Advertisement

Journal of Materials Science

, Volume 29, Issue 12, pp 3215–3220 | Cite as

Effects of amorphous silica coatings on the sintering behaviours of SiC whisker-reinforced Al2O3 composites

  • Chih Cheng Chen
  • Fu Su Yen
Article

Abstract

In this study, pressureless sintering of silicon carbide whisker (SiCw)-reinforced alumina composites was investigated. SiC whiskers or Al2O3 powders were coated with amorphous silica, and sintering behaviour was analysed according to the powder characteristics of the composite. It was found that amorphous silica coatings improved densification as compared with uncoated powders, because the viscous flow allows the release of any tensile stress due to differential shrinkage between the matrix and the silicon carbide whiskers. Mullite occurred when amorphous silica coatings reacted with alumina at ∼1500 °C, which resisted the viscous sintering of the amorphous silica coatings.

Keywords

Carbide Al2O3 Shrinkage Tensile Stress Material Processing 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    P. F. Beacher and G. C. Wei, J. Amer. Ceram. Soc. 63 (1984) C267.Google Scholar
  2. 2.
    G. C. Wei and P. F. Beacher, Amer. Ceram. Soc. Bull. 64 (1985) 298.Google Scholar
  3. 3.
    A. H. Chokshi and J. R. Porter, J. Amer. Ceram. Soc. 68 (1985) C144.CrossRefGoogle Scholar
  4. 4.
    S. C. Samanta and S. Musikant, Ceram. Engng. Sci. Proc. 6 (1985) 663.CrossRefGoogle Scholar
  5. 5.
    F. D. Gac and J. J. Petrovic, J. Amer. Ceram. Soc. 68 (1985) C200.CrossRefGoogle Scholar
  6. 6.
    P. D. Shalek, J. J. Petrovic, G. F. Hurely and F. D. Gac, Amer. Ceram. Soc. Bull. 65 (1986) 354.Google Scholar
  7. 7.
    K. Gadkaree and K. Chyung, ibid. 65 (1986) 370.Google Scholar
  8. 8.
    R. Lundberg, L. Kahlman, R. Pome and R. Carsson, ibid. 66 (1987) 330.Google Scholar
  9. 9.
    J. Homeny, W. L. Vaughn and M. K. Ferber, ibid. 66 (1987) 333.Google Scholar
  10. 10.
    T. N. Tiegs and P. F. Becher, ibid. 66 (1987) 339.Google Scholar
  11. 11.
    J. R. Porter, F. F. Lange and A. H. Chokshi, ibid. 66 (1987) 343.Google Scholar
  12. 12.
    S. T. Buljan, J. G. Baldoni and M. L. Huckabee, ibid. 66 (1987) 347.Google Scholar
  13. 13.
    R. Lunberg, B. Nyberg, K. Williander, M. Persson and R. Varlsson, Composites 18 (1987) 125.CrossRefGoogle Scholar
  14. 14.
    S. J. Barclay, J. R. Fox and H. K. Bowen, J. Mater. Sci. 22 (1987) 4403.CrossRefGoogle Scholar
  15. 15.
    M. D. Sacks, H. W. Lee and O. E. Rojas, J. Amer. Ceram. Soc. 71 (1988) 370.CrossRefGoogle Scholar
  16. 16.
    M. D. Sacks, H. W. Lee and O. E. Rojas, Ceram. Engng. Soc. Proc. 9 (1988) 741.CrossRefGoogle Scholar
  17. 17.
    M. D. Sacks, H. W. Lee and O. E. Rojas, in “Ceramic Powder Science” IIA (Ceramic Transactions Vol. 1)edited by G. L. Messing, E. R. Fullerand and H. Hausner (American Ceramic Society, Westerville, Ohio, 1988) p. 440.Google Scholar
  18. 18.
    M. Hoffmann, A. Nagel, P. Greil and G. Petzow, J. Amer. Ceram. Soc. 72 (1988) 765.CrossRefGoogle Scholar
  19. 19.
    T. T. Meek, R. D. Blake, and J. J. Petrovic, Ceram. Engng. Sci. Proc. 9 (1987) 861.CrossRefGoogle Scholar
  20. 20.
    H. W. Lee and M. D. Sacks, J. Amer. Ceram. Soc. 73 (1990) 1884.CrossRefGoogle Scholar
  21. 21.
    H. W. Lee and M. D. Sacks, ibid. 73 (1990) 1894.CrossRefGoogle Scholar
  22. 22.
    L. C. De Jonghe, M. N. Rahaman and C. H. Hsueh, Acta Metall. 34 (1986) 1467.CrossRefGoogle Scholar
  23. 23.
    M. N. Rahaman and L. C. De Jonghe, J. Amer. Ceram. Soc. 70 (1987) C348.CrossRefGoogle Scholar
  24. 24.
    M. W. Weiser and L. C. De Jonghe, ibid. 71 (1988) C125.CrossRefGoogle Scholar
  25. 25.
    R. Raj and R. K. Bordia, Acta Metall. 32 (1984) 1003.CrossRefGoogle Scholar
  26. 26.
    C. H. Hsueh, A. G. Evans, R. M. Cannon and R. J. Brook, ibid. 34 (1986) 927.CrossRefGoogle Scholar
  27. 27.
    O. Sudre, G. Bao, B. Fan, F. F. Lange and A. G. Evans, J. Amer. Ceram. Soc. 75 (1992) 525.CrossRefGoogle Scholar
  28. 28.
    G. W. Scherer, ibid. 70 (1987) 719.CrossRefGoogle Scholar
  29. 29.
    G. W. Scherer, ibid. 71 (1988) C315.Google Scholar
  30. 30.
    R. K. Bordia and G. W. Scherer, Acta Metall. 36 (1988) 2411.CrossRefGoogle Scholar
  31. 31.
    R. M. German, Metall. Tran. 23A (1992) 1455.CrossRefGoogle Scholar
  32. 32.
    F. F. Lange, Mater. Res. 2 (1987) 59.CrossRefGoogle Scholar
  33. 33.
    E. Holm and M. J. Cima, J. Amer. Ceram. Soc. 72 (1989) 303.CrossRefGoogle Scholar
  34. 34.
    M. D. Sacks and N. Bozkurt and G. W. Scheiffele, ibid. 74 (1991) 2428.CrossRefGoogle Scholar
  35. 35.
    F. S. Yen and C.S. Hsi, H. Y. Chang and H. Y. Lu, J. Mater. Sci. 26 (1991) 2150.CrossRefGoogle Scholar
  36. 36.
    C. S. Hsi and H. Y. Cang and F. S. Yen, J. Amer. Ceram. Soc. 72 (1989) 2208.CrossRefGoogle Scholar

Copyright information

© Chapman & Hall 1994

Authors and Affiliations

  • Chih Cheng Chen
    • 1
  • Fu Su Yen
    • 1
  1. 1.Graduate School of Minerals, Metallurgy and Materials EngineeringNational Cheng-Kung UniversityTainanTaiwan

Personalised recommendations