Journal of Materials Science

, Volume 27, Issue 10, pp 2619–2622 | Cite as

Specific sintering by temperature impulses as a mechanism of formation of a TiN layer in the reactive pulse plasma

  • Z. Romanowski
  • M. Wronikowski


A layer of separate TiN particles was fabricated and temperature pulsed in order to determine whether the short lasting intense heat of the deposited clusters can lead to their sintering. It was found that a specific sintering process is inseparably involved in the process of crystallization of the layer from the pulse plasma. The pulse heating also causes an increase in the adhesion of the layer to the substrate.


Polymer Crystallization Sinter Process Pulse Heating Pulse Plasma 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    M. Sokołowki, A. Sokołowska, A. Michalski, Z. Romanowski, A. Rusek-Mazurek and M. Wronikowski, Thin Solid Films 80 (1981) 249.CrossRefGoogle Scholar
  2. 2.
    A. Michalski and Z. Romanowski, J. Cryst. Growth 61 (1983) 675.CrossRefGoogle Scholar
  3. 3.
    M. Sokołowski, A. Sokołowska, B. Gokieli, A. Michalski, A. Rusek and Z. Romanowski, ibid. 47 (1979) 421.CrossRefGoogle Scholar
  4. 4.
    A. Sokołowska, J. Walkowicz and A. Olszyna, in “Proceedings of the International Conference on Plasma Science and Technology” (Science Press, Beijing, China, 1986) p. 572.Google Scholar

Copyright information

© Chapman & Hall 1992

Authors and Affiliations

  • Z. Romanowski
    • 1
  • M. Wronikowski
    • 2
  1. 1.Institut of Materials Science and EngineeringWarsaw University of TechnologyWarsawPoland
  2. 2.Cable FactoryOżarówPoland

Personalised recommendations