Advertisement

Journal of Materials Science

, Volume 26, Issue 16, pp 4369–4374 | Cite as

Characterization of rapidly solidified structures of Al-6Fe-3MM

  • C. S. Sivaramakrishnan
  • K. Lal
  • R. K. Mahanti
Papers

Abstract

Rapidly solidified and processed Al-6Fe-3MM (MM stands for Misch Metal) has been studied for microstructural characterization through optical microscopy, transmission electron microscopy and X-ray diffraction analysis. It has been shown that the RS ribbons of this alloy could be consolidated and processed through extrusion, forging and hot rolling and that the microstructures are stable up to 300°C.

Keywords

Polymer Microstructure Microscopy Electron Microscopy Transmission Electron Microscopy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    B. H. Kear and M. Cohen (eds), “Rapid Solidification Processing: Principles and Techniques” (Claitor's Publishing Division, Baton Range LA, 1980).Google Scholar
  2. 2.
    R. Ray, in Proceedings of the 4th International Conference of Rapidly Quenched Metals, edited by T. Masumoto and K. Suzuki (The Japan Institute of Metals, 1982) p. 1515.Google Scholar
  3. 3.
    S. C. Langenbeck and R. A. Raimen, AFWAL-TR-86-4027 (1986).Google Scholar
  4. 4.
    C. M. Adams, in “Rapidly Solidified Amorphous and Crystalline Alloys”, edited by B. H. Kear, B. C. Giessen and M. Cohen (Elsevier, New York, 1982) p. 411.Google Scholar
  5. 5.
    T. R. Anantharaman, Proceedings of the Aluminium Congress II, January 1987 (Delhi, India) p. 1.Google Scholar
  6. 6.
    C. Jansan, Splat Cooled Al-Rich Transition Metal Alloys, (PhD Thesis, MIT, August 1971).Google Scholar
  7. 7.
    S. K. Das, K. Okazaki and C. M. Adams, in Proceedings of High Temperature Alloys: Theory and Design, edited by J. O. Stiegler, 9–11 April 1984, p. 451.Google Scholar
  8. 8.
    S. K. Das, Proceedings of the International Conference on Rapid Solidification Processing & Technology ICMS-89, edited by C. S. Sivaramakrishnan and O. N. Mohanty, 15–17 March 1989, India.Google Scholar
  9. 9.
    H. Jones, Mater. sci. Eng. 5 (1969/1970) 1.CrossRefGoogle Scholar
  10. 10.
    H. L. Fraser, RSP and Powder Metallurgy of Aluminium Alloys, Second Annual Report, AFOSR Grant No. 82-D186, October 1986.Google Scholar
  11. 11.
    J. W. Jindel, J. T. Stanley, R. D. Field and H. L. Fraser, ASM Symposium Rapidly Solidified Powder Alluminium Alloys, 4–5 September 1984.Google Scholar
  12. 12.
    J. M. Sater, S. C. Jha and T. H. Sanders, Mater sci. Eng. 91 (1987) 201.CrossRefGoogle Scholar
  13. 13.
    H. A. Davies, N. Shohoji and D. H. Warrington, Proceedings of the 2nd International Conference on Rapid Solidification Processing: Principles and Techniques Reston VA, 23–26 March, 1980 (Claitor's Publishing Division, Baton Range LA, 1980) p. 153.Google Scholar
  14. 14.
    L. Ackermann, S. Dermarkar and J. F. Faure, “Aluminium Technology 86”, edited by T. Sheppard (Institute of Metals, 1986) p. 698.Google Scholar

Copyright information

© Chapman & Hall 1991

Authors and Affiliations

  • C. S. Sivaramakrishnan
    • 1
  • K. Lal
    • 1
  • R. K. Mahanti
    • 1
  1. 1.National Metallurgical LaboratoryJamshedpurIndia

Personalised recommendations