Advertisement

Journal of Materials Science

, Volume 29, Issue 16, pp 4191–4199 | Cite as

Properties of fibre reinforced concrete using recycled fibres from carpet industrial waste

  • Youjiang Wang
  • Abdul-Hamid Zureick
  • Baik-Soon Cho
  • D. E. Scott
Papers

Abstract

A study was carried out to evaluate the use of recycled fibres from carpet industrial waste for reinforcement of concrete at 1 and 2 vol% fractions. Compressive, flexural, splitting tensile and shrinkage tests were performed. Significant increases in shatter resistance, energy absorption and ductility were observed. This paper reports on the experimental programme and compares the effectiveness of such recycled fibres with that of virgin polypropylene fibres specially made for fibre reinforced concrete (FRC). The paper also discusses the benefits of using such FRC for construction applications and possible ways to further enhance the performance of such FRC.

Keywords

Polymer Shrinkage Ductility Polypropylene Energy Absorption 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    ACI Committee 544, “State-of-the-art report on fiber reinforced concrete”, 544.IR-82 (reapproved 1986) (American Concrete Institute, Detroit 1986).Google Scholar
  2. 2.
    J. G. Keer, in “New reinforced concretes: concrete technology and design”, Vol. 2, edited by R. N. Swamy, (Surrey University Press, Blackie, London, 1984) pp. 52–105.Google Scholar
  3. 3.
    A. Bentur and S. Mindess, “Fiber reinforced cementitious composites” (Elsevier, London, 1990).Google Scholar
  4. 4.
    ACI Committee 544, “Design considerations for steel fiber reinforced concrete”. ACI 544.4R, ACI Struct. J. September–October (1988) 563.Google Scholar
  5. 5.
    ACI Committee 318, “Building Code Requirements for Reinforced Concrete”, ACI 318 (American Concrete Institute, Detroit, 1983) p. 34.Google Scholar
  6. 6.
    Y. Wang and S. Backer, Int. J. Cement Compos. Lightweight Concrete 11 (1989) 11.CrossRefGoogle Scholar
  7. 7.
    R. F. ZOLLO, J. A. ILTER and G. B. BOUCHACOURT, “The effect of collated fibrillated polypropylene fibres on plastic and drying shrinkage in concrete”, A research report distributed by the Forta Corporation, Grove City, PA, 1984.Google Scholar
  8. 8.
    P. S. Magnet and M. M. Azari, J. Mater. Sci. 19 (1984) 2183.CrossRefGoogle Scholar
  9. 9.
    R. N. Swamy and H. Stavrides, ACI J. 76 (1979) 443.Google Scholar
  10. 10.
    K. Komlos and L. Brull, in Proceedings of the International Symposium on Fiber Reinforced Concrete, December 1987, Madras India (Oxford & IBH Publishing, New Delhi, 1987) pp. 4.41.Google Scholar
  11. 11.
    J. C. Chern and C. H. Young, ACI Mater. J. 87 (1990) 123.Google Scholar
  12. 12.
    Y. Wang, V. C. Li and S. Backer, Cement and Concrete Compos. 12 (1990) 29.CrossRefGoogle Scholar
  13. 13.
    Y. Wang, S. Backer and V. C. Li, J. Mater. Sci. 22 (1987) 4281.CrossRefGoogle Scholar
  14. 14.
    Y. Wang, V. C. Li and S. Backer, J. Mater. Sci. 26 (1991) 6565.CrossRefGoogle Scholar
  15. 15.
    V.C. Li, Y. Wang and S. Backer, J. Mech. Phys. Solids 39 (1991) 607.CrossRefGoogle Scholar

Copyright information

© Chapman & Hall 1994

Authors and Affiliations

  • Youjiang Wang
    • 1
  • Abdul-Hamid Zureick
    • 2
  • Baik-Soon Cho
    • 2
  • D. E. Scott
    • 2
  1. 1.School of Textile & Fiber EngineeringGeorgia Institute of TechnologyAtlantaUSA
  2. 2.School of Civil EngineeringGeorgia Institute of TechnologyAtlantaUSA

Personalised recommendations