Abstract
Comb-shaped poly(methyl methacrylate)s (PMMAs) with various mass fractions and various molecular weights of the side chains were prepared by free-radical polymerization followed by atom transfer radical polymerization (ATRP). The rheological properties were characterized in linear-viscoelasticity and in uniaxial extensional flow. Due to branching and thereby slow relaxation of the backbone, significant strain hardening was observed and well analyzed by the molecular stress function (MSF) model. The model parameter f 2max increased with increasing M n,bb at almost constant M n,br and \( \overline{p} \), and with increasing \( \overline{p} \) at almost constant Φ n,br, where M n,bb and M n,br are the number-average molecular weights of the backbone and the branched chains, and \( \overline{p} \) and Φ n,br are the average number per backbone and the number-average mass fraction of the branched chains, respectively. These results provide guidelines for the polymer design with the aim of enhancing strain hardening in elongational flow.
Similar content being viewed by others
References
Doi M, Edwards SF (1978) Dynamic of concentrated polymer systems. Part 2. Molecular motion under flow. J Chem Soc, Faraday Trans II 74:1802–1817
Doi M, Edwards SF (1979) Dynamic of concentrated polymer systems. Part 4. Rheological properties. J Chem Soc, Faraday Trans II 75:38–54
Ferry JD (1980) Viscoelastic properties of polymers, 3rd edn. Wiley, New York
Fuchs K, Friedrich C, Weese J (1996) Viscoelastic properties of narrow-distribution poly(methyl methacrylates). Macromolecules 29:5893–5901
Kakuda M, Takahashi T, Koyama K (2006) Elongational viscosity of polymer composite including hydrophilic or hydrophobic silica nano-particles. Nihon Reoroji Gakkaishi 34:181–184
Linster JJ, Meissner J (1989) Melt elongation of a commercial poly(methyl methacrylate) product and a commercial polystyrene. Makromol Chem 190:599–611
Liu Q, Zhao P, Chen Y (2007) Divergent synthesis of dendrimer-like macromolecules through a combination of atom transfer radical polymerization and click reaction. J Polym Sci A 45:3330–3341
Marrucci G, Hermans JJ (1980) Nonlinear viscoelasticity of concentrated polymer liquids. Macromolecules 13:380–387
Matyjaszewski K, Gaynor SG, Kulfan A, Podwika M (1997) Preparation of hyperbranched polyacrylates by atom transfer radical polymerization. 1. Acrylic AB* monomers in “living” radical polymerizations. Macromolecules 30:5192–5194
Neugebauer D, Sumerlin BS, Matyjaszewski K, Goodhart B, Sheiko SS (2004) How dense are cylindrical brushes grafted from a multifunctional macroinitiator? Polymer 45:8173–8179
Nielsen JK, Rasmussen HK, Denberg M, Almdal K, Hassager O (2006) Nonlinear branch-point dynamics of multiarm polystyrene. Macromolecules 39:8844–8853
Ogura K, Takahashi M (2000) Uniaxial extensional flow and thermoformability of PMMA melts with very high molecular weight component. Nihon Reoroji Gakkaishi 28:99–103
Ogura K, Wagner MH (2013) Rheological characterization of cross-linked poly(methyl methacrylate). Rheol Acta 52:753–765
Rolón-Garrido VH (2014) The molecular stress function (MSF) model in rheology. Rheol Acta 53:663–700
Rolón-Garrido VH, Wagner MH (2007) The MSF model: relation of nonlinear parameters to molecular structure of long-chain branched polymer melts. Rheol Acta 46:583–593
Rolón-Garrido VH, Luo J, Wagner MH (2011) Enhancement of strain-hardening by thermo-oxidative degradation of low-density polyethylene. Rheol Acta 50:519–535
Roovers J (1984) Melts rheology of H-shaped polystyrenes. Macromolecules 17:1196–1200
Ruymbeke E, Muliawan EB, Hatzikiriakos SG, Watanabe T, Hirao A, Vlassopoulos D (2010) Viscoelasticity and extensional rheology of model Cayley-tree polymers of different generations. J Rheol 54:643–662
Takahashi T, Takimoto J, Koyama K (1999a) Elongational viscosity for miscible and immiscible polymer blends. I. PMMA and AS with similar elongational viscosity. J Appl Polym Sci 73:757–766
Takahashi T, Takimoto J, Koyama K (1999b) Elongational viscosity for miscible and immiscible polymer blends. II. Blends with a small amount of UHMW polymer. J Appl Polym Sci 72:961–969
Wagner MH, Rolón-Garrido VH (2008) Verification of branch point withdrawal in elongational flow of pom-pom polystyrene melt. J Rheol 52:1049–1068
Wagner MH, Rubio P, Bastian H (2001) The molecular stress function model for polydisperse polymer melts with dissipative convective constraint release. J Rheol 45:1387–1412
Wagner MH, Yamaguchi M, Takahashi M (2003) Quantitative assessment of strain hardening of low-density polyethylene melts by the molecular stress function model. J Rheol 47:779–793
Wagner MH, Hepperle J, Münstedt H (2004) Relating rheology and molecular structure of model branched polystyrene melts by molecular stress function theory. J Rheol 48:489–503
Winter HH, Mours M (2007) Iris developments, http://rheology.tripod.com/
Wu S (1970) Surface and interfacial tensions of polymer melts. II. Poly(methyl methacrylate), poly(n-butyl methacrylate), and polystyrene. J Phys Chem 74:632–638
Wu S (1989) Chain structure and entanglement. J Polym Sci B 27:723–741
Acknowledgments
We thank S. Murao and S. Nakamoto of Sumitomo Chemical for their assistance in polymer synthesis. Part of this work was performed during the research stay of K.O. at TU Berlin.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manfred H. Wagner is the chair of Polymer Engineering/Polymer Physics, Berlin Institute of Technology (TU Berlin).
Rights and permissions
About this article
Cite this article
Ogura, K., Morioka, K., Tsujii, Y. et al. Uniaxial extensional flow behavior of comb-shaped poly(methyl methacrylate). Rheol Acta 54, 637–645 (2015). https://doi.org/10.1007/s00397-015-0848-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00397-015-0848-9