Skip to main content
SpringerLink
Log in
Book cover

Advances in Material Forming pp 99–124Cite as

Microforming and Nanomaterials

  • Conference paper

Abstract

Micro technology and nano materials are gaining increasing interest in the metal forming community. This can be explained by a large number of new applications and products pushed to market in the past, yielding smaller geometrical dimensions of the final products and thus demanding for smallest components to be manufactured in large quantities. Up to now, most of these parts are being manufactured by machining technology well suited for the production of small series. The analysis of the current market situation shows, that the steadily increasing trend towards smallest products is continuing in the future and thus requesting for new manufacturing technologies for large quantity production. Forming technology seems to be well suited due to its high production output and high accuracy. The aim of this chapter is to give an overview on current research activities related to microforming and nanomaterials technology showing the capabilities and problems. The analysis of the current state will give a hint on existing gaps in knowledge and will finally describe the future demands.

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   84.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. R. Wechsun et al., Nexus Market Analysis for microsystems, 2000-2005. Nexus Task Force Market Analysis. Wicht Technologie Consulting. München, 2002

    Google Scholar 

  2. Maeda, T.: A proposal of developing of super micro-precision press-machine, In: The Japan Society for Technology of Plasticity (publ.): 1989 Annual Report 11(1990) 12–13.

    Google Scholar 

  3. Geiger, M., Kleiner, M., Eckstein, R., Tiesler, N., Engel, U.: Microforming. CIRP Annals 50(2001)2, 445–462

    Google Scholar 

  4. Geiger, M.; Engel, U.: Microforming–a challenge to the plasticity research community. Addressed to the 40th anniversary of the JSTP. Journal of the JSTP 43 (2002) 494, 5–6

    Google Scholar 

  5. Lowe, T.C.; Outlook for manufacturing materials by severe plastic deformation. In Proc. of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation, SPD3, Fukuoka, Japan, September 22–26, 2005; Materials Science Forum 503–504(2006) 355–361

    Google Scholar 

  6. Engel, U.; Eckstein, R.: Microforming–from basic research to its realization. J. Mater. Process. Technol. 125–126(2002) 35–44

    Article  Google Scholar 

  7. Vollertsen, F.; Hu, Z., Schulze Niehoff, H., Theiler, C: State of the art in micro forming. J. Mater. Process. Technol. 151(2004) 70–79

    Article  Google Scholar 

  8. Zhu, Y.T.; Langdon, T.G.: The fundamentals of nanostructured materials processed by severe plastic deformation. JOM 56 (2004) 10, 58–63

    Article  Google Scholar 

  9. Lowe, T.C.; Valiev, R.Z.: The use of severe plastic deformation techniques in grain refinement. JOM 56 (2004) 10, 64–68

    Article  Google Scholar 

  10. http://www.4m-net.org

  11. http://www.masmicro.net

  12. http://www.wtec.org

  13. Pawelski, O.: Beitrag zur Ähnlichkeitstheorie der Umformtechnik. Arch. Eisenhüttenwes. 35 (1964) 1, 27–37

    Google Scholar 

  14. Kals, R.T.A.: Fundamentals on the Miniaturization of Sheet Metal Working Processes. Meisenbach, 1999

    Google Scholar 

  15. Kocanda A.; Prejs, T.: The effect of miniaturization on the final geometry of the bent products. In: Pietrzyk et al. (Eds.): Metall Forming 2000, Proceedings of th 8th International Conference on Metal Forming, Rotterdam, A.A.Balkema, 2000, 375–378

    Google Scholar 

  16. Raulea, L.V.; Govaert, L.E.; Baaijens, F.P.T.: Grain and Specimen Size Effects in Processing Metal Sheets. In: Geiger, M. (Ed.): Advanced Technology of Plasticity 1999. Proceedings of the 6th International Conference on Technology of Plasticity Nuremberg, September 19–24, 1999, Berlin, Springer, Vol. II, 939–944

    Google Scholar 

  17. Geiger, M.; Engel, U.; Vollertsen, F.; Kals, R.; Meßner, A.: Metal Forming of Microparts for Electronics. Production Engineering 2 (1994) 1, 15–18

    Article  Google Scholar 

  18. Geiger, M.; Meßner, A.; Engel, U.: Production of Microparts–Size Effects in Bulk Metal Forming, Similarity Theory. Production Engineering 4 (1997) 1, 55–58

    Google Scholar 

  19. Picard, P.; Michel, J.F.: Characterization of the Constitutive Behaviour for Very Small Components in Sheet Metal Forming. Proceedings of the 2nd ESAFORM Conference on Material Forming, Guimarães, Portugal, 1999, 169–170

    Google Scholar 

  20. Geiger, M.; Meßner, A.; Engel, U.; Kals, R.; Vollertsen, F.: Design of Micro-Forming Processes–Fundamentals, Material Data and Friction Behaviour. In: Standring, P. (edtr.): Chipless 2000–Advancing Chipless Component Manufacture. Proc. of the 9th International Cold Forging Congress, Solihull, England, May 1995. Redhill UK: FMJ Int. Publ. Ltd. 1995. pp 155–164

    Google Scholar 

  21. Engel, U.; Meßner, A.; Geiger, M.: Advanced Concept for the FE-Simulation of Metal Forming Processes for the Production of Microparts. In: Altan T. (Edtr.): Advanced Technology of Plasticity 1996, Proc. of the 5th ICTP, Oct.7–10, 1996, Columbus, Ohio USA, Vol. II, p. 903–907

    Google Scholar 

  22. Geißdörfer, S.; Engel, U.; Geiger, M.: FE-Simulation of Microforming Processes Applying a Mesoscopic Model. Int.J.Mach. Tools and Manuf. 46 (2006) 11, 1222–1226

    Google Scholar 

  23. Geißdörfer, S.; Engel, U.: Mesoscopic Model–Simulation of Size Effects in Microforming. In: Jan Kusiak et al (Edtrs): Proceedings of the 10th International Conference on Metal Forming 2004, Krakow, 19.–23.09.2004, GRIPS’ Sparkling World of Steel Vol. 1: Proceedings, No. 3, GRIPS media GmbH, 2004 pp 699–703

    Google Scholar 

  24. Geißdörfer, S.; Diehl, A.; Eichenhüller, B.; Engel, U.: Microforming–Application and 3D Simulation. In: Teti, R. (Edtr.): CIRP ICME’06–5th CIRP Int. Sem. on Intelligent Computation in Manufacturing Engineering, 25.-28.07.2006, Ischia, Italy, pp 521–526

    Google Scholar 

  25. Engel, U.; Geißdörfer, S.; Geiger, M.: Simulation of Microforming Processes–An Advanced Approach Applying a Mesoscopic Model (invited paper). In: Bariani, P. F. (Ed.): Proceedings of the 8th International Conference on Technology of Plasticity, 9. 13.10.2005, Verona, Italy. Padova, Italy: Edizioni Progretto 2005, pp. 447–448

    Google Scholar 

  26. Mehnert, K.; Klimanek, P.: Grain growth in metals with strong textures: Threedimensional Monte-Carlo simulations, Computational Materials Science 9(1997) 261–266

    Article  Google Scholar 

  27. Ashby M.F.: The deformation of Plastically Non-homogeneous Materials. Philosophical Magazine 21(1970) 399–424.

    Article  Google Scholar 

  28. M.A. Meyers, E. Ashworth, Phil. Mag. A, 1982, 46, 737

    Article  Google Scholar 

  29. Kals, R.T.A.: Fundamentals on the Miniaturization of Sheet Metal Working Processes. Meisenbach, 1999.

    Google Scholar 

  30. Raulea, L.V.; Govaert, L.E.; Baaijens, F.P.T.: Grain and Specimen Size Effects in Processing Metal Sheets. In: Geiger, M. (Ed.): Advanced Technology of Plasticity 1999. Proceedings of the 6th International Conference on Technology of Plasticity Nuremberg, September 19–24, 1999, Berlin, Springer, Vol. II, 939–944

    Google Scholar 

  31. Cavaliere, P.; Gabrielli, F.; Fratini, L.: Bending of very thin sheets: The influence of thickness on material characterisation. In: Pietrzyk et al. (Eds.): Metal Forming 2000. Rotterdam, A.A. Balkema, 2000, 405–410

    Google Scholar 

  32. Kals, T.A.; Eckstein, R.: Miniaturization in sheet metal working. J. Mater. Process. Technol. 103(2000) 95–101

    Article  Google Scholar 

  33. Petch, N.J.: The Cleavage Strength of Polycrystals. J. Iron and Steel Inst. (1953) 25–28

    Google Scholar 

  34. Diehl, A.; Engel, U.; Geiger, M.: Mechanical Properties and bending behaviour of metal foils, In: Dimov, S.; Menz, W.; Fillon, B. (Eds.): Proc. of the 2nd International Conference on Multi-Material Micro Manufacture, 20.09.-22.09.2006, Grenoble, 297–300

    Google Scholar 

  35. Fleck N.A. and Hutchinson J.W.: Strain gradient plasticity. Adv. Appl. Mech. 33 (1997)295–361.

    Google Scholar 

  36. Fleck N.A. and Hutchinson J.W.: A reformulation of strain gradient plasticity. J. Mech. Phys. Sol. 49 (2001) 2245–2271

    Article  MATH  Google Scholar 

  37. Michel J.-F. and Picart P.: Modelling the constitutive behaviour of thin metal sheet using strain gradient theory. J. Mater. Process. Technol. 125–126(2002) 164–169

    Article  Google Scholar 

  38. Leopold, J.: Foundations of Micro-Forming. In: Geiger, M. (Ed.): Advanced Technology of Plasticity 1999. Proceedings of the 6th International Conference on Technology of Plasticity Nuremberg, September 19–24, 1999, Berlin, Springer, Vol. II, 883–888

    Google Scholar 

  39. Raulea, L.V.; Goijaerts, A.M.; Govaert, L.E.; Baaijens, F.T.P.: Size Effects in the Processing of Thin Metal Sheets. In: Geiger, M. et al. (Eds.): Sheet Metal 1999, Proceedings of the International Conference, Bamberg, Meisenbach, 1999, 521–528

    Google Scholar 

  40. Eckstein, R.; Engel, U.: Behavior of the Grain Structure in Sheet Metal Working, In: Pitrzyk, M. et al. (Eds.) Metal Forming 2000, Proceedings of the 8th Internat. Conf. on Metal Forming, Rotterdam, A.A. Balkema, 2000, 453–459

    Google Scholar 

  41. Geiger, M.; Eckstein, R.; Engel, U.: Study of micro sheet metal working processes. Production Engng. 8 (2001) 1, 55–58

    Google Scholar 

  42. Taylor, G.I.: Plastic strain in metals. J. Inst. Met. 21(1938) 307–324

    Google Scholar 

  43. Chen, F.-K-, Tsai, J.-W.: A study of the size effect in micro-forming with microhardness tests. J. Mater. Process. Technol. 177(2006) 146–149

    Article  Google Scholar 

  44. Engel, U.; Messner, A.; Tiesler, N.: Cold Forging of Microparts — Effect of Miniturization on Friction, In: Chenot, J.L. et al (Eds.): Proceedings of the 1st ESAFORM Conf. on Materials Forming, Sophia Antipolis, France, 77–80

    Google Scholar 

  45. Tiesler, N.; Engel, U.; Geiger, M.: Forming of Microparts–Effects of Miniaturization on Friction, In: Geiger, M. (Ed.): Advanced Technol. of Plasticity, Proc. Of the 6th Int. Conf. on Technology of Plasticity ICTP 1999, 19–24 Sep 1999, Nuremberg, Germany, Berlin, Springer, Vol. II, 889–894

    Google Scholar 

  46. Geiger, R.: Der Stofffluß beim kombinierten Napffließpressen. Berichte aus dem Institut für Umformtechnik der Universität Stuttgart Nr. 36, Verlag Girardet Essen, 1976

    Google Scholar 

  47. Buschhausen, A.; Weinmann, K.; Lee, J.Y.; Altan, T.: Evaluation of lubrication and friction in cold forging using a double backward-extrusion process. J. Mater. Process. Technol. 33(1992)95–108

    Article  Google Scholar 

  48. Engel, U.: Tribology in Microforming. Wear 260(2006) 265–273

    Article  Google Scholar 

  49. Bay, N.: Friction stress and normal stress in bulk metal forming processes. J. Mech. Work. Technol. 14 (1987) 2, 203

    Article  Google Scholar 

  50. Presz, W.: The influence of punch vibration on surface phenomena in micro-extrusion. Proceedings of ESAFORM 2006 Conference, Glasgow, 583–586

    Google Scholar 

  51. Presz, W.: Flexible Manufacturing System For Vibration Assisted Microforming. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007, accepted

    Google Scholar 

  52. Krishnan, N.; Cao, J.; Dohda, K.: Microforming: Study of friction conditions and the impact of low friction / high-strength die coatings on the extrusion of micropins. Proc. IMECE 2005, ASME Int. Mech. Engng. Conf., Nov 5–11, 2005, Orlando, FL, MED 16 (2005) 1, 331–340

    Google Scholar 

  53. Engel, U.; Tiesler, N.; Eckstein, R.: Microparts–A challenge for forming technology. In: Kuzman, K. (edtr): ICIT 2001 3rd Int. Conf. on Industrial Tools, Celje Slovenia: Tecos 2001, 31–39

    Google Scholar 

  54. Engel, U.; Egerer, E.: Basic research on cold and warm forging of microparts. Key Engng. Mater. 233–236(2002)449–456

    Google Scholar 

  55. Egerer, E.; Engel, U.: Process Characterization and Material Flow in Microforming at Elevated Temperatures. J. Manufacturing Processes 6 (2004) 1, 11–16

    Google Scholar 

  56. Ike, H.; Plancak, M.: Controlling metal flow of surface microgeometry in coining process, In: Geiger, M. (edtr): Advanced Technology of Plasticity, Proc. Of the 6th Int. Conf. on Technology of Plasticity ICTP 1999, 19–24 Sep 1999, Nuremberg, Germany. Vol. II, Berlin: Springer 1999, pp 907–912

    Google Scholar 

  57. Thome, M.; Hirt, G.; Ellert, J.: Metal Flow and Die Filling in Coining of Microstructures with and without Flash, In: Proc. of the International Conference on Sheet Metal 05, 2005, pp. 631–639

    Google Scholar 

  58. Schubert, A.; Burkhardt, T.; Kadner, J.; Neugebauer, R.: High Precision Embossing of Metallic Parts with Microstructure. In; McKeown, P. et al (Eds.): Precision engineeringnanotechnology. Proceedings of the 1 st International Euspen Conference, Aachen, Shaker, 1999, Vol.. I, 530–533

    Google Scholar 

  59. Schubert, A.; Böhm, J.; Burkhardt, T.: Mikroprägen–Herstellen metallischer Mikrostukturbauteile durch Kaltprägen, wt 90 (2000) 11/12, 479–483

    Google Scholar 

  60. Ike, H.; Plancak, M.: Coining process as a means of controlling surface microgeometry. J. Mater. Process. Technol. 80–81(1998) 101–107

    Article  Google Scholar 

  61. Wang, C.J.; Shan, D.B.; Zhou, J.; Guo, B.; Sun, L.N.: Size effects of the cavity dimension on the microforming ability during coining process. J. Mater. Process. Technol. (2006), doi: 10.1016/j.jmatprotec.2006.11.055 in press

    Google Scholar 

  62. Lee, W.B.; Cheung, CF.; Chan, L.K.; Chiu, W.M.: An investigation of process parameters in the dambar cutting of integrated circuit packages. J. Mater. Process. Technol. 66(1997)63–72

    Article  Google Scholar 

  63. Cheung, CF.; Lee, W.B.; Chiu, W.M.: An investigation of tool wear in the dam-bar cutting of integrated circuit packages. Wear 237(2000) 274–282

    Article  Google Scholar 

  64. Jimma, T.; Sekine, F.; Sato, A.: Effects of Dynamic Behavior of Tools on Blanking of Electronic Machine Parts, In: Advanced Techn. of Plast., Vol. 3, 1990, 1459–1464

    Google Scholar 

  65. Doege, E.: Optimierung von Mikroschneidverfahren zur Herstellung von Kontakten für die Halbleitertechnik. Report, DO 190 / 96-1, DFG, Hannover, 1996

    Google Scholar 

  66. Brinksmeier, E.; Riemer, O.: Metal cutting of microstructures, In: Menz, W.; Dimov, S.: 4M2005, Proc. 1st Int. Conf. on Multi-Material Micro Manufacture, 29.06.-01.07.2005, Karlsruhe. London: Elsevier 2005, pp. 19–25

    Google Scholar 

  67. Fleischer, J.; Kotschenreuther, J.: Manufacturing of Micro Molds by Conventional and Energy Assisted Processes, In: Menz, W.; Dimov, S.: 4M2005, Proc. 1st Int. Conf. on Multi-Material Micro Manufacture, 29.06.-01.07.2005, Karlsruhe. London: Elsevier 2005, pp. 9–18

    Google Scholar 

  68. Uriarte, L.; Ivanov, A.; Oosterling, H.; Staemmler, L.; Tang, P.T.; Allen, D.: A Comparison between Microfabrication Technologies for Metal Tooling. In: Menz, W.; Dimov, S.: 4M2005, Proc. 1st Int. Conf. on Multi-Material Micro Manufacture, 29.06.-01.07.2005, Karlsruhe. London: Elsevier 2005, pp 351–354

    Google Scholar 

  69. Hesselbach, J. et al.: International State of the Art of Micro Production Technology. Annals of the WGP, Production Engineering 10 (2004) 1, 29–36

    Google Scholar 

  70. Dimov, S.; Pham, D.T.; Ivanov, A.; Popov, K.: Micro milling of tInn features, In: Menz, W.; Dimov, S.: 4M2005, Proc. 1st Int. Conf. on Multi-Material Micro Manufacture, 29.06.-01.07.2005, Karlsruhe. London: Elsevier 2005, pp 363–366

    Google Scholar 

  71. Hesselbach, J. et al.: mikroPRO — Untersuchung zum internationalen Stand der Mikroproduktionstechnik, Schriftenreihe des Instituts für WerkzeugmascInnen und Fertigungstechnik der TU Braunschweig, 2002

    Google Scholar 

  72. Brinksmeier, E.; Dong, J.; Gläbe, R.: Diamond Turning of Steel Molds for Optical Applications, In: Proceedings of the 4th International Conference of the euspen, Glasgow, 2004, pp. 155ff

    Google Scholar 

  73. Masuzawa, T.: State of the Art of MicromacInning. CIRP Annals 49 (2000) 2, 473–488

    Google Scholar 

  74. Gillner, A.; Hellrung, D. (Eds.): Produktionstechnik zum Mikrostanzen und Mikroprägen metallischer Bauteile. Abschlußbericht des Verbundprojektes PROMPT. Forschungszentrum Karlsruhe, 1999

    Google Scholar 

  75. Wolf, A.; Ehrfeld, W.; Gruber, H.P.: Mikrofunkenerosion für den Präzisionsformenbau. wt Werkstattstechnik 89 (1999) 11/12, 499–502

    Google Scholar 

  76. http://www.agiesales.com

  77. Eriksen, R. S.; M. Arentoft and N.A. Paldan: Tool Design and Manufacturing for Bulk Forming of Micro Components. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007, accepted

    Google Scholar 

  78. Erhardt, R.; Schepp, F.; Schmoeckel, D.: Micro Forming with Local Part Heating by Laser Irradiation in Transparent Tools, In: Geiger, M. et al. (Eds.): Sheet Metal 1999, Proc. of the 7th Int. Conf. on Sheet Metal, SheMet’99. Bamberg, Meisenbach 1999, 497–504

    Google Scholar 

  79. Hellrung, D.; Scherr, S.: Zuverlässige Herstellung miniaturisierter Prägewerkzeuge, wt Werkstattstechnik 90 (2000) 11/12, 520–521

    Google Scholar 

  80. Saotome, Y.; Inoue, A.: New amorphous alloys as micromaterials and the processing technology. Proc. IEEE The 13th Annual Int. Conf. on Micro Electro Mechanical Systems 2000, 288–292

    Google Scholar 

  81. http://www.wafios.de

  82. http://www.daido-kikai.cojp/pdf/mini_casetto.pdf

  83. Hess, A.: Piezo-hydraulischer Aktor für die Mikrobearbeitung von Metallen, In: Berichte aus dem Institut für Konstruktion und Fertigung in der Feinwerktechnik, Dissertation, Stuttgart, 2001

    Google Scholar 

  84. Schepp, F.: Linearmotorgetriebene Pressen für die Stanztechnik. In: Berichte aus Produktion und Umformtechnik, Schmoeckel, D. (Edtr.), Dissertation, Darmstadt, Shaker Verlag, 2001

    Google Scholar 

  85. M. Arentoft, N.A. Paldan: “Production equipment for manufacturing of micro metal components”, 9th ESAFORM 2006, Glasgow, UK, pp 579–582

    Google Scholar 

  86. Paldan, N.A.; M. Arentoft, R.S. Eriksen: Production Equipment and Processes for Bulk Formed Micro Components. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007, accepted

    Google Scholar 

  87. Schulze Niehoff, H.; Vollertsen, F.: Entwicklung einer hochdynamischen, zweifachwirkenden Mikroumformpresse. In: Tagungsband des 2. Kolloquium Prozessskalierung, Bremen, 9.-10.11.2005, pp. 105–118

    Google Scholar 

  88. Ashida, K., Mishima, N., Maekawa, H. Tanikawa, T., Kaneko, K. & Tanaka, M.: Development of desktop machining microfactory. Proc. 2000 Japan-USA Flexible Automation Conference, July 23–26, 2000, Ann Arbor, Michigan, USA, pp 175–178

    Google Scholar 

  89. Saotome, Y.; Iwazaki, H.: Superplastic extrusion of microgear shaft of 10 μm in module. J. Microsystem Technol. 4 (2000) 6, 126–129

    Article  Google Scholar 

  90. Geiger, M.; Egerer, E.; Engel, U.: Cross Transport in a multi-station former for microparts. Production Engng. 9 (2002) 1, 101–104

    Google Scholar 

  91. C. Bark, G. Vögele, Th. Weisener, “Bitte nicht berühren–Greifen mit Flüssigkeiten in der Mikrotechnik.”, F&M 104 (1996) 5, 372–374

    Google Scholar 

  92. Mughrabi, H.; Höppel, H.W.; Kautz, M.: Fatigue and Microstructurre of ultrafmegrained metals produced by severe plastic deformation. Viewpoint set 35. Metals and alloys with a structural scale from the micrometer to the atomic dimensions. Scripta Mat. 51 (2004) 807–812

    Article  Google Scholar 

  93. Höppel, H.W.; Kautz, M.; Xu, C; Murashkin, M.; Langdon, T.G.; Valiev, R.Z.; Mughrabi, H.: An Overview: Fatigue lives and cyclic deformation behaviour of ultrafine grained metals and alloys. Int. J. of Fatigue 28 (2006) 9, 1001–1010

    Article  Google Scholar 

  94. Valiev, R.Z.: Mat. Sci. Eng. A234–236(1997) 59–66

    Google Scholar 

  95. Korbel, A.; Richert, M.; Richert, J.: The effects of very high cumulative deformation on structure and mechanical properties of aluminium, In: Proc. 2nd Riso Int. Symp. on Metallurgy and Material Science, Roskilde, Denmark, September 14–18, 1981, pp. 445–450

    Google Scholar 

  96. Varyukhin, V.; Beygelzimer, Y.; Synkov, S.; Orlov, D.: Application of twist extrusionin. In: Proc. of the 3rd International Conference on Nanomaterials by Severe Plastic Deformation, SPD3, Fukuoka, Japan, September 22–26, 2005, Materials Science Forum 503–04(2006) 335–340

    Article  Google Scholar 

  97. Saito, Y.; Tsuji, N.; Utsunomiya, H.; Sakai, T.; Hong, R.G.: Scripta Mater. 39(1998) 1221–1227

    Article  Google Scholar 

  98. Höppel, H.W.; May, J.; Goeken, M.: Enhanced strength and ductility in ultrafineGrained Aluminium Produced by Accumulative Roll Bonding. Adv. Eng. Mat. 6 (2004) 9, 781–784

    Article  Google Scholar 

  99. Ghosh, A.K.; Huang, W.: Severe deformation based process for grain subdivision and resulting microstructures, In: Proc. of the NATO Advanced Research Workshop on Investigations and Applications of Severe Plastic Deformation, Moscow, Russia, August 2–7, 1999, pp. 29–36, Kluwer Academic Publishers, 2000

    Google Scholar 

  100. Huang, J.Y.; Zhu, Y.T; Jiang, H.; Lowe, T.C.: Acta Mater. 49(2001) 1497–1505

    Article  Google Scholar 

  101. Segal, V.M.; Reznikov, V.I.; Drobyshevskiy, A.E.; Kopylov, V.l.: Russ. Metall. (Engl. Transi.) 1(1981) 99–105

    Google Scholar 

  102. Rosochowski, A.; Olejnik, L.: J. Mater. Process. Technol. 125-126(2002) 309–316

    Article  Google Scholar 

  103. Rosochowski A.; Olejnik, L; Richert, M.: 3D-ECAP of square aluminium billets, In: Proc. of the 8th Int. Esaform Conference on Material Forming, Cluj-Napoca, Romania, April 27–29, 2005, pp. 637–640

    Google Scholar 

  104. Rosochowski, A.; Olejnik, L.; Balendra, R.: FEM analysis of two-turn equal channel angular extrusion of cylindrical billets In: Proc. of the 7th Int. Esaform Conference on Material Forming, Trondheim, Norway, April 28–30, 2004, pp. 207–210

    Google Scholar 

  105. Barber, R.E.; Dudo, T.; Yasskin, P.B.; Hartwig, K.T.: Product yield of ECAE processed material. In: Ultrafine Grained Materials III, 2004 TMS Annual Meeting, Charlotte, North Carolina, U.S.A., March 14–18, 2004, pp. 667–672

    Google Scholar 

  106. Segal, V.M.: Mat. Sci. Eng. A386(2004) 269–276

    Google Scholar 

  107. Srinivasan, R.; Chaudhury, P.K.; Cherukuri, B.; Han, Q.; Swenson, D.; Gros, P.: Continuous Plastic Deformation Processing of Aluminum Alloys. Final Technical Report (2006)

    Google Scholar 

  108. Raab, G.I.; Botkin, A.V.; Raab, A.G.; Valiev, R.Z.: New schemes of ECAP processes for producing nanostructured bulk metallic materials. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007

    Google Scholar 

  109. Rosochowski, A.; Olejnik, L.: FEM simulation of incremental shear. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007

    Google Scholar 

  110. Xu, C; Furukawa, M.; Horita, Z.; Langdon, T.G.: Achieving a superplastic forming capability through severe plastic deformation. In: Proc. of the 2nd Conference “Nanomaterials by Severe Plastic Deformation–NANOSPD2”, Vienna, Austria, December 9–13, 2002, pp. 701–710, WILEY-VCH, 2004

    Google Scholar 

  111. Salimgareeva, G.H.; Semenova, I.P.; Latysh, V.V.; Valiev R.Z.: Nanostructuring of Ti in long-sized Ti rods by severe plastic deformation. In: Proc. of the 8th Int. Esaform Conference on Material Forming, Cluj-Napoca, Romania, April 27–29, 2005

    Google Scholar 

  112. Islamgaliev, R.K.; Yunusova, N.F.; Bardinova, M.A.; Soschnikova, E.P.; Krasilnikov, N.A.; Valiev, R.Z.; Schoberth, A.: Microstructure and mechanical properties of UFG Al alloy sheets produced by equal channel angular pressing and warm rolling. In: Proc. of the 9th Int. Esaform Conference on Material Forming, Glasgow, United Kingdom, April 26–28, 2006, pp. 547–550

    Google Scholar 

  113. Mughrabi, H.; Höppel, H.W.; Kautz, M.; Valiev, R.Z.: Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation. Int. J. Mater. Res. 94(2003) 1079–1083

    Google Scholar 

  114. Rosochowski, A.; Presz, W.; Olejnik, L.; Richert, M.: Micro-extrusion of UFG aluminium. In: Menz, W.; Dimov, S. (eds): 4M2005, Proc. 1st Int. Conf. on Mult-Material Micro Manufacture, 29.06.-01.07.2005, Karlsruhe. London: Elsevier 2005, pp. 161–164

    Google Scholar 

  115. Kim, W. J.; Sa, Y.K.: Scripta Mater., 54(2006) 1391–1395

    Article  Google Scholar 

  116. Presz, W.; Rosochowski, A.: The influence of grain size on surface quality of microformed components. In: Proc. of the 9th Int. Esaform Conference on Material Forming, Glasgow, United Kingdom, April 26–28, 2006, pp. 587–590

    Google Scholar 

  117. Popov, K.; Dimov, S.; Pham, D.T.; Minev, R.; Rosochowski, A.; Olejnik, L.; Richert, M.: Micro-extrusion of UFG aluminium. In: Menz, W.; Fillon, B.; Dimov, S. (eds): 4M2006, Proc. 2nd Int. Conf. on Multi-Material Micro Manufacture, Sep 20–22, 2006, Grenoble, France. London: Elsevier 2006, pp. 127–130

    Google Scholar 

  118. Brinksmeier, E.; Osmer, J.; Rosochowski, A.; Olejnik, L.; Richert, M.: Diamond turning of ultrafine grained aluminium alloys. In: Proc. 7th Euespen International Conference, Bremen, May 20–24, 2007

    Google Scholar 

  119. Rosochowski, A.; Olejnik, L.; Roginski, S.; Richert, M.: Micro-EDM of UFG aluminium. In: 4M2007, Proc. 3rd Int. Conf. on Multi-Material Micro Manufacture, Borovets, Bulgaria, Oct 3–5, 2007

    Google Scholar 

  120. Valiev, R.Z.; Estrin, Y.; Raab, G.I.; Janecek, M.; Zi, A.: Processing ultra fine grained net-shaped MEMS parts using severe plastic deformation. In: Proc. of the 10th Int. Esaform Conference on Material Forming, Zaragoza, Spain, April 18–20, 2007

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Chair of Manufacturing Technology, University of Erlangen-Nuremberg, Egerlandstrasse 11, 91058, Erlangen, Germany

    Ulf Engel & Stefan Geißdörfer

  2. Department of Design, Manufacture and Engineering Management, University of Strathclyde, 75 Montrose Street, Glasgow, Gl 1XJ, UK

    Andrzej Rosochowski

  3. Institute of Materials Processing, Warsaw University of Technology, 85 Narbutta Street, 02-524, Warsaw, Poland

    Lech Olejnik

Authors
  1. Ulf Engel
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Andrzej Rosochowski
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Stefan Geißdörfer
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Lech Olejnik
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2007 Springer-Verlag France, Paris

About this paper

Cite this paper

Engel, U., Rosochowski, A., Geißdörfer, S., Olejnik, L. (2007). Microforming and Nanomaterials. In: Advances in Material Forming. Springer, Paris. https://doi.org/10.1007/978-2-287-72143-4_7

Download citation

  • DOI: https://doi.org/10.1007/978-2-287-72143-4_7

  • Publisher Name: Springer, Paris

  • Print ISBN: 978-2-287-72142-7

  • Online ISBN: 978-2-287-72143-4

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation