 6, pp 1707–1713 | Cite as

Effect of the densification process on properties of commercial oriented strand boards

  • Priscila Carneiro dos Santos
  • Cláudio Henrique S. Del Menezzi
Original

Abstract

The objective of this work was to evaluate the effects of the densification on the physical and mechanical properties of OSB panels. A single-opening hot-press was used to perform the densification process. Four treatments were applied to densify the boards combining two temperatures (170 and 190 °C) and two pressures (25 and 50% of the compression strength perpendicular to the board plane). The properties of densified and undensified boards were assessed and the effect of temperature and pressure of the densification process was studied. It was found that undensified boards presented lower thickness swelling but higher water absorption and equilibrium moisture content than densified boards. Densified boards presented higher values of bending properties, parallel compression strength and hardness than undensified ones. The comparison within densified boards showed that in general the temperature was the most influential variable to modify the physical properties, while the mechanical properties were more affected by the pressure used. It can be concluded that the proposed densification process promoted remarkable changes on the OSB boards mainly regarding mechanical properties and water absorption. However, the thickness swelling remained as issue to be specially addressed in future works.

Notes

References

  1. Arruda LM, Del Menezzi CHS (2013) Effect of thermomechanical treatment on physical properties of wood veneers. Int Wood Prod J 4:217–224CrossRefGoogle Scholar
  2. Arruda LM, Gonçalez JC, Del Menezzi CHS, Melo RR (2011) Estudo preliminar das propriedades de compensados produzidos com lâminas de paricá (Schizolobium amazonicum Huber ex Ducke) modificadas termomecanicamente (Preliminary study of plywood produced with paricá (Schizolobium amazonicum Huber ex Ducke) veneers modified by thermo-mechanical treatment. Cienc Madeira 2:29–42Google Scholar
  3. Arruda LM, Del Menezzi CHS, Andrade A (2015) Utilization of a thermomechanical process to enhance properties of hardwood used for flooring. Cienc Madeira 6:223–231Google Scholar
  4. Arruda LM, Del Menezzi CHS (2016) Properties of a laminated wood composite produced with thermomechanically treated veneers. Adv Mater Sci Eng.  https://doi.org/10.1155/2016/8458065 CrossRefGoogle Scholar
  5. ASTM D1037-12 (2012) Standard test methods for evaluating properties of wood-base fiber and particle panel materials, ASTM International, West Conshohocken, PAGoogle Scholar
  6. ASTM D143-94 (2000) Standard test methods for small clear specimens of timber, ASTM International, West Conshohocken, PAGoogle Scholar
  7. Ates S, Kara HH, Olgun C, Ozkan OE (2017) Effects of heat treatment on some properties of MDF (medium-density fiberboard). Wood Mater Sci Technol 12:158–164CrossRefGoogle Scholar
  8. Bekhta P, Marutzky R (2007) Reduction of glue consumption in the plywood production by using previously compressed veneer. Holz Roh Werkst 65:87–88CrossRefGoogle Scholar
  9. Bekhta P, Niemz P, Sedliacik J (2012) Effect of pre-pressing of veneer on the glueability and properties of veneer-based Products. Eur J Wood Prod 70:99–106CrossRefGoogle Scholar
  10. Coelho MU, Del Menezzi CHS, Souza MR (2017) Abrasion resistance of Pinus wood subjected to thermomechanical treatments. Pro Ligno 13:94–100Google Scholar
  11. Costa MA, Del Menezzi CHS (2017) Effect of thermo-mechanical treatment on properties of paricá plywood (Schizolobium amazonicum Huber ex Ducke. Rev Arvore 41:e410115CrossRefGoogle Scholar
  12. Del Menezzi CHS, Tomaselli I (2006) Contact thermal post-treatment of oriented strandboard to improve dimensional stability: a preliminary study. Holz Roh Werkst 64:212–217CrossRefGoogle Scholar
  13. Del Menezzi CHS, Souza RQ, Thompson RM, Teixeira DE, Okino EYA, Costa AF (2008) Properties after weathering and decay resistance of a thermally wood structural board. Int Biodeter Biodegr 62:448–454CrossRefGoogle Scholar
  14. Del Menezzi CHS, Tomaselli I, Okino EYA, Teixeira DE, Santana MAE (2009) Thermal modification of consolidated oriented strandboards: effects on dimensional stability, mechanical properties, chemical composition and surface color. Eur J Wood Prod 67:383–396CrossRefGoogle Scholar
  15. Direske M, Bonigut J, Wenderdel C, Scheiding W, Krug D (2018) Effects of MDI content on properties of thermally treated oriented strand board (OSB). Eur J Wood Prod 76:823–831CrossRefGoogle Scholar
  16. Freitas CS, Gonçalez JC, Menezzi D, CHS (2016) Tratamento termomecânico e seus efeitos nas propriedades da Simarouba amara (Aubl.). Floresta Ambient 23:565–572CrossRefGoogle Scholar
  17. Missio AL, Mattos BD, De Cademartori PHG, Gatto DA (2016) Effects of two-step freezing-heat treatments on japanese raisintree (Hovenia dulcis Thunb.) wood properties. J Wood Chem Technol 36:16–26CrossRefGoogle Scholar
  18. Okino EYA, Teixeira DE, Del Menezzi CHS (2007) Post-thermal treatment of oriented strandboard made from cypress (Cupressus glauca Lam.). Maderas-Cienc Tecnol 9:199–210CrossRefGoogle Scholar
  19. Oliveira SL, Freire TP, Mendes LM, Mendes RF (2017) The effect of post-heat treatment in MDF panels. Mater Res-Ibero-Am J 20:183–190Google Scholar
  20. Santos CMT, Del Menezzi CHS, Souza MR (2012) Properties of thermo-mechanically treated wood from Pinus caribaea var. hondurensis. Bioresources 7:1850–1865CrossRefGoogle Scholar
  21. Welzbacher CR, Wehsener J, Rapp AO, Haller P (2008) Thermo-mechanical densification combined with thermal modification of Norway spruce (Picea abies Karst) in industrial scale - dimensional stability and durability Aspects. Holz Roh Werkst 66:39–49CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Priscila Carneiro dos Santos
    • 1
  • Cláudio Henrique S. Del Menezzi
    • 1
  1. 1.Department of Forest Engineering, Faculty of TechnologyUniversity of BrasíliaBrasíliaBrazil

Personalised recommendations