Tuning the porosity of ionic covalent triazine frameworks using auxiliary monomers for highly efficient CO2 and I2 capture Guangjuan XuShuran ZhangZhongmin Su Original Paper 02 April 2022 Article: 153
One-pot synthesis of zinc ion coordinated hydroxy-terminated polyurethanes based on low molecular weight polyethylene glycol and toluene diisocyanate LaxmiAdnan ShahzaibNahid Nishat Original Paper 02 April 2022 Article: 152
Investigations on the deblocking reactions of blocked polyisocyanates synthesized from solid waste styrofoam by a non-isocyanate approach and its application in the fabrication of epoxy-polyurethane films Vennila SrinivasanSumalatha VasamSankar Govindarajan Original Paper 01 April 2022 Article: 151
Synthesis & characterization of tri arm Indole based ATRP Polymer and antibacterial study with its silver nanocomposite Ambika SrivastavaShere AfganRavindra Nath Kharwar Original Paper 01 April 2022 Article: 150
A novel stimuli-responsive magnetic hydrogel based on nature-inspired tragacanth gum for chemo/hyperthermia treatment of cancerous cells Ali KhaniMorteza EskandaniMehdi Jaymand Original Paper 31 March 2022 Article: 149
Surface modification of waste silicone rubber via alcoholysis reaction and its application in polypropylene toughening Zhuanglei ZouXinglong AnBaochun Guo Original Paper 31 March 2022 Article: 148
Synthesis of liquid crystal polymers containing cholesterol side groups and investigation of their usability potential as an insulator in organic field effect transistor (OFET) applications Erdinc DoganciFırat KayabasiAyşe Gül Gürek Original Paper 31 March 2022 Article: 147
Preparation of mechanically stripped functionalized multilayer graphene and its effect on thermal conductivity of polyethylene composites Xuyue LiuXiaodong HongJiapeng Long Original Paper 30 March 2022 Article: 146
Comprehensive study of theoretical models for predicting piezoelectric properties parameters of polymeric foams Mahsa DaryadelTaher Azdast Original Paper 29 March 2022 Article: 145
Aramid fibril aerogel from steam-exploded PPTA pulp for thermal insulation Heyi LiQing WangXupin Zhuang Short Communication 28 March 2022 Article: 144
The surface property of PTFE and PVDF liquid marbles Song WangTingting HanBing Yu Original Paper 28 March 2022 Article: 143
Preparation and properties of stable nano interpoymer complex from polycation and polyanion with high density of charge by direct mixing Chuan-Bao WuJian-Yuan HaoXiang-Hui Zeng Original Paper 25 March 2022 Article: 142
Synthesis, characterization and application of chitosan conjugated heterocyclic compounds Atif A. El-GharablyEl-Refaie S. KenawyHamada S. A. Mandour ORIGINAL PAPER Open access 24 March 2022 Article: 141
Morphology and crystallization kinetics of regime transition for biosynthesized polyhydroxyalkanoate Pengwu XuCe ZhangPiming Ma Short Communication 23 March 2022 Article: 140
Synthesis and characterization and some properties of conjugated imine bonding polymers containing pyridine and vinyl units İsmet KayaTolgahan PüskülHatice Karaer Yağmur Original Paper 23 March 2022 Article: 139
Enhancement of semiconducting and thermomechanical properties of materials based on polyaniline and polyvinylpyrrolidone Sad AtiaKhaled ZeggaghZitouni Benabdelghani Original Paper 23 March 2022 Article: 138
Crystallization behavior of biodegradable poly(L-lactic acid) (PLLA)/poly(butylene succinate) (PBS) blends based on in situ simultaneous wide-angle x-ray diffraction/small-angle x-ray scattering techniques and thermal analyses Yasushi KadowakiKen Kojio Original Paper 19 March 2022 Article: 137
Mechanical performance of modified Polypropylene/Polyamide matrix reinforced with treated recycled carbon fibers for lightweight applications Bruno Sena MaiaAmir H. BehraveshMohini Sain Original Paper 17 March 2022 Article: 136
Influence of modified attapulgite on silicone pressure-sensitive adhesives properties Adrian Krzysztof AntosikEdyta MakuchKonrad Gziut Original Paper 17 March 2022 Article: 135
Chain scission by ultrasonication of polycaprolactone with different initial molecular weight and concentration Khairul Anwar IshakMohamad Suffian Mohamad AnnuarMuhammad Haziq Aris Original Paper 16 March 2022 Article: 134
Effect of cellulose nanoparticles from garlic waste on the structural, mechanical, thermal, and dye removal properties of chitosan/alginate aerogels Josué David Hernández-VarelaSilvia Leticia Villaseñor-AltamiranoPilar Morgado Aucar Original Paper 15 March 2022 Article: 133
Correction to: Synthesis of alternating semi-aromatic poly(ester amide)s and the amide transesterification Tingwei HeTao LiuBomou Ma Correction 15 March 2022 Article: 132
Mechanical, viscoelastic and gas transport behaviour of rotationally molded polyethylene composites with hard- and soft-wood natural fibres K. PrasadM. NikzadI. Sbarski Original Paper Open access 15 March 2022 Article: 131
Investigation of polyvinyl alcohol-polyethylene glycol graft copolymer as an advanced functional polymer in the development of perampanel orodispersible film Ashwin J. MaliShivani PatilBothiraja Chellampillai Original Paper 14 March 2022 Article: 130
Neohexene graphitic nanoplatelets for reinforced low-density polyethylene Min Hui KimHyuk-Jun NohIn-Yup Jeon Original Paper 14 March 2022 Article: 129
The use of mussel-inspired polydopamine interlayer for high-efficiency surface functionalization of PET fabrics Abdurrahman TelliMahmut Taş Original Paper Open access 14 March 2022 Article: 128
In situ monitoring of photo-PISA via aggregation-induced emission (AIE) technology Andong ZhangJingyi HaoXinchang Pang Original Paper 14 March 2022 Article: 127
Short‐term creep experiments and modeling on the effect of nano-sized calcium carbonate particles and applied stress on nonlinear viscoelastic behavior of high-density polyethylene Harun SepetciogluBulent Aydemir Original Paper 14 March 2022 Article: 126
Non-isothermal crystallization kinetics of confined poly (ethylene oxide) in electrospun nanofibers prepared from polystyrene/ poly (ethylene oxide) blends Pratick SamantaThangapandian VBhanu Nandan Original Paper 14 March 2022 Article: 125
Applications of polymers in lithium-ion batteries with enhanced safety and cycle life Quoc-Thai PhamChorng-Shyan Chern Review paper 14 March 2022 Article: 124
Composite polyester yarn with photothermal conversion and phase change properties Guizhen KeShuhui ChenWenbin Li Original Paper 14 March 2022 Article: 123
Development of storage bin using lantana camara flour reinforced polypropylene composites: product performance study on the composite bin for pharmaceutical applications Deepaveni SubramaniamRajeswari NatesanBalasivanandha Prabu Shanmugavel Original Paper 12 March 2022 Article: 122
β-cyclodextrin based electrospun nanofibers for arginase immobilization and its application in the production of L-ornithine Ceyhun IşikMustafa Teke Original Paper 12 March 2022 Article: 121
Epoxy resin reinforced with graphene derivatives: physical and dielectric properties Mona Abdel RehimGamal Turky Original Paper Open access 12 March 2022 Article: 120
Influence of acrylonitrile butadiene elastomer as polymeric co-agent for crosslinking poly(vinyl chloride) by gamma radiation Neeraj K. GuptaShivani GuptaAschalew Tedesse Original Paper 12 March 2022 Article: 119
Synthesis of gum acacia-silver nanoparticles based hydrogel composites and their comparative anti-bacterial activity Karanpreet VirkKashma SharmaVijay Kumar Original Paper 11 March 2022 Article: 118
Electron beam irradiation treatment of textiles materials: a review Tarek Abou ElmaatySatoko OkubayashiShahinaz Abouelenin Review paper Open access 11 March 2022 Article: 117
Functionalization of Bio-polymer based nanofibers with clay minerals as nanofillers: promising material for antibacterial applications Ritwika RoyRohi JanP. Gursumeeran Satsangi Original Paper 10 March 2022 Article: 116
Ageing impact on the surface condition of silicone rubber micro nanocomposites adopting AFM studies Pabbati VinodMyneni Sukesh BabuRamanujam Sarathi Original Paper 10 March 2022 Article: 115
Study on the preparation and performance of flexible sulfur dioxide gas sensors based on metal-organic framework Ching-Wen LouXiaoyang ZhangJia-Horng Lin Original Paper 10 March 2022 Article: 114
Adsorption of methyl violet dye from wastewater using poly(methacrylic acid-co-acrylamide)/bentonite nanocomposite hydrogels Hamid SafarzadehSeyed Jamaleddin PeighambardoustSeyed Hadi Peighambardoust Original Paper 08 March 2022 Article: 113
Influence of bio-based chain extender glycerol on the performance of dimer fatty acid-derived polyurethane coatings Pavan M. ParaskarRavindra D. Kulkarni Original Paper 08 March 2022 Article: 112
Donor – acceptor and donor – donor alternating conjugated polymers based on dithieno[3,2-b:2',3'-d]pyrrole: synthesis, optical properties and organic solar cells applications Duong Thanh LeNhung Thanh Thi TruongHa Tran Nguyen Original Paper 04 March 2022 Article: 111
Enhancing clinical applications of PVA hydrogel by blending with collagen hydrolysate and silk sericin Apirujee PunjataewakuptNarendra ReddyPornanong Aramwit Original Paper 03 March 2022 Article: 110
Preparation and physicochemical properties of mwcnt doped polyvinyl chloride / poly (ε-caprolactone) blend Mustafa Ersin PEKDEMİRMediha KÖKYıldırım AYDOĞDU Original paper 03 March 2022 Article: 109
PAN/PVA composite nanofibrous membranes for separating oil-in-water emulsion Hui GuoDong ZhangLanying Jiang Original Paper 02 March 2022 Article: 108
Facile synthesis of highly flexible sodium ion conducting polyvinyl alcohol (PVA)-polyethylene glycol (PEG) blend incorporating reduced graphene-oxide (rGO) composites for electrochemical devices application Mohd SadiqMohammad Moeen Hasan RazaJavid Ali Original Paper 02 March 2022 Article: 107