Journal of Materials Science

, Volume 29, Issue 23, pp 6329–6334 | Cite as

Rapidly solidified low-silver brazing filler alloy foils

  • S. C. Dev
  • O. N. Mohanty


A rapidly solidified (RS) low-silver brazing alloy with 50% saving in silver has been developed as a potential substitute for the conventional Ag 72% — Cu 28% eutectic alloy. Major applications are envisioned in the electronics and vacuum tube industries. The RS alloy possesses brazing characteristics better than its conventionally cast counterpart, and superior to the traditional silver-copper eutectic alloy.


Polymer Material Processing Eutectic Alloy Vacuum Tube Major Application 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    M. R. Lambert, Weld. J. 68 (1989) 215-s.Google Scholar
  2. 2.
    O. N. Mohanty and C. S. Sivaramakrishnan, “Rapid Solidification Processing and Technology” (Trans. Tech., 1990).Google Scholar
  3. 3.
    D. Banerjee and L. A. Jacobson, “Metastable Microstructures” (Oxford, IBM, 1993).Google Scholar
  4. 4.
    N. J. DeCristofaro and A. Datta, in “Proceedings of TMS-AIME on Rapidly Solidified Crystalline Alloys”, New Jersey, May 1985, edited by S. K. Das, B. H. Kear and C. M. Adam (Allied Corporation, New Jersey, 1985) p. 263.Google Scholar
  5. 5.
    A. Rabinkin, Weld. J. 68 (10) (1989) 39.Google Scholar
  6. 6.
    N. J. DeCristofaro and C. Henschel, ibid. 57(7) (1978) 33.Google Scholar
  7. 7.
    J. V. Wood, Mater. Design 4 (June/July) (1983) 766.CrossRefGoogle Scholar
  8. 8.
    S. C. Dev, P. Basak, R. K. Dubey and O. N. Mohanty, “Low Silver Brazing Filler Alloy for Electronics and Vacuum Tube Industries”, paper presented at the Annual Technical Meeting of Ind. Inst. Met, Calcutta, India, November 1989.Google Scholar
  9. 9.
    S. C. Dev, P. Basak, Inder Singh, R. K. Dubey and O. N. Mohanty, J. Mater. Sci. 27 (1992) 6646.CrossRefGoogle Scholar
  10. 10.
    O. T. Barnett, “Filler Metals for Joining” (Chapman and Hall, London, 1959) p. 205.Google Scholar
  11. 11.
    AWS, “Brazing Manual” (Chapman and Hall, London, 1955) p. 30.Google Scholar
  12. 12.
    R. J. C. Dawson, “Fusion Welding and Brazing of Cu and Cu Alloys” (Newnes-Butterworths, London, 1973) p. 88.Google Scholar
  13. 13.
    N. Lashko and S. Lashko, “Brazing and Soldering of Metals” (MIR, Moscow 1979) p. 116.Google Scholar
  14. 14.
    A. Sakamoto, Weld. J. 62(10) (1983) 275-s.Google Scholar
  15. 15.
    Y. Yoshida and M. Morikawa, in “Proceedings of the Sixth International Precious Metals Institute Conference”, Newport Beach, California 1982, edited by M. I. E. Guindy (Pergamon Press, New York), p. 185.Google Scholar

Copyright information

© Chapman & Hall 1994

Authors and Affiliations

  • S. C. Dev
    • 1
  • O. N. Mohanty
    • 2
  1. 1.National Metallurgical LaboratoryJamshedpurIndia
  2. 2.Research and Development, Tata SteelJamshedpurIndia

Personalised recommendations