Springer Nature is making SARS-CoV-2 and COVID-19 research free. View research | View latest news | Sign up for updates

Features of elastoplastic deformation and fracture of hardened isotropic metals in a complex stress state (review)

  • 24 Accesses

  • 2 Citations

This is a preview of subscription content, log in to check access.

Literature cited

  1. 1.

    V. N. Bastun and A. M. Tonkonozhenko, "A method of determining stresses in structures," Pub. B. I., No. 23, 118 (1983).

  2. 2.

    V. N. Bastun, A. A. Kaminskii, and S. V. Karpov, "A method of determining stresses in structures," Pub. B. I., No. 47, 126 (1985).

  3. 3.

    L. S. Andreev, "Plastic deformation of metals with biaxial tension," Inzh. Zh., No. 2, 150–157 (1962).

  4. 4.

    E. K. Ashkenazi and É. V. Ganov, Anisotropy of Construction Materials [in Russian], Mashinostroenie, Leningrad (1972).

  5. 5.

    V. N. Bastun, "Verification of hypotheses of the theory of small elastoplastic deformations at high temperatures," in: Thermal Stresses in Structural Elements [in Russian], Naukova Dumka, Kiev (1974), pp. 24–27.

  6. 6.

    V. N. Bastun, "The study of surface loading by carbon steels during plastic deformation," Probl. Prochn., No. 4, 23–26 (1976).

  7. 7.

    V. N. Bastun, "The plasticity condition of anisotropic bodies," Prikl. Mekh.,13, No. 1, 104–109 (1977).

  8. 8.

    V. N. Bastun, "Deformation hardening of initially anisotropic metals by loading along rectilinear trajectories," in: Stability of Materials and Structural Elements in a Complex Stress State [in Russian], Naukova Dumka, Kiev (1978), pp. 161–171.

  9. 9.

    V. N. Bastun, "A study of the hardening law of initially isotropic materials," Prikl. Mekh.,17, No. 4, 51–57 (1981).

  10. 10.

    V. N. Bastun, "Solution of the genesis problem of deformation anisotropy in metals during simple loading," Prikl. Mekh.,20, No. 4, 82–88 (1984).

  11. 11.

    V. N. Bastun, "Nondestructive control of the stress-strain state of structural elements on the basis of solving the genesis problem of deformation anisotropy," Prikl. Mekh.,25, No. 3, 58–64 (1989).

  12. 12.

    V. N. Bastun, G. V. Galatenko, and V. A. Markov, "Estimation of stability of circular cylindrical shells weakened by a longitudinal crack during static loading by an axial force and internal pressure," in: Proc. III All-Union Symp. Stability of Materials and Structural Elements in a Complex Stress State [in Russian], Inst. Stab. Probl., Ukr. Acad. Sci., Kiev (1989), p. 16.

  13. 13.

    V. N. Bastun and T. Ya. Gervits, "Study of the features of deformation hardening of steel N18K8M5T as a function of phase composition," Probl. Prochn., No. 1, 14–18 (1985).

  14. 14.

    V. N. Bastun, T.Ya. Gervits, and S. B. Nizhnik, "Construction of deformation diagrams of structurally unstable aging materials," Prikl. Mekh.,18, No. 3, 71–76 (1982).

  15. 15.

    V. N. Bastun and A. M. Tonkonozhenko, "Determination of the stress value by means of stability gauges," Zavod. Lab., No. 53, 81–82 (1986).

  16. 16.

    V. N. Bastun and N. I. Chernyak, "Validity of the stability hypothesis in the region of small plastic deformations," Prikl. Mekh.,9, No. 12, 53–57 (1973).

  17. 17.

    V. N. Bastun and L. M. Shkaraputa, "Study of deformation features of initially isotropic materials during active loading along two-branch trajectories," in: Stability of Materials and Structural Elements in a Complex Stress State [in Russian], Naukova Dumka, Kiev (1986), pp. 28–32.

  18. 18.

    V. N. Bastun and L. M. Shkaraputa, "Determination of the relations between stresses and strain during complex loading processes on the basis of accounting for deformation hardening," Probl. Prochn., No. 6, 49–54 (1987).

  19. 19.

    P. H. Bridgman, Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York (1952).

  20. 20.

    R. A. Vasin, "The relations between stress and strain during complex loading," in: Elasticity and Inelasticity [in Russian], Moscow Univ. (1971), pp. 59–126.

  21. 21.

    D. A. Gavrilov, "Application of one-dimensional functions to describing the nonlinear dependence between the stress and strain deviators," Dokl. Akad. Nauk UkrSSR, Ser. A, No. 8, 696–699 (1978).

  22. 22.

    G. V. Galatenko, "A generalized model of a Dugdale crack," Prikl. Mekh.,25, No. 3, 53–58 (1989).

  23. 23.

    G. V. Galatenko, "Development of the Dugdale crack model on the basis of classical fluidity surfaces," Prikl. Mekh.,25, No. 6, 36–42 (1989).

  24. 24.

    G. V. Galatenko, O. S. Degtyareva, and A. A. Kaminskii, "Elastoplastic fracture of orthotropic plates with cracks during biaxial loading," Prikl. Mekh.,26, No. 8, 93–99 (1990).

  25. 25.

    I. I. Gol'denblat and V. A. Kopnov, Stability and Plasticity Criteria of Structural Elements [in Russian], Mashinostroenie, Moscow (1968).

  26. 26.

    A. N. Guz', Mechanics of Brittle Fracture of Materials with Initial Stresses [in Russian], Naukova Dumka, Kiev (1983).

  27. 27.

    V. L. Danilov, "Variations in surface fluidity during a deformation processes," Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 4, 10–16 (1972).

  28. 28.

    V. P. Degtyarev, Plasticity and Creep of Machine-Constructed Structures [in Russian], Mashinostroenie, Moscow (1967).

  29. 29.

    V. P. Degtyarev, Deformation and Fracture in High-Stress Structures [in Russian], Mashinostroenie, Moscow (1987).

  30. 30.

    E. A. Davis, "Fluidity and fracture of steel in a medium containing carbon in a complex stress state," in: Theory of Plasticity [Russian translation], IL, Moscow (1948), pp. 364–374.

  31. 31.

    E. A. Davis, "Stress growth with varying strain, and the ‘stress-strain’ dependence in the plastic region for copper in a complex stress state," in: Theory of Plasticity [Russian translation], IL, Moscow (1948), pp. 336–363.

  32. 32.

    T. Ekobori, Physics and Mechanics of Fracture and Stability of Solids [in Russian], Metallurgiya, Moscow (1971).

  33. 33.

    T. Ekobori, The Scientific Basis of Stability and Fracture of Materials [in Russian], Naukova Dumka, Kiev (1978).

  34. 34.

    A. M. Zhukov, "The Poisson coefficient in the plastic regime," Izv. Akad. Nauk SSR, Ser. Otd. Tekh. Nauk, No. 12, 86–91 (1954).

  35. 35.

    A. M. Zhukov, "Plastic properties and fracture of steels in the biaxial stress state," Inzh. Sb., No. 29, 37–48 (1954).

  36. 36.

    A. M. Zhukov, "Complex loading in plasticity theory of isotropic metals," Izv. Akad. Nauk SSSR, Ser. Otd. Tekh. Nauk, 81–92 (1955).

  37. 37.

    A. M. Zhukov, "Plastic deformations of an isotropic metal with complex loading," Izv. Akad. Nauk SSSR, Ser. Otd. Tekh. Nauk, No. 12, 72–87 (1956).

  38. 38.

    V. G. Zubchaninov, Foundations of the Theory of Elasticity and Plasticity [in Russian], Vyssh. Shkola, Moscow (1990).

  39. 39.

    A. A. Il'yushin, Plasticity [in Russian], Gostekhizdat, Moscow (1948).

  40. 40.

    A. A. Il'yushin, Plasticity — Foundations of the General Mathematical Theory [in Russian], Izd-vo Akad. Nauk SSSR, Moscow (1963).

  41. 41.

    Yu.N. Shevchenko, M. E. Babeshko, R. G. Terekhov, et al., "The study of processes of complex-loaded metals with intermediate unloading along arbitrary planar trajectories," in: Stability of Materials and Structural Elements in a Complex Stress State [in Russian], Naukova Dumka, Kiev (1986), pp. 246–254.

  42. 42.

    Yu. I. Kadashevich and V. V. Novozhilov, "Theory of plasticity, including residual microstresses," Prikl. Mat. Mekh.,22, No. 1, 78–89 (1958).

  43. 43.

    A. A. Kaminskii, Mechanics of Fracture of Viscoelastic Bodies [in Russian], Naukova Dumka, Kiev (1980).

  44. 44.

    A. A. Kaminskii, Fracture of Viscoelastic Bodies with Cracks — Nonclassical Problems of Mechanical Fracture [in Russian], Naukova Dumka, Kiev (1990).

  45. 45.

    A. A. Kaminskii and V. N. Bastun, Deformation Hardening and Fracture of Metals in Varying Loading Processes [in Russian], Naukova Dumka, Kiev (1985).

  46. 46.

    A. A. Kaminskii, V. N. Bastun, and S. V. Karpov, "Methods of estimating the stress — strain state of gas pipes in use," Visn. Akad. Nauk URSR, No. 11, 62–67 (1985).

  47. 47.

    L. M. Kachanov, Foundations of Fracture Mechanics [in Russian], Nauka, Moscow (1974).

  48. 48.

    Yu. N. Shevchenko, V. G. Savchenko, R. G. Terekhov, and A. I. Borisyuk, "The problem of applying the theory of small elastoplastic deformations to calculating the stress state of bodies with finite deformations," Probl. Proch., No. 6, 3–6 (1972).

  49. 49.

    B. I. Kovalsh'chuk, N. M. Kul'chitskii, and A. A. Lebedev, "Plasticity and stability of primarily deformed chromium steel with biaxial tension under conditions of low temperature," Probl. Prochn., No. 10, 23–26 (1978).

  50. 50.

    B. I. Kovalsh'chuk, A. A. Lebedev, and I. B. Makovetskii, "Experimental investigations of the surface fluidity of deformed carbonated steel over a wide temperature range," Probl. Prochn., No. 9, 3–7 (1980).

  51. 51.

    B. I. Kovalsh'chuk, A. A. Lebedev, and S. É. Umanskii, Mechanics of Inelastic Deformation of Materials and Structural Elements [in Russian], Naukova Dumka, Kiev (1987).

  52. 52.

    A. Ya. Krasovskii, Physical Foundations of Stability [in Russian], Naukova Dumka, Kiev (1977).

  53. 53.

    A. Ya. Krasovskii and V. N. Krasiko, Crack Stability of Steel in Main Line Pipes [in Russian], Naukova Dumka, Kiev (1990).

  54. 54.

    V. A. Kuz'menko, New Schemes of Deformation of Solids [in Russian], Naukova Dumka, Kiev (1973).

  55. 55.

    A. A. Lebedev, "Deformation hardening of structural steels at low temperatures," Probl. Prochn., No. 10, 57–60 (1980).

  56. 56.

    V. S. Lenskii, "Experimental investigation of the basic postulates of the general theory of elastoplastic deformations," in: Problems of Plasticity Theory [in Russian], Izd-vo Akad. Nauk SSSR, Moscow (1961), pp. 58–62.

  57. 57.

    F. A. McClintock and A. S. Argon (eds.), Mechanical Behavior of Materials, Addison-Wesley, MA (1966).

  58. 58.

    N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1975).

  59. 59.

    A. A. Kaminskii, V. N. Bastun, S. V. Karpov, et al., "A control method of the stress — strain state of main line gas pipes by means of observation plates," Izd-vo VNIIgaza, Moscow (1987).

  60. 60.

    A. A. Lebedev, B. I. Kovalsh'chuk, F. F. Giginyak, and V. P. Lamashevskii, Mechanical Properties of Structural Materials in a Complex Stress State — Handbook [in Russian], Naukova Dumka, Kiev (1983).

  61. 61.

    V. V. Panasyuk (ed.), Mechanics of Fracture and Stability of Materials (Reference Text Book), in 4 volumes [in Russian], Naukova Dumka, Kiev (1988).

  62. 62.

    M. Misheneat and V. Findley, "Analysis of successive fluidity surfaces for annealed slightly carbonated steel under conditions of regular deformations and loads with account of aging, normalcy, curvature, formation of conical points, the Bauschinger effect, and the transverse effect," Tr. Amer. Inzh. Mekh., Ser. D, No. 1, 26–40 (1975).

  63. 63.

    N. M. Mitrokhin and Yu. I. Yagi, "The systematic nature of deviations from the laws of plasticity," Dokl. Akad. Nauk SSSR, No. 4, 140 (1960).

  64. 64.

    V. P. Naumenko, "Brittle fracture and stability of materials under compression and tension," Inst. of Stability Problems, Kiev (1987).

  65. 65.

    P. Okhashi, M. Tokuda, I. Kurita, et al., "Several experimental data on the general law of Il'yushin plasticity," Izv. Akad. Nauk SSSR, Ser. Mekh. Tverd. Tela, No. 6, 53–64.

  66. 66.

    V. Z. Parton and E. M. Morozov, Mechanics of Elastoplastic Fracture [in Russian], Nauka, Moscow (1974).

  67. 67.

    G. S. Pisarenko and A. A. Lebedev, Deformation and Stability of Materials in a Complex Stress State [in Russian], Naukova Dumka, Kiev (1976).

  68. 68.

    G. S. Pisarenko and N. S. Mozharovskii, Equations and Boundary Value Problems of Plasticity and Creep Theory (Reference Text Book) [in Russian], Naukova Dumka, Kiev (1981).

  69. 69.

    G. S. Pisarenko, V. P. Naumenko, and E. E. Onishchenko, "Elastoplastic fracture by cleavage of steel sheets with biaxial loads," Inst. of Stability Problems, Kiev (1983).

  70. 70.

    V. Prager "Hardening of a metal in a complex stress state," in: Theory of Plasticity [Russian translation], IL, Moscow (1948), pp. 325–335.

  71. 71.

    Yu. N. Shevchenko, S. V. Kulakov, V. N. Bastun, and R. G. Terekhov, "Applicability of several plasticity theories to the description of repeated loading processes along different rectilinear trajectories," Probl. Proch., No. 6, 48–52 (1980).

  72. 72.

    G. Libovits (ed.), Fracture [in Russian], Mashinostroenie, Moscow (1977), in 7 volumes.

  73. 73.

    S. I. Ratner, Stability and Plasticity of Metals [in Russian], Oborogiz, Moscow (1949).

  74. 74.

    A. A. Kaminskii, V. N. Bastun, S. V. Karpov, et al., "Recommendations on estimating the stress-strain state of gas pipes by means of observation plates," Izd-vo VNIIgaza, Moscow (1986).

  75. 75.

    A. A. Kaminskii, V. N. Bastun, S. V. Karpov, et al., "Control of the stress-strain state of gas pipes by means of observation plates," Izd-vo VNIIgaza, Moscow (1987).

  76. 76.

    L. M. Slepyan, Mechanics of Cracks [in Russian], Sudostroenie, Leningrad (1981).

  77. 77.

    B. Dalya and V. Anton (eds.), Static Stability and Fracture Mechanics of Steel [in Russian], Metallurgiya, Moscow (1986).

  78. 78.

    G. B. Talypov, Plasticity and Stability of Steel under Complex Loading [in Russian], Izd-vo Leningr. Univ., Leningrad (1968).

  79. 79.

    V. M. Finkel', Physics of Brittle Fracture [in Russian], Metallurgiya, Moscow (1970).

  80. 80.

    R. V. Khertsberg, Deformation and Fracture Mechanics of Structural Materials [in Russian], Metallurgiya, Moscow (1989).

  81. 81.

    S. A. Khristianovich, "Deformation hardening of a plastic material," Preprint USSR Academy of Sciences, Institute of Problems in Mechanics, Moscow (1973).

  82. 82.

    N. I. Chernyak, Mechanical Properties of Steel in the Region of Small Plastic Deformations [in Russian], Izd-vo Akad. Nauk UkrSSR, Kiev (1962).

  83. 83.

    G. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Nauka, Moscow (1974).

  84. 84.

    Yu. N. Shevchenko, Thermoplasticity with Varying Loads [in Russian], Naukova Dumka, Kiev (1970).

  85. 85.

    Yu. N. Shevchenko and V. N. Bastun, "Construction of the dependences between stress and strain with account of the hardening anisotropy of the material," Prikl. Mekh.,14, No. 6, 3–8 (1978).

  86. 86.

    Yu. N. Shevchenko and R. G. Terekhov, The Physical Equations of Thermoviscoplasticity [in Russian], Naukova Dumka, Kiev (1982).

  87. 87.

    A. A. Shestakov, I. S. Khretinin, and I. A. Borisenko, "Viscous fracture of pipes," in: New Methods of Mounting Main Line Pipes [in Russian], Mingazprom SSSR, Moscow (1990), pp. 17–22.

  88. 88.

    O. A. Shishmarev, "Effect of the shape of the stress deviator on plastic deformation of steel," Inzh. Zh. Ser. Mekh. Tverd. Tela, No. 5, 112–118 (1966).

  89. 89.

    Yu. I. Yagi and I. A. Chaplinskii, "The resistance of metals to plastic deformation," Dokl. Akad. Nauk SSSR, No. 6, 1023–1026 (1953).

  90. 90.

    G. H. Daneshi, "An analysis of the yield criterion and the stress-strain relationships of a prestrained commercially pure aluminum," Mech. Eng. Sci.,20, No. 4, 169–175 (1978).

  91. 91.

    E. A. Davis, "Combined tension-torsion test with fixed principal directions," J. Appl. Mech.,22, No. 3, 411–417 (1955).

  92. 92.

    E. S. Folias, "On the theory of fracture of curved shells," Eng. Fract. Mech., No. 2, 151–164 (1970).

  93. 93.

    W. M. Mair and H. J. Pugh, "Effect of prestrain on yield surfaces in copper," J. Mech. Eng. Sci.,6, No. 2, 150–163 (1964).

  94. 94.

    J. Marin and J. Sayer, "Plastic stress-strain relations under radial and nonradial combined stress loading," J. Franklin Inst.,256, No. 2, 106–110 (1953).

  95. 95.

    Y. Ohashi, K. Kawashima, and N. Mori, "Plastic behaviour of an aluminum alloy subjected to proportional loadings," Bull. JSME,19, No. 133, 823–826 (1976).

  96. 96.

    Y. Ohashi, K. Kawashima, and S. Nagashiko, "Precise experimental results and analytical formulation of the subsequent plastic deformation of mild steel subjected to prestraining," Bull. JSME,18, No. 125, 1218–1225 (1975).

  97. 97.

    A. Phillips, "Experimental plasticity — some thoughts on the present status and possible future trends," J. Mech. Plast. Solids, No. 2, 193–231.

  98. 98.

    E. Shiratori and K. Jlegami, "Experimental study of the subsequent yield surface by using cross-shaped specimens," J. Mech. Phys. Solids, No. 16, 373–394 (1968).

  99. 99.

    H. Ziegler, "A modification of Prager's hardening rule," Quart. Appl. Math.,176, 55–65 (1959).

  100. 100.

    M. Zyczkowski, Combined Loading in the Theory of Plasticity [in Polish], Polish Scientific Publishers, Warsaw (1973).

  101. 101.

    M. Zyczkowski, Combined Loading in the Theory of Plasticity Polish Scientific Publishers, Warsaw (1973).

Download references

Additional information

Institute of Mechanics, Ukrainian Academy of Sciences, Kiev. Translated from Prikladnaya Mekhanika, Vol. 29, No. 3, pp. 3–23, March, 1993.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Kaminskii, A.A., Bastun, V.N. Features of elastoplastic deformation and fracture of hardened isotropic metals in a complex stress state (review). Int Appl Mech 29, 171–189 (1993). https://doi.org/10.1007/BF00846994

Download citation

Keywords

  • Stress State
  • Complex Stress
  • Elastoplastic Deformation
  • Complex Stress State
  • Isotropic Metal