Erratum to: Colloid Polym Sci (2016) 294:1143–1151
DOI 10.1007/s00396-016-3874-y
The original version of this paper contained an error.
The first sentence in the “Materials and preparation” subsection under “Experimental” section should be changed.
From:
“In this study, a high-viscosity, natural PA 11 extrusion grade Rilsan BESNO TL from Atofina with a melting volume index of 1 cm3 (10 min) − 1 (235 °C, 2.16 kp) was used [1].”
To:
“In this study, high-viscosity extrusion-grade PA 11 Rilsan from Atofina was used [1]. It contained BBSA plasticizer, with its amount of less than 7.5 % controlled by blending neat (BESNO TL) and plasticizer-containing (BESNO P20 TL) grades.”
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1007/s00396-016-3874-y.
Rights and permissions
About this article
Cite this article
Jariyavidyanont, K., Focke, W. & Androsch, R. Erratum to: Crystallization kinetics of polyamide 11 in the presence of sepiolite and montmorillonite nanofillers. Colloid Polym Sci 294, 1391 (2016). https://doi.org/10.1007/s00396-016-3910-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00396-016-3910-y