Advertisement

Journal of Materials Science

, Volume 31, Issue 10, pp 2599–2602 | Cite as

Preparation of barium titanate ultrafine particles from amorphous titania by a hydrothermal method and specific dielectric constants of sintered discs of the prepared particles

  • H. Kumazawa
  • T. Kagimoto
  • A. Kawabata
Papers

Abstract

Barium titanate ultrafine particles were synthesized from amorphous titania by a hydrothermal method. The mean size of the barium titanate particles prepared at a hydrothermal treatment time of 4 h, was nearly equal to 0.04 5 μm in the range of barium-to-titanium molar ratio (BT) ⩾ 2, and approximately agreed well with the crystallite size. At a BT molar ratio of 1.0, the mean particle size increased to 0.2 μm, while the crystallite size remained constant at 0.045 μm. When the particle size ranged from 0.12–0.20 μm, prepared for the BT molar ratio of 1.0–1.4, the specific dielectric constant for a sintered disc composed of these particles attained a value of 5000 or more. As the BT molar ratio increased to exceed 1.5, when the mean particle size decreased from 0.13 μm to 0.045 μm, the specific dielectric constant for the sintered disc was decreased greatly. The specific dielectric constant for the sintered disc can be correlated well with the size of the composing particles.

Keywords

Polymer Particle Size Titania Titanate Dielectric Constant 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    H. KUMAZAWA, S. ANNEN and E. SADA,J. Mater. Sci. 30 (1995) 4740.CrossRefGoogle Scholar
  2. 2.
    E. SADA, H. KUMAZAWA and H.-M. CHO,Ind. Eng. Chem. Res. 30 (1991) 1319.CrossRefGoogle Scholar
  3. 3.
    H. KUMAZAWA, H. OTSUKI and E. SADA,J. Mater. Sci. Lett. 12 (1993) 839.CrossRefGoogle Scholar
  4. 4.
    H. P. KLUG and L. E. ALEXANDER, “X-Ray Diffraction Procedures” (Wiley, New York, 1974) p. 618.Google Scholar

Copyright information

© Chapman & Hall 1996

Authors and Affiliations

  • H. Kumazawa
    • 1
  • T. Kagimoto
    • 1
  • A. Kawabata
    • 1
  1. 1.Department of Chemical EngineeringKyoto UniversityKyotoJapan

Personalised recommendations