Abstract
In this article, harmony search algorithm was developed for optimum design of steel frames. Harmony search is a meta-heuristic search method that has been developed recently. It bases on the analogy between the performance process of natural music and searching for solutions to optimization problems. The objective of the design algorithm is to obtain minimum weight frames by selecting suitable sections from a standard set of steel sections such as American Institute of Steel Construction (AISC) wide-flange (W) shapes. Strength constraints of AISC load and resistance factor design specification and displacement constraints were imposed on frames. The effectiveness and robustness of harmony search algorithm, in comparison with genetic algorithm and ant colony optimization-based methods, were verified using three steel frames. The comparisons showed that the harmony search algorithm yielded lighter designs.
Similar content being viewed by others
References
American Institute of Steel Construction (2001) Manual of steel construction: load and resistance factor design. Chicago
Camp CV, Bichon BJ (2004) Design of space trusses using ant colony optimization. J Struct Eng ASCE 130:741–751
Camp CV, Pezeshk S, Cao G (1998) Optimized design of two-dimensional structures using a genetic algorithm. J Struct Eng ASCE 124:551–559
Camp CV, Bichon BJ, Stovall SP (2005) Design of steel frames using ant colony optimization. J Struct Eng ASCE 131:369–379
Dorigo M, Maniezzo V, Colorni A (1992) An investigation of some properties of an ant algorithm. Proc. 1992 Parallel Problem Solving from Nature Conf., Elsevier, Amsterdam, pp 509–520
Dumonteil P (1992) Simple equations for effective length factors. Eng J AISC 3:111–115
Geem ZW (2006a) Optimal cost design of water distribution networks using harmony search. Eng Optimiz 38:259–280
Geem ZW (2006b) Improved harmony search from ensemble of music players. Lec Notes Artif Intel 4251:86–93
Geem ZW, Kim JH, Loganathan GV (2001) A new heuristic optimization algorithm: harmony search. Simulation 76:60–68
Goldberg DE (1989) Genetic algorithms in search, optimization and machine learning. Addison-Wesley, Reading, MA
Hayalioglu MS (2000) Optimum design of geometrically non-linear elastic-plastic steel frames via genetic algorithm. Comput Struct 77:527–538
Hayalioglu MS (2001) Optimum load and resistance factor design of steel space frames using genetic algorithm. Struct Multidisc Optim 21:292–299
Hayalioglu MS, Degertekin SO (2004) Design of non-linear steel frames for stress and displacement constraints with semi-rigid connections via genetic optimization. Struct Multidisc Optim 27:259–271
Hayalioglu MS, Degertekin SO (2005) Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization. Comput Struct 40:1849–1863
Jenkins WM (1991) Towards structural optimization via the genetic algorithm. Comput Struct 40:1321–1327
Jenkins WM (1992) Plane frame optimum design environment based on genetic algorithm. J Struct Eng ASCE 118:3103–3112
Kameshki ES, Saka MP (2001) Optimum design of nonlinear steel frames with semi rigid connections using a genetic algorithms. Comput Struct 79:1593–1604
Kameski ES, Saka MP (2003) Genetic algorithm based optimum design of nonlinear planar steel frames with various semirigid connections. J Constr Steel Res 59:109–134
Kaveh A, Kalatraji V (2002) Genetic algorithm for discrete-sizing optimal design of trusses using the force method. Int J Numer Meth Engng 55:55–72
Kaveh A, Kalatraji V (2004) Size/geometry optimization of trusses by the force method and genetic algorithm. Z Angew Math Mech 84:347–357
Kaveh A, Rahami H (2006) Nonlinear analysis and optimal design of structures via force method and genetic algorithm. Comput Struct 84:770–778
Kim JH, Geem ZW, Kim ES (2001) Parameter estimation of the nonlinear Muskingum model using harmony search. J Amer Wat Resour As 37:1131–1138
Lee KS, Geem ZW (2004) A new structural optimization method based on the harmony search algorithm. Comput Struct 82:781–798
Lee KS, Geem ZW (2005) A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice. Comp Meth Appl Mech Eng 194:3902–3933
Lee KS, Geem ZW, Lee SH, Bae KW (2005) The harmony search heuristic algorithm for discrete structural optimization. Eng Optimiz 37:663–684
Paik K, Jeong JH, Kim JH (2001) Use of a harmony search for optimal design of coffer dam drainage pipes. J Korean Soc Civil Eng 21:119–128
Pezeshk S, Camp CV, Chen D (2000) Design of nonlinear framed structures using genetic optimization. J Struct Eng ASCE 126:382–388
Rajeev S, Krishnamoorthy CS (1992) Discrete optimization of structures using genetic algorithms. J Struct Eng ASCE 118:1233–1250
Shrestha SM, Ghaboussi J (1998) Evolution of optimum structural shapes using genetic algorithm. J Struct Eng ASCE 124:1331–1338
Toropov VV, Mahfouz SY (2001) Design optimization of structural steelwork using a genetic algorithm, FEM and a system of design rules. Eng Comp: Int J Computer-Aided Eng Softw 18:437–459
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Degertekin, S.O. Optimum design of steel frames using harmony search algorithm. Struct Multidisc Optim 36, 393–401 (2008). https://doi.org/10.1007/s00158-007-0177-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0177-4