Advertisement

Ceramic Behaviour of Some Raw Materials from Ecuador

  • M. M. Jordan
  • F. Pardo
  • T. Sanfeliu
Raw Materials Worldwide
  • 1 Downloads

Abstract

This note is a preliminary study about the possibility of using local clays from Ecuador in industrial ceramics. The clays deposits studied were highly plastic raw materials with very high contents of quartz. The raw material in traditional ceramics in Ecuador is clay with approximate levels of silica at 60 mass-%, alumina 15 mass-%, low alkalis and carbonates, and high iron levels. The sample mineralogy indicates quartz as a primary mineral, followed by anorthite, with haematite to a lesser extent in all the samples. Kaolinite, illite and chlorite are the main clay minerals in the raw material samples. The studied clays seem to be easily adaptable to a correct dry pressing ceramic process. Another application would be the formulation of pastes for table pottery, decorative ceramics, ceramics for construction, and semi-refractory bricks.

Keywords

Ecuador clay deposits ceramics 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Cárdenas, J.L., Paredes, C.A., Pacheco, J.: La industria cerámica en el Ecuador. Revista Tecnológica, 16 (2003) 19–23Google Scholar
  2. [2]
    Meseguer, S., Sanfeliu, T., Jordan, M.M.: Classification and statistical analysis of mine spoils chemical composition from Oliete Basin (Teruel, NE Spain). Environmental Geology 56 (2009) 1461–1466CrossRefGoogle Scholar
  3. [3]
    Sanfeliu, T., Jordan, M.M.: Geological and environmental management of ceramic clay quarries: A review. Environmental Geology 57 (2009) 1613–1618CrossRefGoogle Scholar
  4. [4]
    Jeridi, K., Hachani, M., Hajjaji, W., Moussi, B., Medhioub, M., López-Galindo, A., Jordan, M.M., Boix, A., Sanfeliu, T., de la Fuente, C.: Firing transformations of Cretaceous clays used in the manufacturing of ceramic tiles. Appl. Clay Scie. 14 (1999) 225–234CrossRefGoogle Scholar
  5. [5]
    Cultrone, G., Sebastian. E., Elerk K., De la Torre, M.J., Cazalla, O., Rodriguez-Navarro, C.: Influence of mineralogy and firing temperature on the porosity of bricks. J. of the Europ. Ceramic Soc. 24 (2004) 547–564CrossRefGoogle Scholar
  6. [6]
    Daskshama, V., Mohan, B.V., Lalithambika, M., Nair, C.G.R.: Sintering studies on plastic clays. Ceramics Internat. 18 (1992) 359–364CrossRefGoogle Scholar
  7. [7]
    Jordan, M.M., Montero, M.A., Meseguer. S., Sanfeliu. T.: Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies. Appl. Clay Scie. 42 (2008) 266–271CrossRefGoogle Scholar
  8. [8]
    Carretero M.I., Dondi M., Fabbri B., Raimondo M.: The influence of shaping and firing technology on ceramic properties of calcareous and non-calcareous illitic-chloritic clays. Appl. Clay Scie. 20 (2002) 301–306CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2014

Authors and Affiliations

  1. 1.Department of Agrochemistry and EnvironmentUniversity Miguel HernándezELCHE AlicanteSpain
  2. 2.Unit of Applied Mineralogy, Department of Agrarian Sciences and EnvironmentUniversity Jaume ICastellónSpain

Personalised recommendations