Advertisement

Journal of Materials Science

, Volume 27, Issue 14, pp 3843–3855 | Cite as

Interfacial properties of fibre-reinforced composites

  • C. Y. Yue
  • W. L. Cheung
Papers

Abstract

Factors which control the strength and toughness of a fibre-reinforced composite in terms of the role of interfacial parameters such as the interfacial shear strength, the interfacial coefficient of friction and the matrix shrinkage pressure are reviewed. Techniques for determining the interfacial parameters, the stress distribution along the embedded fibre, and the mode of failure of the pull-out tests utilized in these techniques are considered.

Keywords

Polymer Shrinkage Shear Strength Stress Distribution Interfacial Shear 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J. Bowyer and M. G. Bader, J. Mater. Sci. 7 (1972) 1315.CrossRefGoogle Scholar
  2. 2.
    M. G. Bader and W. H. Bowyer, Composites 7 (1973) 150.CrossRefGoogle Scholar
  3. 3.
    P. T. Curtis, M. G. Bader and J. E. Bailey, J. Mater. Sci. 13 (1978) 377.CrossRefGoogle Scholar
  4. 4.
    P. E. Chen, Polym. Eng. Sci. 11 (1971) 51.CrossRefGoogle Scholar
  5. 5.
    V. R. Riley and J. L. Reddaway, J. Mater. Sci. 3 (1968) 41.CrossRefGoogle Scholar
  6. 6.
    R. E. Lavengood, Polym. Eng. Sci. 12 (1972) 48.CrossRefGoogle Scholar
  7. 7.
    B. F. Blumentrit, B. T. Vu and S. L. Cooper, ibid. 15 (1975) 428.CrossRefGoogle Scholar
  8. 8.
    M. G. Bader and W. H. Bowyer, J. Phys. D: Appl. Phys. 5 (1972) 2215.CrossRefGoogle Scholar
  9. 9.
    A. Kelly, Proc. R. Soc. A282 (1964) 63.Google Scholar
  10. 10.
    D. C. Phillips and A. S. Tetelman, Composites 3 (1972) 216.CrossRefGoogle Scholar
  11. 11.
    D. H. Kaelble, J. Adhesion 5 (1973) 245.CrossRefGoogle Scholar
  12. 12.
    J. N. Kirk, M. Munro and P. W. R. Beaumont, J. Mater. Sci. 13 (1978) 2197.CrossRefGoogle Scholar
  13. 13.
    A. H. Cottrell, Proc. R. Soc. A282 (1964) 2.Google Scholar
  14. 14.
    A. Kelly, ibid. A319 (1970) 95.CrossRefGoogle Scholar
  15. 15.
    J. O. Outwater and M. C. Murphy, in Proceedings of 24th ANTECH, New York, 1969 (SPI, New York, 1969) Paper 11C.Google Scholar
  16. 16.
    A. G. Atkins, J. Mater. Sci. 10 (1975) 819.CrossRefGoogle Scholar
  17. 17.
    J. Cook and J. E. Gordon, Proc. R. Soc. A282 (1964) 508.Google Scholar
  18. 18.
    N. H. Sung, T. J. Jones and N. P. Suh, J. Mater. Sci. 12 (1977) 239.CrossRefGoogle Scholar
  19. 19.
    R. S. Millman and J. G. Morley, Mater. Sci. Engng 23 (1976) 1.CrossRefGoogle Scholar
  20. 20.
    L. J. Broutman, Polym. Eng. Sci. 6 (1966) 1.CrossRefGoogle Scholar
  21. 21.
    N. L. Hancox, J. Mater. Sci. 10 (1975) 234.CrossRefGoogle Scholar
  22. 22.
    M. G. Bader and J. F. Collins, in Proceedings of ICCM4, Tokyo, 1982 (Japan Society of Metals, Tokyo, 1982) p. 1067.Google Scholar
  23. 23.
    A. R. Sanadi and M. R. Piggott, J. Mater. Sci. 20 (1985) 421.CrossRefGoogle Scholar
  24. 24.
    H. Ishikawa, T. W. Chou and M. Taya, ibid. 17 (1982) 832.CrossRefGoogle Scholar
  25. 25.
    G. A. Cooper and A. Kelly, in “Interfaces in Composites”, ASTM STP 452 (American Society for Testing and Materials, Philadelphia, 1969) p. 90.CrossRefGoogle Scholar
  26. 26.
    B. Harris, J. Morley and D. C. Phillips, J. Mater. Sci. 10 (1975) 2050.CrossRefGoogle Scholar
  27. 27.
    B. Harris and A. O. Ankara, Proc. R. Soc. A359 (1978) 251.Google Scholar
  28. 28.
    R. K. Mittal and V. B. Gupta, J. Mater. Sci. 17 (1982) 3179.CrossRefGoogle Scholar
  29. 29.
    A. Kelly and W. R. Tyson, J. Mech. Phys. Solids 13 (1965) 329.CrossRefGoogle Scholar
  30. 30.
    W. R. Tyson and G. Davis, Br. J. Appl. Phys. 10 (1963) 199.Google Scholar
  31. 31.
    D. M. Schuster and E. Scala, American Institute of Aeronautics and Astronautics J. 6 (1968) 527.CrossRefGoogle Scholar
  32. 32.
    C. Y. Yue and W. L. Cheung, J. Mater. Sci. in press.Google Scholar
  33. 33.
    A. Kelly and G. J. Davies, Metall. Rev. 10 (1965) 199.Google Scholar
  34. 34.
    L. T. Drazl, M. J. Rich, M. F. Koenig and P. A. Lloyd, J. Adhesion 16 (1983) 133.CrossRefGoogle Scholar
  35. 35.
    H. L. Cox, Br. J. Appl. Phys. 3 (1952) 72.CrossRefGoogle Scholar
  36. 36.
    W. Sachse, Mater. Sci. Engng A126 (1990) 133.CrossRefGoogle Scholar
  37. 37.
    N. J. Parratt, Rubb. Plast. Age 41 (1960) 263.Google Scholar
  38. 38.
    M. J. Folkes, in “Short Fibre Reinforced Thermoplastics” (Studies Press, London, 1982) p. 20.Google Scholar
  39. 39.
    A. N. Netravali, L. T. T. Topoleski, W. Sachse and S. L. Phoenix, Compos. Sci. Techn. 35 (1989) 13.CrossRefGoogle Scholar
  40. 40.
    M. G. Bader and D. A. Clarke, in Proceedings of 3rd European Conference on Composite Materials (ECCM-3), Bordeaux, March 1989, edited by A. R. Bunsell and A. R. Lamicq (Elsevier Applied Science, London, 1989) p. 79.Google Scholar
  41. 41.
    I. Verpost, M. Desaeger and R. Keunings, in Proceedings of 3rd International Conference on Composite Interfaces (ICCI-III), Cleveland, May 1990, edited by H. Ishida (Elsevier Applied Science, New York, 1990) p. 653.Google Scholar
  42. 42.
    J. F. Mandell, J. H. Chen and F. J. McGarry, Int. J. Adhesion & Adhesives 1 (1980) 40.CrossRefGoogle Scholar
  43. 43.
    D. H. Grande, J. F. Mandell and K. C. C. Hong, J. Mater. Sci. 23 (1988) 311.CrossRefGoogle Scholar
  44. 44.
    D. L. Caldwell, D. A. Babbington and C. F. Johnson, in “Interfacial Phenomena in Composite Materials '89”, edited by F. R. Jones (Butterworths, London, 1989) p. 44.Google Scholar
  45. 45.
    A. N. Netravali, D. Stone, S. Ruoff and L. T. T. Topoleski, Compos. Sci. Techn. 34 (1989) 289.CrossRefGoogle Scholar
  46. 46.
    D. W. Nicholson, D. I. Livingston and G. S. F. Russell, Tire Sci. Techn. 6 (1978) 114.CrossRefGoogle Scholar
  47. 47.
    G. S. F. Russell, D. I. Livingston and D. W. Nicholson, Rubb. Chem. Techn. 53 (1980) 950.CrossRefGoogle Scholar
  48. 48.
    A. N. Gent, G. S. Fielding-Russell, D. I. Livingston and D. W. Nicholson, J. Mater. Sci. 16 (1981) 949.CrossRefGoogle Scholar
  49. 49.
    R. C. DeVekey and A. J. Majumdar, Mag. Concr. Res. 20 (1968) 229.CrossRefGoogle Scholar
  50. 50.
    D. J. Pinchin and D. Tabor, J. Mater. Sci. 13 (1978) 1261.CrossRefGoogle Scholar
  51. 51.
    R. J. Gray, ibid. 19 (1984) 1680.CrossRefGoogle Scholar
  52. 52.
    R. Bartos, ibid. 15 (1980) 3122.CrossRefGoogle Scholar
  53. 53.
    P. L. Walton and A. J. Majumdar, Composites 6 (1975) 209.CrossRefGoogle Scholar
  54. 54.
    P. B. Bowden, J. Mater. Sci. 5 (1970) 517.CrossRefGoogle Scholar
  55. 55.
    N. Hadjis and M. R. Piggott, ibid. 12 (1977) 358.CrossRefGoogle Scholar
  56. 56.
    J. Bowling and G. W. Groves, ibid. 14 (1979) 431.CrossRefGoogle Scholar
  57. 57.
    P. S. Chua and M. R. Piggott, Compos. Sci. Techn. 22 (1985) 107.CrossRefGoogle Scholar
  58. 58.
    C. Y. Yue and W. L. Cheung, in Proceedings of 7th International Conference on Deformation, Yield and Fracture of Polymers, Cambridge, April 1988 (Plastics and Rubber Institute, London, 1988) p. 84.1.Google Scholar
  59. 59.
    B. Miller, P. Muri and L. Rebenfeld, Compos. Sci. Techn. 28 (1987) 17.CrossRefGoogle Scholar
  60. 60.
    M. R. Piggott, Polym. Compos. 8 (1987) 291.CrossRefGoogle Scholar
  61. 61.
    P. S. Chua and M. R. Piggott, Compos. Sci. Techn. 22 (1985) 185.CrossRefGoogle Scholar
  62. 62.
    W. V. Titow and B. J. Lanham, in “Reinforced Thermoplastics”, (Applied Science, London, 1975) p. 5.Google Scholar
  63. 63.
    B. Cunningham, J. P. Sargent and H. K. G. Ashbee, J. Mater. Sci. 16 (1981) 620.CrossRefGoogle Scholar
  64. 64.
    J. P. Favre, in “Interfacial Phenomena in Composite Materials '89”, edited by F. R. Jones (Butterworths, London, 1989) p. 7.Google Scholar
  65. 65.
    U. Gaur and B. Miller, Compos. Sci. Techn. 34 (1989) 35.CrossRefGoogle Scholar
  66. 66.
    G. S. Holister, in “Fibre Reinforced Materials” (Elsevier, London, 1966) p. 19.Google Scholar
  67. 67.
    J. Outwater and J. Ogden, Mod. Plast. (1956) 56.Google Scholar
  68. 68.
    N. F. Dow, in GEC Missile and Space Division Report No. R63SD61 (GEC Interim Report, 1963).Google Scholar
  69. 69.
    B. W. Rosen, in “Fibre Composite Materials” (ASM, Metals Park, Ohio, 1964) Ch. 3.Google Scholar
  70. 70.
    M. R. Piggott, Acta Metall. 14 (1966) 1429.CrossRefGoogle Scholar
  71. 71.
    C. T. Chon and C. T. Sun, J. Mater. Sci. 15 (1980) 931.CrossRefGoogle Scholar
  72. 72.
    C. Galiotis, R. J. Young, P. H. J. Yeung and D. N. Batchelder, ibid. 19 (1984) 3640.CrossRefGoogle Scholar
  73. 73.
    N. Melanitis, P. Tetlow, C. Galiotis and C. K. L. Davies, in “Interfacial Phenomena in Composite Materials '89”, edited by F. R. Jones (Butterworths, London, 1989) p. 97.Google Scholar
  74. 74.
    R. J. Day, M. Zakikhani, P. P. Ang and R. J. Young, ibid.in “ p. 121.Google Scholar
  75. 75.
    H. Jahankhani, C. Vlattas and C. Galiotis, ibid.in “ p. 125.Google Scholar
  76. 76.
    A. S. Carrara and F. J. McGarry, J. Compos. Mater. 2 (1968) 222.CrossRefGoogle Scholar
  77. 77.
    Y. Termonia, J. Mater. Sci. 22 (1987) 504.CrossRefGoogle Scholar
  78. 78.
    H. Fukuda and K. Kawata, Fibre Sci. Techn. 7 (1974) 129.CrossRefGoogle Scholar
  79. 79.
    I. M. Allison and L. C. Hollaway, Br. J. Appl. Phys. 18 (1967) 979.CrossRefGoogle Scholar
  80. 80.
    A. Okawara, S. Yonemori, A. Kitsunezuka and H. Nishimura, in Proceedings of 3rd International Conference on Composite Interfaces (ICCI-III), Cleveland, May 1990, edited by H. Ishida (Elsevier Applied Science, New York, 1990) p. 61.Google Scholar
  81. 81.
    J. F. Gerard, N. Amdouni, H. Sautereau and J. P. Pascault, ibid.in p. 441.Google Scholar
  82. 82.
    G. Wachinger, ibid.in p. 457.Google Scholar
  83. 83.
    J. L. Thomason, in “Interfacial Phenomena in Composite Materials '89”, edited by F. R. Jones (Butterworths, London, 1989) p. 171.Google Scholar
  84. 84.
    L. T. Drzal, M. J. Rich, M. F. Koenig and P. Lloyd, J. Adhesion 16 (1983) 133.CrossRefGoogle Scholar
  85. 85.
    L. T. Drzal, Mater. Sci. Engng A126 (1990) 289.CrossRefGoogle Scholar
  86. 86.
    T. Bessell and J. B. Shortall, J. Mater. Sci. 10 (1975) 2035.CrossRefGoogle Scholar
  87. 87.
    D. Campbell and M. M. Qayyum, J. Polym. Sci., Polym. Phys. Edn 18 (1980) 83.CrossRefGoogle Scholar
  88. 88.
    R. H. Burton and M. J. Folkes, Plast. Rubb. Process. Appl. 3 (1983) 129.Google Scholar
  89. 89.
    H. Zeng and G. He, Scientia Sinica B27 (1984) 333.Google Scholar
  90. 90.
    C. Y. Yue and W. L. Cheung, J. Mater. Sci. 26 (1991) 870.CrossRefGoogle Scholar
  91. 91.
    W. L. Cheung and C. Y. Yue, Polym. Commun. 31 (1990) 96.Google Scholar
  92. 92.
    L. J. Broutman, in “Interfaces in Composites”, ASTM STP 452 (American Society for Materials and Testing, Philadelphia, 1969) p. 27.CrossRefGoogle Scholar
  93. 93.
    P. S. Chua and M. R. Piggott, Compos. Sci. Techn. 22 (1985) 33.CrossRefGoogle Scholar
  94. 94.
    C. Y. Yue and W. L. Cheung, J. Mater. Sci. Lett. 10 (1991) 1335.CrossRefGoogle Scholar
  95. 95.
    Idem, J. Mater. Sci. submitted.Google Scholar
  96. 96.
    L. B. Greszczuk, in “Interfaces in Composites”, ASTM STP 452 (American Society for Materials and Testing, Philadelphia, 1969) p. 42.CrossRefGoogle Scholar
  97. 97.
    P. Lawrence, J. Mater. Sci. 7 (1972) 1.CrossRefGoogle Scholar
  98. 98.
    G. S. Fielding-Russell, D. I. Livingston and D. W. Nicholson, Rubb. Chem. Techn. 53 (1980) 950.CrossRefGoogle Scholar
  99. 99.
    B. Betz, J. Mater. Sci. 17 (1982) 691.CrossRefGoogle Scholar
  100. 100.
    G. A. Cooper, ibid. 5 (1970) 645.CrossRefGoogle Scholar
  101. 101.
    A. Takaku and R. G. C. Arridge, J. Phys. D: Appl. Phys. 6 (1973) 2038.CrossRefGoogle Scholar
  102. 102.
    R. J. Gray, J. Mater. Sci. 19 (1984) 861.CrossRefGoogle Scholar
  103. 103.
    M. J. Pitkethly and J. B. Doble, Composites 21 (1990) 389.CrossRefGoogle Scholar
  104. 104.
    J. K. Wells and P. W. R. Beaumont, J. Mater. Sci. 23 (1988) 1274.CrossRefGoogle Scholar
  105. 105.
    C. Gurney and J. Hunt, Proc. R. Soc. A299 (1967) 508.Google Scholar
  106. 106.
    H. Stang and S. P. Shah, J. Mater. Sci. 21 (1986) 953.CrossRefGoogle Scholar
  107. 107.
    K. Kendall, ibid. 10 (1975) 1011.CrossRefGoogle Scholar
  108. 108.
    C. K. Y. Leung and V. C. Li, ibid. 9 (1990) 1140.Google Scholar
  109. 109.
    C. A. Cooper and D. G. Gladman, in National Physical Laboratory IMS Report No. 8 (Internal Report, 1970).Google Scholar
  110. 110.
    J. K. Wells and P. W. R. Beaumont, J. Mater. Sci. 20 (1985) 1275.CrossRefGoogle Scholar

Copyright information

© Chapman & Hall 1992

Authors and Affiliations

  • C. Y. Yue
    • 1
  • W. L. Cheung
    • 2
  1. 1.School of Mechanical and Production EngineeringNanyang Technological UniversitySingapore
  2. 2.Department of Mechanical EngineeringUniversity of Hong KongHong Kong

Personalised recommendations