Advertisement

Journal of Materials Science

, Volume 29, Issue 21, pp 5499–5514 | Cite as

Cavitation and cavity-induced fracture during superplastic deformation

  • Xing-Gang Jiang
  • James C. Earthman
  • Farghalli A. Mohamed
Review

Abstract

The characteristics of fracture by cavitation in superplastic materials are reviewed. Particular attention is paid to the theoretical developmental aspects of cavity nucleation, cavity growth and cavity interlinkage. Various factors, including grain boundary sliding, impurity atoms or particles, phase proportion, deformation temperature, strain rate, strain and grain size, are discussed. Finally, methods for controlling cavitation during superplastic deformation are summarized, and problems which require further work are also presented.

Keywords

Polymer Grain Size Cavitation Material Processing Deformation Temperature 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A. K. GHOSH, in “Deformation of polycrystals: Mechanisms and microstructures”, 2nd Risø Int. Conf. on Metallurgy and Materials Science, edited by N. Hansen, A. Horsewell, T. Leffers and H. Liholt (Risø National Laboratory, Roskilde, Denmark, 1981) p. 277.Google Scholar
  2. 2.
    C. C. BAMPTON and J. W. EDINGTON, Metall. Trans. 13A (1982) 1721.Google Scholar
  3. 3.
    K. MATSUKI, Y. UENO, M. YAMADA and Y. MURAKAMI, J. Jpn. Inst. Metals, 41 (1977) 1136.Google Scholar
  4. 4.
    S. A. SHEI and T. G. LANGDON, J. Mater. Sci. 13 (1978) 1084.Google Scholar
  5. 5.
    C. H. CACERES and D. S. WILKINSON, Acta Metall. 32 (1984) 423.Google Scholar
  6. 6.
    D. A. MILLER and T. G. LANGDON, Trans. JIM 21 (1980) 123.Google Scholar
  7. 7.
    A. H. CHOKSHI and T. G. LANGDON, Acta Metall. Mater. 38 (1990) 867.Google Scholar
  8. 8.
    X. G. JIANG, J. Z. CUI and L. X. MA, Mater. Sci. Engng. A157 (1992) 37.Google Scholar
  9. 9.
    X. G. JIANG, J. Z. CUI and L. X. MA, Acta Metall. Mater. 41 (1993) 2721.Google Scholar
  10. 10.
    A. H. CHOKSHI and T. G. LANGDON, J. Mater. Sci. 24 (1989) 143.Google Scholar
  11. 11.
    D. W. LIVESEY and N. RIDLEY, Metall. Trans. 9A (1978) 519.Google Scholar
  12. 12.
    D. W. LIVESEY and N. RIDLEY, Metall. Trans. 13A (1982) 1619.Google Scholar
  13. 13.
    J. W. D. PATTERSON and N. RIDLEY, J. Mater. Sci. 16 (1981) 457.Google Scholar
  14. 14.
    J. BELZUNCE and M. SUERY, Acta Metall. 31 (1983) 1479.Google Scholar
  15. 15.
    H. M. SHANG and M. SUERY, Metal Sci. 18 (1984) 143.Google Scholar
  16. 16.
    D. W. LIVESEY and N. RIDLEY, Metal Sci. 16 (1982) 563.Google Scholar
  17. 17.
    M. SUERY and B. BAUDELET, Phil. Mag. 41A (1980) 41.Google Scholar
  18. 18.
    M. M. I. AHMED, F. A. MOHAMED and T. G. LANGDON, J. Mater. Sci. 14 (1979) 2913.Google Scholar
  19. 19.
    D. A. MILLER and T. G. LANGDON, Metall. Trans. 9A (1978) 1688.Google Scholar
  20. 20.
    B. P. KASHYAP and K. TANGRI, Metall. Trans. 18A (1987) 417.Google Scholar
  21. 21.
    A. H. CHOKSHI and T. G. LANGDON, Acta Metall. 37 (1989) 715.Google Scholar
  22. 22.
    H. ISHIKAWA, D. G. BHAT, F. A. MOHAMED and T. G. LANGDON, Metall. Trans. 8A (1977) 523.Google Scholar
  23. 23.
    F. WAKAI and H. KATO, Adv. Ceram. Mater. 3 (1988) 71.Google Scholar
  24. 24.
    D. J. SCHISSLER, A. H. CHOKSHI, T. G. NEIEH and J. WADSWORTH, Acta Metall. Mater. 39 (1991) 3227.Google Scholar
  25. 25.
    A. H. CHOKSHI, J. Amer. Ceram. Soc. 74 (1991) 869.Google Scholar
  26. 26.
    K. R. VENKATACHARI and R. RAJ, J. Amer. Ceram. Soc. 69 (1986) 135.Google Scholar
  27. 27.
    F. WAKAI, S. SAKAGUCHI and Y. MATSUNO, Adv. Ceram. Mater. 1 (1986) 259.Google Scholar
  28. 28.
    A. H. CHOKSHI, Mater. Sci. Engng. A 166 (1993) 119.Google Scholar
  29. 29.
    R. DUCLOS, J. CRAMPON and B. AMANA, Acta Metall. 37 (1989) 877.Google Scholar
  30. 30.
    T. HERMANNSON, K. P. D. LAGERLOF and G. L. DUNLOP, in “Superplasticity and superplastic forming”, edited by C. H. Hamilton and N. E. Paton (TMS-AIME, Warrendale, PA, 1988) p. 631.Google Scholar
  31. 31.
    Y. MA and T. G. LANGDON, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 325.Google Scholar
  32. 32.
    M. W. MAHONEY and A. K. GHOSH, Metall. Trans. 18A (1987) 653.Google Scholar
  33. 33.
    A. H. CHOKSHI, D. J. SCHISSLER, T.-G. NIEH and J. WADSWORTH, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 379.Google Scholar
  34. 34.
    F. WAKAI and H. KATO, Adv. Ceram. Mater. 3 (1988) 71.Google Scholar
  35. 35.
    T. G. NIEH and J. WADSWORTH, Acta Metall. Mater. 39 (1991) 3037.Google Scholar
  36. 36.
    T. G. NIEH, in “Superplasticity in metal, ceramics and intermetallics”, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (Materials Research Society, Pittsburgh, PA, 1990) p. 185.Google Scholar
  37. 37.
    J. MUKHOPADHYAY, G. C. KASCHNER and A. K. MUKHERJEE, in “Superplasticity in aerospace II”, edited by Terry R. Mcnelley and H. Charles Heikkenen (TMS-AIME, Warrendale, PA, 1990).Google Scholar
  38. 38.
    T. TAKASUGI, S. RIKUKAWA and S. HANADA, Acta Metall. Mater. 40 (1992) 1895.Google Scholar
  39. 39.
    W. B. LEE, H. S. YANG, Y.-W. KIM and A. K. MUKHERJEE, Scripta Metall. Mater. 29 (1993) 1403.Google Scholar
  40. 40.
    T. G. LANGDON, Metal Sci. 16 (1982) 175.Google Scholar
  41. 41.
    M. J. STOWELL, Metal Sci. 17 (1983) 1.Google Scholar
  42. 42.
    N. RIDLEY and J. PILLING, in “Superplasticity”, edited by B. Baudelet and M. Suery (Centre Nationale de la Recherche Scientifique, Paris, 1985) p. 8.1.Google Scholar
  43. 43.
    M. SUERY, in “Superplasticity”, edited by B. Baudelet and M. Suery (Centre Nationale de la Recherche Scientifique, Paris, 1985) p. 9.1.Google Scholar
  44. 44.
    B. P. KASHYAP and A. K. MUKHERJEE, Res. Mechanica 17 (1986) 293.Google Scholar
  45. 45.
    J. PILLING and N. RIDLEY, Res. Mechanica 23 (1988) 31.Google Scholar
  46. 46.
    M. J. STOWELL, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 321.Google Scholar
  47. 47.
    J. N. GREENWOOD, D. R. MILLER and J. W. SUITER, Acta Metall. 2 (1954) 250.Google Scholar
  48. 48.
    R. W. BALLUFFI and L. L. SEIGLE, Acta Metall. 3 (1955) 170.Google Scholar
  49. 49.
    J. INTRATER and E. S. MACHLIN, Acta Metall. 7 (1959) 140.Google Scholar
  50. 50.
    R. D. GIFKINS, Acta Metall. 4 (1956) 98.Google Scholar
  51. 51.
    C. W. CHEN and E. S. MACHLIN, Acta Metall. 4 (1956) 655.Google Scholar
  52. 52.
    C. W. CHEN and E. S. MACHLIN, Trans. Met. Soc. 209 (1957) 829.Google Scholar
  53. 53.
    J. E. HARRIS, Trans. Met. Soc. 233 (1965) 1509.Google Scholar
  54. 54.
    R. RAJ and M. F. ASHBY, Acta Metall. 23 (1975) 653.Google Scholar
  55. 55.
    R. RAJ, Acta Metall. 26 (1978) 995.Google Scholar
  56. 56.
    A. S. ARGON, I.-W. CHEN and C. W. LAU, in “Creep fatigue environment interactions”, edited by R. M. Pelloux and N. S. Stoloff (AIME, New York, 1980) p. 46.Google Scholar
  57. 57.
    H. RIEDEL, Acta Metall. 32 (1984) 313.Google Scholar
  58. 58.
    J. P. HIRTH and W. D. NIX, Acta Metall. 33 (1985) 359.Google Scholar
  59. 59.
    L. C. LIM, Acta Metall. 35 (1987) 1663.Google Scholar
  60. 60.
    L. C. LIM, Acta Metall. 37 (1989) 969.Google Scholar
  61. 61.
    A. H. CHOKSHI and A. K. MUKHERJEE, in “Superplasticity and superplastic forming”, edited by C.H. Hamilton and N. E. Paton (TMS-AIME, Warrendale, PA, 1988) p. 149.Google Scholar
  62. 62.
    Z. R. LIN, A. H. CHOKSHI and T. G. LANGDON, J. Mater. Sci. 23 (1988) 2712.Google Scholar
  63. 63.
    E. SMITH and J. T. BARNBY, Metal Sci. J. 1 (1967) 1.Google Scholar
  64. 64.
    A. N. STROH, Proc. R. Soc. A232 (1955) 548.Google Scholar
  65. 65.
    R. G. FLECK, D. M. R. TAPLIN and C. J. BEEVERS, Acta Metall. 23 (1975) 415.Google Scholar
  66. 66.
    X. G. JIANG, J. Z. CUI and L. X. MA, Acta Metall. Mater. 41 (1993) 539.Google Scholar
  67. 67.
    C. H. CACERES and S. P. SILVETTI, Acta Metall. 35 (1987) 897.Google Scholar
  68. 68.
    A. NEEDLEMAN and J. R. RICE, Acta Metall. 28 (1980) 1315.Google Scholar
  69. 69.
    A. H. CHOKSHI and A. K. MUKHERJEE, Acta Metall. 37 (1989) 3007.Google Scholar
  70. 70.
    K. S. CHAN, R. A. PAGE and J. LANKFORD, Acta Metall. 34 (1986) 2361.Google Scholar
  71. 71.
    G. EGGELER, J. C. EARTHMAN, N. NILSVANG and B. ILSCHNER, Acta Metall. 37 (1989) 49.Google Scholar
  72. 72.
    A. H. CHOKSHI, Metall. Trans. 18A (1987) 63.Google Scholar
  73. 73.
    D. W. LIVESEY and N. RIDLEY, J. Mater. Sci. 17 (1982) 2257.Google Scholar
  74. 74.
    M. G. ZELIN, H. S. YANG, R. Z. VALIEV and A. K. MUKHERJEE, Metall. Trans. 24A (1993) 417.Google Scholar
  75. 75.
    A. H. CHOKSHI and T. G. LANGDON, in “Superplasticity”, edited by B. Baudelet and M. Suery (CNRS, Paris, 1985) p. 2.1.Google Scholar
  76. 76.
    T. KAINUMA, A. ARIELI and A. K. MUKHERJEE, in “Deformation of polycrystals: Mechanisms and microstructures”, edited by N. Hansen, A. Horsewell, T. Leffers and H. Lilholt (Risø National Laboratory, Roskilde, Denmark, 1980) p. 315.Google Scholar
  77. 77.
    W. J. CLEGG, J. A. ROOUM and A. K. MUKHERJEE, in “Strength of metals and alloys”, Vol. 2, edited by R. C. Gifkins (Pergamon Press, Oxford, 1983) p. 689.Google Scholar
  78. 78.
    C. I. SMITH and N. RIDLEY, Metals Tech. 1 (1974) 191.Google Scholar
  79. 79.
    C. W. HUMPHRIES and N. RIDLEY, J. Mater. Sci. 9 (1974) 1429.Google Scholar
  80. 80.
    C. VAN RIET and P. DE MEESTER, Scripta Metall. 9 (1985) 795.Google Scholar
  81. 81.
    K. T. PARK, SUSAN YANG, J. C. EARTHMAN and F. A. MOHAMED, Mater. Sci. Engng (in press).Google Scholar
  82. 82.
    R. B. VASTAVA and T. G. LANGDON, Acta Metall. 27 (1979) 251.Google Scholar
  83. 83.
    D. L. HOLT, Trans. AIME 242 (1968) 25.Google Scholar
  84. 84.
    D. LEE, Acta Metall. 17 (1969) 1057.Google Scholar
  85. 85.
    K. MATSUKI, Y. UENO and M. YAMADA, J. Jpn. Inst. Metals 38 (1974) 219.Google Scholar
  86. 86.
    O. A. KAIBYSHEV, R. Z. VALIEV and V. V. ASTANIN, Phys. Status Solidi (A) 35 (1976) 403.Google Scholar
  87. 87.
    K. MATSUKI, H. MORITA, M. YAMADA and Y. MURAKAMI, Metal Sci. 11 (1977) 156.Google Scholar
  88. 88.
    I. I. NOVIKOV, V. K. PORTNOY and T. E. TEREN-TIEVA, Acta Metall. 25 (1977) 1139.Google Scholar
  89. 89.
    M. J. MAYO and W. D. NIX, Acta Metall. 36 (1988) 2183.Google Scholar
  90. 90.
    M. J. MAYO and W. D. NIX, Acta Metall. 37 (1989) 1121.Google Scholar
  91. 91.
    R. Z. VALIEV and T. G. LANGDON, Acta Metall. Mater. 41 (1993) 949.Google Scholar
  92. 92.
    T. G. LANGDON, Mater. Sci. Engng. A166 (1993) 67.Google Scholar
  93. 93.
    T. G. LANGDON, Mater. Sci. Engng. A137 (1991) 1.Google Scholar
  94. 94.
    D. W. LIVESEY and N. RIDLEY, J. Mater. Sci. 13 (1978) 825.Google Scholar
  95. 95.
    C. I. SMITH, B. NORGATE and N. RIDLEY, Metal Sci. 10 (1976) 182.Google Scholar
  96. 96.
    D. J. LIOYD and D. M. MOORE, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 147.Google Scholar
  97. 97.
    K.-T. PARK and F. A. MOHAMED, Metall. Trans. 21A (1990) 2605.Google Scholar
  98. 98.
    F. A. MOHAMED, J. Mater. Sci. 18 (1983) 582.Google Scholar
  99. 99.
    M. SUERY and B. BAUDELET, in “Superplastic forming of structural alloys”, edited by N. E. Paton and C. H. Hamilton (TMS-AIME, Warrendale, PA, 1982) p. 105.Google Scholar
  100. 100.
    S. SAGAT, P. BLENKINSOP, and D. M. R. TAPLIN, J. Inst. Metals 100 (1972) 268.Google Scholar
  101. 101.
    G. L. DUNLOP, E. SHAPIRO, D. M. R. TAPLIN and J. CRANE, Metall. Trans. 4 (1973) 2039.Google Scholar
  102. 102.
    S. SAGAT and D. M. R. TAPLIN, Acta Metall. 24 (1976) 307.Google Scholar
  103. 103.
    N. RIDLEY, D. W. LIVESEY and A. K. MUKHERJEE, J. Mater. Sci. 19 (1984) 1321.Google Scholar
  104. 104.
    N. RIDLEY, D. W. LIVESEY and A. K. MUKHERJEE, Metall. Trans. 15A (1984) 1443.Google Scholar
  105. 105.
    C. W. HUMPHRIES and N. RIDLEY, J. Mater. Sci. 9 (1974) 1429.Google Scholar
  106. 106.
    D. HULL and R. E. RIMMER, Phil. Mag. 4 (1959) 573.Google Scholar
  107. 107.
    M. V. SPEIGHT and W. BEERE, Metal Sci. 9 (1975) 190.Google Scholar
  108. 108.
    W. BEERE and M. V. SPEIGHT, Metal Sci. 12 (1978) 172.Google Scholar
  109. 109.
    M. V. SPEIGHT and J. E. HARRIS, Metal Sci. J. 1 (1967) 83.Google Scholar
  110. 110.
    A. H. CHOKSHI, J. Mater. Sci. 21 (1986) 2073.Google Scholar
  111. 111.
    Y. MA and T. G. LANGDON, Scripta Metall. et Mater. 26 (1992) 1239.Google Scholar
  112. 112.
    A. H. CHOKSHI and T. G. LANGDON, Acta Metall. 35 (1987) 1089.Google Scholar
  113. 113.
    D. A. MILLER and T. G. LANGDON, Metall. Trans. 10A (1979) 1869.Google Scholar
  114. 114.
    Y. MA and T. G. LANGDON, Mater. Res. Soc. Symp. Proc. 196 (1990) 39.Google Scholar
  115. 115.
    J. W. HANCOCK, Metal Sci. 10 (1976) 319.Google Scholar
  116. 116.
    M. J. STOWELL, Metal Sci. 14 (1980) 267.Google Scholar
  117. 117.
    A. C. F. COCKS and M. F. ASHBY, Metal Sci. 16 (1982) 465.Google Scholar
  118. 118.
    M. J. STOWELL, D. W. LIVESEY and N. RIDLEY, Acta Metall. 32 (1984) 35.Google Scholar
  119. 119.
    J. W. HANCOCK, Metal Sci. 12 (1978) 172.Google Scholar
  120. 120.
    Y. MA and T. G. LANGDON, in “Superplasticity and superplastic forming”, edited by C. H. Hamilton and N. E. Paton (TMS-AIME, Warrendale, PA, 1988) p. 173.Google Scholar
  121. 121.
    J. PILLING, Mater. Sci. Tech. 1 (1985) 461.Google Scholar
  122. 122.
    X. G. JIANG, J. Z. CUI and L. X. MA, Mater. Sci. Engng. A174 (1994) L9.Google Scholar
  123. 123.
    R. G. FLECK, C. J. BEEVERS and D. M. R. TAPLIN, Metal Sci. 9 (1975) 49.Google Scholar
  124. 124.
    X. G. JIANG, J. Z. CUI and L. X. MA, Mater. Res. Soc. Symp. Proc. 196 (1990) 373.Google Scholar
  125. 125.
    W. B. MORRISON, Trans. Met. Soc. AIME 242 (1968) 2221.Google Scholar
  126. 126.
    M. A. BURKE and W. D. NIX, Acta Metall. 33 (1975) 793.Google Scholar
  127. 127.
    E. W. HART, Acta Metall. 15 (1967) 351.Google Scholar
  128. 128.
    LIU QIN, Metall. Trans. 17A (1986) 685.Google Scholar
  129. 129.
    B. B. MANDELBROT, “The fractal geometry of nature” (Freeman, New York, 1983).Google Scholar
  130. 130.
    B. B. MANDELBROT, D. E. PASSOJA and A. L. PAUL-LAY, Nature, Lond. 308 (1984) 721.Google Scholar
  131. 131.
    C. S. PANDE, L. E. RICHARDS, N. LOUAT, B. D. DEM-PSEY and A. J. SCHOEBLE, Acta Metall. 35 (1987) 1633.Google Scholar
  132. 132.
    K. BANERJI, Metall. Trans. 19A (1988) 961.Google Scholar
  133. 133.
    J. C. M. LI, Scripta Metall. 22 (1988) 837.Google Scholar
  134. 134.
    R. H. DAUSKARDT, F. HAUBENSAK and R. O. RITCHIE, Acta Metall. Mater. 38 (1990) 143.Google Scholar
  135. 135.
    K. K. RAY and G. MANDAL, Acta Metall. Mater. 40 (1992) 463.Google Scholar
  136. 136.
    X. G. JIANG, J. Mater. Sci. Lett. 11 (1992) 1379.Google Scholar
  137. 137.
    X. G. JIANG, W. Y. CHU and C. M. HSIAO, Acta Metall. Mater. 42 (1994) 105.Google Scholar
  138. 138.
    X. G. JIANG, J. Z. CUI and L. X. MA, Acta Metall. Mater. 40 (1992) 1267.Google Scholar
  139. 139.
    X. G. JIANG, J. Z. CUI and L. X. MA, J. Mater. Sci. Lett. 12 (1993) 1618.Google Scholar
  140. 140.
    F. A. MOHAMED, M. M. I. AHMED and T. G. LAN-GDON, Metall. Trans. 8A (1977) 933.Google Scholar
  141. 141.
    T. G. NIEH and J. WADSWORTH, Scripta Met. Mater. 24 (1990) 763.Google Scholar
  142. 142.
    P. SHARIAT and T. G. LANGDON, in Proceedings of the ISTFA 1985, ATFA, Torrance, CA, 1985, p. 289.Google Scholar
  143. 143.
    K. HIGASHI, T. OHNISHI and Y. NAKATANI, Scripta Met. 19 (1985) 821.Google Scholar
  144. 144.
    T. G. LANGDON, JOM 42 (1990) 8.Google Scholar
  145. 145.
    O. D. SHERBY and J. WADSWORTH, Progr. Mater. Sci. 33 (1989) 169.Google Scholar
  146. 146.
    T. G. NIEH and J. WADSWORTH, Acta Metall. Mater. 39 (1991) 3037.Google Scholar
  147. 147.
    A. H. CHOKSHI, A. K. MUKHERJEE and T. G. LANGDON, Mater. Sci. Engng. R10 (1993) 237.Google Scholar
  148. 148.
    I.-W. CHEN and L. A. XUE, J. Amer. Ceram. Soc. 73 (1990) 2585.Google Scholar
  149. 149.
    W. J. KIM, J. WOLFENSTINE and O. D. SHERBY, Acta Metall. Mater. 39 (1991) 199.Google Scholar
  150. 150.
    A. VARLOTEAUX, J. J. BLANDIN and M. SUERY, Mater. Sci. Tech. 5 (1989) 1109.Google Scholar
  151. 151.
    C. C. BAMPTON and R. RAJ, Metall. Trans. 13A (1982) 1721.Google Scholar
  152. 152.
    C. C. BAMPTON and R. RAJ, Acta Metall. 30 (1982) 2043.Google Scholar
  153. 153.
    J. PILLING and N. RIDLEY, Acta Metall. 34 (1986) 669.Google Scholar
  154. 154.
    H. CONRAD, W. D. CAO, X. P. LU and A. F. SPRECHER, Mater. Sci. Engng. A138 (1991) 247.Google Scholar

Copyright information

© Chapman & Hall 1994

Authors and Affiliations

  • Xing-Gang Jiang
    • 1
  • James C. Earthman
    • 1
  • Farghalli A. Mohamed
    • 1
  1. 1.Materials Section, Department of Mechanical and Aerospace EngineeringUniversity of CaliforniaIrvineUSA

Personalised recommendations