Advertisement

Journal of Materials Science

, Volume 31, Issue 3, pp 565–571 | Cite as

The effect of Ti-colloid surface conditioning on the phosphating of 7075-T6 aluminium alloy

  • J. F. Ying
  • M. Y. Zhou
  • B. J. Flinn
  • P. C. Wong
  • K. A. R. Mitchell
  • T. Foster
Papers

Abstract

7075-T6 aluminium alloys panels were surface conditioned in a titanium colloid suspension, under a variety of different conditions, and subsequently these samples were immersed in a ZnO + H3PO4 coating mixture, and the phosphate coating layers characterized. Morphologies observed by scanning electron microscopy (SEM) reveal that the coating layer consists of two phases, namely an amorphous phase, which is directly bonded to the substrate, and a crystalline phase, in which larger crystal grains grow on top of the amorphous base. Chemical compositions of the coating layers were analysed by X-ray photoelectron spectroscopy (XPS) and by static and imaging secondary ion mass spectroscopy (SIMS). It is found that the details of the surface conditioning affect the final coating, both in terms of morphology and chemical composition. For example, larger amounts of Zn and P are detected in coatings for which the initial conditioning is done at 40°C, compared with room temperature; a similar statement can be made for surfaces which are water rinsed after the Ti pretreatment, compared with those which are not water rinsed prior to the coating treatment.

Keywords

Aluminium Alloy Amorphous Phase H3PO4 Coating Layer Colloid Suspension 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    T. FOSTER, G. N. BLENKINSOP, P. BLATTLER and M. SZANDOROWSKI, J. Coating Technol. 63 (1991) 91.Google Scholar
  2. 2.
    Idem, ibid. 63 (1991) 101.Google Scholar
  3. 3.
    G. ADRIAN and A. BITTNER, ibid. 58 (1986) 59.Google Scholar
  4. 4.
    W. RAUSCH, “The Phosphating of Metals” (Finishing Publications, Teddington, 1990) Ch. 3.Google Scholar
  5. 5.
    D. B. FREEMAN, “Phosphating and Metal Pre-treatment” (Industrial Press, New York, 1986) Ch. 8.Google Scholar
  6. 6.
    T. W. CAPE, “Metals Handbook”, Vol. 13 Corrosion (American Society for Metals International, Metals Park, OH, 1987) p. 383.Google Scholar
  7. 7.
    A. TURUNO, K. TOYOSE and H. FUJIMOTO, Kobelco Tech. Rev. 11 (1991) 14.Google Scholar
  8. 8.
    K. TOYOSE, A. TSURUNO, H. FUJIMOTO and S. KOGA, ibid. 13 (1992) 56.Google Scholar
  9. 9.
    W. F. HEUNG, Y. P. YANG, P. C. WONG, K. A. R. MITCHELL and T. FOSTER, J. Mater. Sci. 29 (1994) 1368.CrossRefGoogle Scholar
  10. 10.
    W. F. HEUNG, Y. P. YANG, M. Y. ZHOU, P. C. WONG, K. A. R. MITCHELL and T. FOSTER, ibid. 29 (1994) 3653.CrossRefGoogle Scholar
  11. 11.
    W. F. HEUNG, P. C. WONG, K. A. R. MITCHELL and T. FOSTER, ibid. 29 3653 (1995) in press.CrossRefGoogle Scholar

Copyright information

© Chapman & Hall 1996

Authors and Affiliations

  • J. F. Ying
    • 1
  • M. Y. Zhou
    • 1
  • B. J. Flinn
    • 1
  • P. C. Wong
    • 1
  • K. A. R. Mitchell
    • 1
  • T. Foster
    • 2
  1. 1.Department of ChemistryUniversity of British ColumbiaVancouverCanada
  2. 2.Chemistry Group, Defence Research Establishment PacificFMO VictoriaCanada

Personalised recommendations