Variations of physical properties in pellets containing alumina/carbon powder mixtures during reduction and nitridation
- 32 Downloads
Surface area and porosity of pellets containing alumina/carbon powder mixtures during reduction and nitridation were determined. The experimental results indicated that surface area and porosity of solid samples were decreased by increasing the reaction temperature, grain size, forming pressure and the amount of catalyst. Increasing the molar ratio of C/Al2O3 and gas flow rate could decrease the surface area and increase the porosity of the solid sample.
KeywordsPolymer Grain Size Porosity Reaction Temperature Material Processing
Unable to display preview. Download preview PDF.
- 1.N. Kuramoto and H. Taniguchi, US Pat. 4618 592 (1986).Google Scholar
- 3.T. Ya. Kosolapova, D. S. Yakovleva, G. S. Oleinik, T. S. Bartnitskaya, N. P. Tel'nikova and I. I. Timofeeva, Sov. Powder Metall. Metal Ceram. 11 (263) (1984) 829.Google Scholar
- 4.H. L. Wang, MS thesis, Department of Mineral Metallurgy and Materials Science, National Cheng Kung University, Tainan, Taiwan (1988).Google Scholar
- 11.C. I. Lin, Technical Report to National Science Council of Taiwan, NSC 83-0402-E-011-035 (1994).Google Scholar