Skip to main content
Log in

In situ preparation of gold nanospheres in bead composed of alginate/poly(N-isopropylacrylamide-co-dimethyl aminoethyl methacrylate) and photothermal controlled release

  • Original Contribution
  • Published:
Colloid and Polymer Science Aims and scope Submit manuscript

Abstract

Near-infrared (NIR)-responsive beads were developed by reducing gold ions electrostatically captured in the bead matrix composed of alginate and poly(N-isopropylacrylamide-co-dimethyl aminoethyl methacrylate) (PNIPAM-DMAEMA). PNIPAM-DMAEMAs (95/5 and 85/15, molar ratio) were included as a thermo-responsive polymer. The beads were prepared by dropping mixture solution of alginate/PNIPAM-DMAEMA (0.6 % (w/v)/2.4 % (w/v)) into gold ions solution (100 mM). The gold ions in the bead matrix could be converted to gold nanosphere (10–13 nm in diameter) using sodium citrate as a reducing agent. The SEM-EDS revealed that gold nanospheres were dispersed in the bead matrix. The content of gold nanosphere in alginate/PNIPAM-DMAEMA (95/5) bead and PNIPAM-DMAEMA (85/15) bead, evaluated spectrophotometrically, was 3.19 and 0.91 %, respectively. The bead suspensions (1 %, w/v) were readily heated over 40 °C in 5 min upon NIR (808 nm, 2 W) irradiation. The release of FITC-dextran from PNIPAM-DMAEMA beads was significantly promoted by the irradiation. Due to the heat generated by the surface plasmon resonance of the gold nanospheres, the thermo-responsive polymer would undergo a thermal contraction and the pores of the bead matrix might be widened, leading to a facilitated release.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Wust P, Hildebrandt B, Sreenivasa G, Rau B, Gellermann J, Riess H, Felix R, Schlag PM (2002) Hyperthermia in combined treatment of cancer. Lancet Oncol 3:489–497

    Article  Google Scholar 

  2. Overqaard J (1989) The current and potential role of hyperthermia in radiotherapy. Int J Radiat Oncol Biol Phys 16:535–549

    Article  Google Scholar 

  3. Ito A, Honda H, Kobayasi T (2006) Cancer immunotherapy based on intracellular hyperthermia using magnetite nanoparticles: a novel concept of “heat-controlled necrosis” with heat shock protein expression. Cancer Immunol Immunother 55:320–328

    Article  CAS  Google Scholar 

  4. Burdon RH, Slater A, McMahon M, Cato AC (1982) Hyperthermia and the heat-shock proteins of HeLa cells. Br J Cancer 45:953–963

    Article  CAS  Google Scholar 

  5. Huang X, Jain PK, El-Sayed IH, El-Sayed MA (2008) Plasmonic photothermal therapy (PPTT) using gold nanoparticles. Lasers Med Sci 23:217–228

    Article  Google Scholar 

  6. Ghosh P, Han G, De D, Kim CK, Rotello VM (2008) Gold nanoparticles in delivery applications. Adv Drug Deliv Rev 60:1307–1315

    Article  CAS  Google Scholar 

  7. Huang X, El-Sayed IH, Qian W, El-Sayed MA (2006) Cancer cell imaging and photothermal therapy in the near-infrared region by using gold nanorods. J Am Chem Soc 128:2115–2120

    Article  CAS  Google Scholar 

  8. Norman TJ, Grant CD, Magana D, Zhang JZ, Liu J, Cao DL, Bridges F, Van Buuren A (2002) Near infrared optical absorption of gold nanoparticle aggregates. J Phys Chem B 106:7005–7012

    Article  CAS  Google Scholar 

  9. Roper DK, Ahn W, Hoepfner M (2007) Microscale heat transfer transduced by surface plasmon resonant gold nanoparticles. J Phys Chem C 111:3636–3641

    Article  CAS  Google Scholar 

  10. Logunov SL, Ahmadi TS, El-Sayed MA (1997) Electron dynamics of passivated gold nanocrystals probed by subpicosecond transient absorption spectroscopy. J Phys Chem B 101:3713–3719

    Article  CAS  Google Scholar 

  11. Bajpai SK, Sharma S (2004) Investigation of swelling/degradation behaviour of alginate beads crosslinked with Ca2+ and Ba2+ ions. React Funct Polym 59:129–140

    Article  CAS  Google Scholar 

  12. Albarghouthi M, Fara DA, Saleem M, El-Thaher T, Matalka K, Badwan A (2000) Immobilization of antibodies on alginate-chitosan beads. Int J Pharm 206:23–34

    Article  CAS  Google Scholar 

  13. Kang MK, Kim J–C (2010) FITC-dextran releases from chitosan microgel coated with poly(N-isopropylacrylamide-co-methacrylic acid). Polym Test 29:784–792

    Article  CAS  Google Scholar 

  14. Pelton R (2010) Poly(N-isopropylacrylamide) (PNIPAM) is never hydrophobic. J Colloid Interface Sci 348:673–674

    Article  CAS  Google Scholar 

  15. Kim J–C, Kim J–D (2002) Release property of temperature-sensitive liposome containing poly(N-isopropylacrylamide). Colloid Surf B-Biointerfaces 24:45–52

    Article  CAS  Google Scholar 

  16. Kang MK, Lee HY, Kim J–C (2010) Release property of alginate beads coated with poly(N-isopropylacrylamide-co-dimethylaminoethylmethacrylate). J Dispers Sci Technol 31:1685–1690

    Article  CAS  Google Scholar 

  17. Lee MS, Kim J–C (2010) β-Cyclodextrin hydrogel incorporating hydrophobically modified poly(N-isopropylacrylamide) for a temperature-dependent release. Polym Adv Technol 23:425–430

    Article  Google Scholar 

  18. Kang MK, Kim J–C (2010) Preparation and release property of alginate beads immobilizing poly(N-isopropylacrylamide-co-dimethylamino ethyl methacrylate). Polymer (Korea) 34:79–83

    CAS  Google Scholar 

  19. Zhang J, Xie R, Zhang S–B, Cheng C–J, Ju X–I, Chu LY (2009) Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains. Polymer 50:2516–2525

    Article  CAS  Google Scholar 

  20. Huang H, Yang X (2003) Chitosan mediated assembly of gold nanoparticles multilayer. Colloids Surf A-Physicochem Eng Asp 226:77–86

    Article  CAS  Google Scholar 

  21. Tabrizi A, Ayhan F, Ayhan H (2009) Gold nanoparticle synthesis and characterisation. Hacet J Bio Chem 37:217–226

    Article  Google Scholar 

  22. El-Brolossy TA, Abdallah T, Mohamed MB, Abdallah S, Easawi K, Negm S, Talaat H (2008) Shape and size dependence of the surface plasmon resonance of gold nanoparticles studied by photoacoustic technique. Eur Phys J Spec Top 153:361–364

    Article  Google Scholar 

  23. Kim MH, Kim J–C, Lee HY, Kim JD, Yang JH (2005) Release property of temperature-sensitive alginate beads containing poly(N-isopropylacrylamide). Colloids Surf B-Biointerfaces 46:57–61

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This research was supported by the Technological Innovation R&D Program (S2127757) funded by Small and Medium Business Administration (SMBA, Korea).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jin-Chul Kim.

Electronic supplementary material

Below is the link to the electronic supplementary material.

ESM 1

(DOCX 120 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Seo, H.J., Kim, JC. In situ preparation of gold nanospheres in bead composed of alginate/poly(N-isopropylacrylamide-co-dimethyl aminoethyl methacrylate) and photothermal controlled release. Colloid Polym Sci 293, 1425–1435 (2015). https://doi.org/10.1007/s00396-015-3524-9

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00396-015-3524-9

Keywords

Navigation