Advertisement

Journal of Materials Science

, Volume 28, Issue 17, pp 4799–4803 | Cite as

Surface modification of superdrawn polyoxymethylene fibres

Part I Interfacial miscibility in the fibre/adhesive/rubber system
  • T. Komatsu
Papers

Abstract

A new surface modification of superdrawn polyoxymethylene (POM) fibres, curing with resorcinol at mild temperatures, was developed to apply to rubber composites and the adhesion to the rubber matrix behaviour of modified fibres is discussed in terms of the interfacial miscibility between the fibre and adhesive surface layers. The modified fibre reached the maximum pull-out adhesion level in which a cohesive failure of the fibre occurs, resulting from the fact that the modified POM layer is spectroscopically close to the standard resorcinol-formaldehyde (RF) resin, thoroughly miscible and thermodynamically compatible with the resorcinol-formaldehyde-latex (RFL) adhesive.

Keywords

Polymer Rubber Surface Layer Surface Modification Resorcinol 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    I. Skeist, “Handbook of adhesives” (Reinhold, New York, 1962) p. 495.Google Scholar
  2. 2.
    Y. Iyengar, Rubber World 148 (6) (1963) 39.Google Scholar
  3. 3.
    Idem., J. Appl. Polym. Sci. 13 (1979) 353.CrossRefGoogle Scholar
  4. 4.
    A. K. Mukherjee, S. G. Kulkarni, and S. N. Chakravarty, J. Appl. Polym. Sci. 34 (1987) 913.CrossRefGoogle Scholar
  5. 5.
    Y. Iyengar and D. E. Erickson, J. Appl. Polym. Sci. 11 (1967) 2311.CrossRefGoogle Scholar
  6. 6.
    Y. Iyengar, J. Appl. Polym. Sci. 22 (1978) 801.CrossRefGoogle Scholar
  7. 7.
    H. C. Beachell and S. P. Nemphos, J. Polym. Sci. 21 (1956) 113.CrossRefGoogle Scholar
  8. 8.
    M. J. Barbarisi, Nature 215 (1967) 383.CrossRefGoogle Scholar
  9. 9.
    W. H. Shrader and M. J. Powers. Plast. Technol. 3 (1957) 988.Google Scholar
  10. 10.
    M. J. Bodnar and W. J. Powers, Plast. Technol. 4 (1958) 721.Google Scholar
  11. 11.
    N. H. Ladizesky and I. M. Ward, J. Mater. Sci. 18 (1983) 533.CrossRefGoogle Scholar
  12. 12.
    B. Catoire, P. Bouriot, O. Demuth, A. Baszkin, and M. Chevrier, Polymer 25 (1984) 766.CrossRefGoogle Scholar
  13. 13.
    N. H. Ladizesky and I. M. Ward, Comp. Sci. Technol. 26 (1986) 129.CrossRefGoogle Scholar
  14. 14.
    M. Nadin and I. M. Ward, Mater. Sci. Technol. 3 (1987) 814.CrossRefGoogle Scholar
  15. 15.
    N. H. Ladizesky and I. M. Ward, J. Mater. Sci. 24 (1989) 3763.CrossRefGoogle Scholar
  16. 16.
    B. Tissington, G. Pollard, and I. M. Ward, J. Mater. Sci. 26 (1991) 82.CrossRefGoogle Scholar
  17. 17.
    D. A. Biro, G. Pleizier, and Y. Deslandes, J. Mater. Sci. Lett. 11 (1992) 698.CrossRefGoogle Scholar
  18. 18.
    E. R. Nelson, T. J. Kilduff, and A. A. Benderly, Ind. Engng. Chem. 50 (3) (1958) 329.CrossRefGoogle Scholar
  19. 19.
    A. A. Benderly, J. Appl. Polym. Sci. 6(20) (1962) 221.CrossRefGoogle Scholar
  20. 20.
    K. Nakagawa, T. Konaka, and S. Yamakawa, Polymer 26 (1985) 84.CrossRefGoogle Scholar
  21. 21.
    T. Konaka, K. Nakagawa, and S. Yamakawa, ibid. 26 (1985) 462.CrossRefGoogle Scholar
  22. 22.
    T. Komatsu, S. Enoki, and A. Aoshima, ibid. 32 (1991) 1983.CrossRefGoogle Scholar
  23. 23.
    Idem., ibid., 32 (1991) 1988.CrossRefGoogle Scholar
  24. 24.
    W. M. Bruner and C. M. Baranato, Mod. Plast. 39(4) (1961) 97.Google Scholar
  25. 25.
    M. Yamao, S. Nukui, H. Kitazawa, and S. Tanaka, Kogyo Kagaku Zasshi 74 (1971) 2193.CrossRefGoogle Scholar
  26. 26.
    M. Yamao, Y. Tanaka, S. Nukui, A. Kubota, and S. Tanaka, Bunseki Kagaku 21 (1972) 491.CrossRefGoogle Scholar
  27. 27.
    J. C. Evans, Spectrochim. Acta. 16 (1960) 1382.CrossRefGoogle Scholar
  28. 28.
    W. A. Zisman, “Contact angle, wettability and adhesion”, Advances in Chemistry Series, No.43, (American Chemistry Society, Washington, 1964) p. 1.CrossRefGoogle Scholar
  29. 29.
    S. M. Aharoni, J. Appl. Polym. Sci. 45 (1992) 813.CrossRefGoogle Scholar
  30. 30.
    D. W. Van Krevelen, “Properties of polymers”, 3rd Edn (Elsevier 1990) p. 233.Google Scholar
  31. 31.
    Idem., ibid., The γ LV of resorcinol was calculated from the parachors listed on p. 229.Google Scholar
  32. 32.
    Idem., ibid., p. 198.Google Scholar

Copyright information

© Chapman & Hall 1993

Authors and Affiliations

  • T. Komatsu
    • 1
  1. 1.Analytical research center of Asahi Chemical Industry Company LtdSizuokaJapan

Personalised recommendations