1. A Review of Challenges for Wire and Arc Additive Manufacturing (WAAM)

   • Lei Huang
   • Xizhang Chen
   • Irina Panchenko

   Review 06 January 2023 Pages: 1123 - 1139

   

2. A Review on CDM-Based Ductile Models and its Application

   • Abhinav Gautam
   • R. K. Yadav
   • V. K. Rajak

   Review 10 November 2022 Pages: 1141 - 1154

   

3. Phase Change Materials for Solar Energy Applications

   • Adil Wazeer
   • Apurba Das
   • Shrikant Vidya

   Review 07 January 2023 Pages: 1155 - 1163

   

4. High-Temperature Rheological Behavior and Composition Design of Hf-Be-Ti-Zr-Cu-Ni High-Entropy Amorphous Alloy

   • Jinbei Zhao
   • Bing Li
   • Xi Wang

   Original Article 02 December 2022 Pages: 1165 - 1174

   

5. In Situ Temperature Measurement Across the Sinter Bed

   • Tathagata Ray
   • Debanik Mitra
   • Prabal Patra

   Original Article 03 December 2022 Pages: 1175 - 1189

   

6. Systematic Study of Some Parameters in Smart Strippable Polymeric Coating as Nuclear Decontaminated Agents

   • Saeedeh Kholqi
   • Meysam Torab Mostaedi
   • Hamze Foratirad

   Original Article 06 December 2022 Pages: 1191 - 1197

   

7. Nonlinear Deformation of Fe, FeSi and FeCrSi with BCC Structure Under Pressure

   • Hoc Quang Nguyen
   • Hien Duc Nguyen

   Original Article 07 December 2022 Pages: 1199 - 1209

   

8. Freeze-Casted Porous Lamellar-Structured Alumina Ceramics and Polymer-Infiltrated Composites: Synergistic Enhancement of Structural Properties

   • Prashant Dixit
   • Bhupender Rawal
   • B. Praveen Kumar

   Original Article 12 December 2022 Pages: 1211 - 1219

   

9. Mn and Pb in Waste Rocks from Manganese Mining Areas: Speciation and Kinetic Characteristics

   • Xin Wang
   • Bozhi Ren
   • Yingying Zhou

   Original Article 19 December 2022 Pages: 1221 - 1227

   

10. Prediction of Age Hardening Parameters for Nickel Aluminium Bronze by Artificial Neural Network and Genetic Algorithm

    • Saghar Fooladimahani
    • Seyed Ali Razavi
    • Fakhreddin Ashrafizadeh

    Original Article 19 December 2022 Pages: 1229 - 1236

    

11. Assessment of Biocompatibility and Physical Properties of Ni–Ti–Zr–Nb Shape Memory Alloys

    • S. S. Abdullah
    • E. Balci
    • F. Dagdelen

    Original Article 20 December 2022 Pages: 1237 - 1242

    

12. Evaluation of the Parametric Effects of Separation of Coal in Vibration Separator Using Plackett–Burman Design of Experiments

    • Bharath Kumar Shanmugam
    • Harsha Vardhan
    • Harish Hanumanthappa

    Original Article 20 December 2022 Pages: 1243 - 1252

    

13. Comparison of Compressive Strength of Fly Ash Bonded Flue Dust Briquettes with that of Briquettes made with Bentonite, Sodium Silicate, Lime, Starch, Pitch, Molasses and Dextrin Binder

    • Ritwik Das
    • Manas Kumar Mondal
    • Susanta Pramanik

    Original Article 21 December 2022 Pages: 1253 - 1262

    

14. Characterization of Plasma Sprayed Mn_1.0Co_1.9Fe_0.1O₄ Coating on Crofer 22 APU Interconnect for Solid Oxide Fuel Cell Application

    • M. Naik
    • B. Rajasekaran

    Original Article 23 December 2022 Pages: 1263 - 1269

    

15. Influences of Heat Input on the Geometric Parameters and Element Distribution of CrMnFeCoNi High-Entropy Alloy Coating on Aluminum Alloy Using Laser Cladding

    • Chao Chen
    • Xinyue Cong
    • Huijing Zhang

    Original Article 24 December 2022 Pages: 1271 - 1280

    

16. 10XSBF Bone-Like Hydroxyapatite Coating of Ti–6Al–4V with Microwave Irradiation and its Antibacterial Properties

    • Ecenaz Merve Namlı
    • Mustafa Dolaz
    • Ashabil Aygan

    Original Article 25 December 2022 Pages: 1281 - 1290

    

17. Effect of Oscillating Patterns on the Weld Formation, Microstructure, and Tensile Properties of 1.7-mm Recrystallized Niobium Sheets

    • Jia Tao
    • Jiefeng Wu
    • Zhenfei Liu

    Original Article 30 December 2022 Pages: 1291 - 1301

    

18. Research on Pulsed Triple-Wire Gas Indirect Arc Welding Process Based on Arc Deflection Behavior

    • Chenghui Hu
    • Xinghua Wang
    • Zhaodong Zhang

    Original Article 30 December 2022 Pages: 1303 - 1312

    

19. Experimental Investigation of the Hydrophobic and Modal Properties of Epoxy Nanocomposites Reinforced with Graphene Nanofillers

    • A. N. Shankar
    • Mattipally Prasad
    • J. Sivakumar

    Original Article 02 January 2023 Pages: 1313 - 1319

    

20. Steel Plant Wastes as a Resource of Rare Earth Elements and Rare Metals–Characterisation, Resource Estimation, and Economic Assessment

    • Abhilash
    • Pratima Meshram
    • Subhadra Sen

    Original Article 03 January 2023 Pages: 1321 - 1330

    

21. WAAM of Al–Cu Alloy: Effect of Cooling and Remelting on Grain Size and Mechanical Properties

    • Atosh Kumar Sinha
    • Susanta Pramanik
    • Krishna P. Yagati

    Original Article 04 January 2023 Pages: 1331 - 1339

    

22. Nickel Recovery Optimization and Kinetic Study of Morowali Laterite Ore

    • Gyan Prameswara
    • Flaviana Yohanala Prista Tyassena
    • Himawan Tri Bayu Murti Petrus

    Original Article 04 January 2023 Pages: 1341 - 1348

    

23. Keyhole and Conduction Mode of Welding AISI 304HCu: A Comparison

    • P. G. Sam Infant Jones
    • S. Rajakumar
    • V. Balasubramanian

    Original Article 05 January 2023 Pages: 1349 - 1358

    

24. Determination and Characterization of Heat Input, Microstructure and Performance in Cold Metal Transfer Weld-Brazing of Dissimilar AA6061-T6 to SS304 Sheets

    • Ming Zhao
    • Xiao Wang
    • Hongyuan Chen

    Original Article 07 January 2023 Pages: 1359 - 1369

    

25. Experimental Investigation of Wire Arc Additively Manufactured Inconel 625 Superalloy

    • Uğur Gürol
    • Mustafa Tümer
    • Savas Dilibal

    Original Article 07 January 2023 Pages: 1371 - 1379