This paper presents the investigation of influence factors on the output performance and the reduction of exhaust emission in the direct injection type diesel engine. In this work, the analysis of combustion products and combustion characteristics are investigated by numerical method and experiment under the various engine operating conditions. The combusion performance and exhaust emissions are analyzed in terms of the heat release, cylinder pressure and major exhaust emissions of engine. The accuracy of the prediction versus experimental data and the capability of the heat release, cylinder pressure and all the major exhaust emissions are demonstrated. The results of this study show that the combustion parameters have influence on the combustion processes and the nitric oxide emission in the direct injection type diesel engine. The nitric oxide concentration decreases with the increase of engine speed and the advance of injection timing.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Chang Sik Lee., 1987, “A Study on the Characteristics of Combustion Variations of Compression Ignition engine”,KSME Journal, Vol. 1, No. 1, pp. 18–23.
C. S. Lee, K. N. Kim and A. B. Rosli., 1991, “A Study on the Combustion Performance of Swirl Chamber Type Diesel Engine”,Proceeding Annual Conference of the Korea Society of Mechanical Engineers (KSME), pp. 263–266.
Fabio Bozza, Roberta Nocera, Adolfo Senatore and Raffaele Tuccillo., 1990, “Theoretical and Experimental Invetigation of the Matching Between an I. C. E and Turbocharger”,SAE paper 901601. pp. 1921–1932.
Hiroyuki Hiroyasu., 1985, “Diesel Engine Combustion and It's Modeling Proceeding of International Symposium on Diagnostics and Modeling of Combustion In Internal Combustion Engines”,COMODIA 85, pp. 53–75.
W. J. D. Annand., 1963, “Heat Transfer in the Cylinder of Reciprocating Internal Combustion Engine”,Proc. Inst. Mech. Eng., Vol. 177, pp. 973–990.
Rosli Abu Bakar and Chang Sik, Lee, 1995a, “A Computational Investigation of the Combustion Performance in Compressed Natural Gas (CNG) Engine”,Malaysia Science and Technology Congress 95 (MSTC 95).
Rosli Abu Bakar and Chang Sik Lee., 1995b, “Theoretical Study of Nitric Oxide Formation in the Diesel Engine”,Proceedings of The Eighth International Pacific Conference on Automative Engineering (IPC-8), pp. 105-109.
G. Woschi, 1967, “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in Internal Combustion Engine”,SAE paper 670931, pp. 3065–3083.
H. Hiroyasu and T. Kadota., 1976, “Model for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines”.SAE paper 760129, pp. 513–526.
Rosli Abu Bakar and Chang Sik Lee., 1996, “The influence of fuel properties on exhaust emission for direct injection Diesel Engine”.Proceedings of the International Conference of the International Association of Science and Technology for Development (IASTED 96)
Timothy P. Gardner and Naiem A. Henein., 1988, “Diesel Starting: A Mathematical Model”,SAE paper 880426, pp. 728–740.
David E., Foster., 1985, “An Overview of Zero Dimensional Thermodynamics Model for IC Ehgine Data Analysis”.SAE paper 852070. pp. 1-14.
Steven L. Plee and Tanvir Ahmad., 1983, “Relative Roles of Premixed and Diffusion Burning in Diesel Combustion”,SAE pape 831733, pp. 892–909.
N. Watson., 1984, “Dynamic Turbocharged Diesel Engine Simulator for Electronic Control System Development”,ASME, Vol. 106, pp. 27–45.
M. Tsukahara, Y. Yoshimoto and T. Murayama., 1989. “W/O Emulasion Realizes Low Smoke and Efficient Operation of DI Engines without High Pressure Injection”,SAE paper 890449, pp. 777–783.
About this article
Cite this article
Bakar, R.A., Lee, C.S. The effect of combustion parameters on the nitric oxide emission in direct injection type diesel engine. KSME International Journal 11, 672–680 (1997). https://doi.org/10.1007/BF02946338
- Fuel Properties
- Combustion Characteristics
- Exhaust Emission
- Combustion Simulation